Provenance of buried esker groundwater: the case of Vars-Winchester esker aquifer,Eastern Ontario,Canada

An innovative mode of groundwater recharge to a buried esker aquifer is considered. The current conceptual model affords a natural safeguard to underlying aquifers from the overlying muds. A hypothesis of groundwater recharge to a buried esker aquifer via preferential pathways across its overlying muds is tested here by heuristic numerical one-dimensional and two-dimensional modeling simulations. The hypothesis has been tested against two other conventionally accepted scenarios involving: (1) distal esker outcrop areas and (2) remote shallow-bedrock recharge areas. The main evidence comes from documented recharge pressure pulses in the overlying mud aquitard and in the underlying esker hydraulic-head time series for the Vars-Winchester esker aquifer in Eastern Ontario, Canada. These perturbations to the potentiometric surface are believed to be the aquifer response to recharge events. The migration rate of these pressure pulses is directly related to the hydraulic diffusivity of the formation. The measured response time and response amplitude between singular radar precipitation events and well hydrographs constituted the heuristic model calibration targets. The main evidence also includes mud-layering deformation (water escape features) which was observed in seismic surveys of the over-esker muds. These disturbed stratigraphic elements provide a realistic mechanism for migrating water to transit through the muds. The effective hydraulic conductivities of these preferential pathways in the muds were estimated to be between 2?×?10^?6 and 7?×?10^?6 m/s. The implications of these findings relate to the alleged natural safeguard of these overlying muds.     

新疆东准乌须克劳格岩体LA-ICP-MS锆石U-Pb年龄、Hf同位素特征及其地质意义

新疆东准噶尔琼河坝地区近年来找矿获得重大突破,发现了一系列重要的矿产,这些矿产基本上围绕该地区出露面积最大的乌须克劳格岩体分布。该岩体组成比较复杂,主要岩性为二长花岗岩和花岗闪长岩。采用LA-ICP-MS技术测得花岗闪长岩和二长花岗岩锆石~(206)Pb/~(238)U年龄分别为428.9±1.9Ma和427.2±1.7Ma,被解释为岩石的结晶年龄。2类岩石都属于过铝质-钙碱性系列花岗岩,具有较高的铝、钙含量,K_2O/Na_2O值普遍偏低,介于0.15~0.40之间;稀土元素配分曲线呈现右倾特征,稀土元素总量较低,轻稀土元素相对富集,负Eu异常不明显;在微量元素原始地幔标准化蛛网图上,高场强元素Th、Nb、Ta、P、Ti等相对亏损,大离子亲石元素Rb、Ba、U、K、Sr等相对富集,具有高Ba、Sr含量和高(La/Yb)_N、Sr/Y值,显示出高Ba-Sr花岗岩的特征;同时岩体具有高正ε_(Hf)(t)值和年轻的模式年龄。这些地球化学和同位素特征表明,晚志留世乌须克劳格岩体是大陆边缘弧环境下大洋板片熔融的产物。     

天水盆地新近纪伸展构造——来自沉积与构造变形方面的证据

天水盆地位于青藏高原东北缘高海拔挤压隆升区与鄂尔多斯低海拔伸展区的过渡部位,新构造活动强烈。然而,新构造活动对天水盆地的影响尚不清楚。通过对盆地的沉积环境、构造沉降、构造变形等方面的研究,结果显示:1盆地由风成堆积、洪积扇、河湖相与湖泊相沉积组成,代表沉积中心的河湖相与湖泊相沿控盆断裂(西秦岭北缘断裂、西和断裂与礼县-罗家堡断裂)分布;2盆地经历了16~14Ma、9.2~7.4Ma和3.6~2.6Ma三次加速沉降期;3控盆断裂在同沉积期为正断层。沉积中心沿断裂分布、快速沉降事件及生长正断层表明,天水盆地至少在中新世晚期受控于走滑伸展构造,记录了青藏高原向北东方向的构造挤出作用。     

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.     

Preparation of iron phosphate from sludge sourced from the electrocoagulation treatment of source-separated urine

In order to prepare iron phosphate by waste sludge, we report a method for effective utilization of the sludge obtained from the electrocoagulation treatment of source-separated urine. The sludge was dissolved with hydrochloric acid and pretreated with H₂O₂ and Na₃PO₄; finally, NaOH was added to precipitate iron phosphate from the solution. Thermal treatment of the precipitate at 750 °C in air yielded crystalline quartz-like anhydrous FePO₄. The precipitate was characterized by a number of thermal techniques such as thermogravimetry/differential thermal analysis, scanning electron microscopy, and X-ray powder diffraction.     

Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.     

Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction

Blasting is a widely used technique for rock fragmentation in opencast mines and tunneling projects. Ground vibration is one of the most environmental effects produced by blasting operation. Therefore, the proper prediction of blast-induced ground vibrations is essential to identify safety area of blasting. This paper presents a predictive model based on gene expression programming (GEP) for estimating ground vibration produced by blasting operations conducted in a granite quarry, Malaysia. To achieve this aim, a total number of 102 blasting operations were investigated and relevant blasting parameters were measured. Furthermore, the most influential parameters on ground vibration, i.e., burden-to-spacing ratio, hole depth, stemming, powder factor, maximum charge per delay, and the distance from the blast face were considered and utilized to construct the GEP model. In order to show the capability of GEP model in estimating ground vibration, nonlinear multiple regression (NLMR) technique was also performed using the same datasets. The results demonstrated that the proposed model is able to predict blast-induced ground vibration more accurately than other developed technique. Coefficient of determination values of 0.914 and 0.874 for training and testing datasets of GEP model, respectively show superiority of this model in predicting ground vibration, while these values were obtained as 0.829 and 0.790 for NLMR model.     

Must critical state theory be revisited to include fabric effects?

Critical state (CS) is a physically observed state of granular materials at failure, based on which the critical state theory (CST) was founded. CST attempts to describe analytically the material response when CS failure occurs and constitutes the framework within which constitutive modeling techniques have been developed in the last half-century. The conditions of CST defined as necessary and sufficient to characterize CS do not include fabric orientation of material samples. In the present work, this absence of fabric is discussed in light of a newly developed anisotropic critical state theory (ACST) that enhances the classical CST by introducing an additional condition that fabric must satisfy at CS. The use of ACST framework in constitutive modeling is presented in a generic way, usable in conjunction with various constitutive models that comply with CST. Answers to some fundamental questions are attempted or suggested, e.g., as to whether the conditions of classical CST are necessary and sufficient for CS to occur, whether the ACST is simply a convenient supplement to CST or a necessary enhancement, and if the latter is true, the merits and open questions that arise. The presentation focuses on the justification and thoughts behind the proposed specific features of ACST, provides clarifications not made before, while several suggestions and disclaimers are made, and alternate approaches are proposed for further investigations on the subject matter.     

Autonomic visiting in digital 3D scenes

Human-machine interactive visiting and fixed-route visiting are currently the main roaming modes in digital three-dimensional (3D) scenes. However, in general, when a person visits an attraction area, s/he does not follow a fixed path, but instead wander about according to his/her interests. Here, we propose a new roaming mode, called autonomic visiting. That is, in a digital 3D scene, a user selects several interest spots, then a route connecting these spots can be automatically determined and 3D scene can be seen along this route. This study presents a technical approach that enables the realization of autonomic visiting in 3D scenes. Firstly, Delaunay triangular meshes for the terrain in 3D scene are established. Secondly, a plane-growth algorithm and a line-connection algorithm are introduced to automatically mend the broken parts of these triangular meshes. Thirdly, the triangular meshes are then merged and differently weighted according to different layers. Finally, a progress-zone transmission algorithm is presented to optimal the shortest route, which is derived from A-Star (A*) algorithm. Digital 3D campus of Nanjing University, China, is taken as the experimental materials. The experimental results prove the effect of the proposed approach.     

An experimental database for the development,calibration and verification of constitutive models for sand with focus to cyclic loading: part I—tests with monotonic loading and stress cycles

For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such a model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. The purpose of these two companion papers was to provide such database collected for a fine sand. The database consists of numerous undrained cyclic triaxial tests with stress or strain cycles applied to samples consolidated isotropically or anisotropically. Monotonic triaxial tests with drained or undrained conditions have also been performed. Furthermore, drained triaxial, oedometric or isotropic compression tests with several un- and reloading cycles are presented. Part I concentrates on the triaxial tests with monotonic loading or stress cycles. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain.