Effects of soil type and fertilizer on As speciation in rice paddy contaminated with As-containing pesticide

Inorganic arsenic (As) pesticides have been widely used for decades in many countries. However, insufficient data are available on the chemical speciation of inorganic arsenicals in tropical paddy soils. Inorganic As-containing pesticides were used in tropical countries, a few decades ago, however, their fate have not been studied. Hence, the objective of this study was to determine fractionation of inorganic arsenicals and to assess As lability with/without fertilizer application using a static incubation experiment. Eight soils from wet and dry regions of Sri Lanka were amended with 1,000 mg/kg arsenate for this purpose. The FT-IR and XRF results suggested that soils in the wet region were rich in Fe/Al-oxides. Paddy soils in the dry zone showed high As lability. These low-humic gley soils have low Fe/Al oxyhydroxide and alkaline pH. In contrast, the wet zone had soils with higher As retention capacity, high amounts of Fe/Al oxyhydroxide, and acidic pH. Arsenic lability increased considerably 30 days after fertilizer application. Overall, As lability was mainly influenced by soil mineralogical and chemical properties, i.e., Fe/Al oxyhydroxide, pH, organic matter, and fertilizer application.     

ANALYTICAL AERIAL TRIANGULATION BLOCK ADJUSTMENT; THE DIRECT HEIGHT SOLUTION INCORPORATING TIE-STRIPS

The historical development of analytical aerial triangulation block adjustment is mentioned by way of introduction. The advantages of separating the plan and height adjustments are given and the observation equations of a typical adjustment section are analysed to show that this convenient practice is justified in normal circumstances. The principles of a direct solution of the normal equations suitable for a moderate-sized computer, are explained and developed in detail for the height adjustment. The advantages of tie-strips in the height adjustment are demonstrated and the difficulties which then arise are discussed. An approximate method which overcomes these difficulties is developed. Details of the computer programmes used are given in Appendix B.     

Dynamical downscaling of future sea level change in the western North Pacific using ROMS

The future regional sea level (RSL) rise in the western North Pacific is investigated by dynamical downscaling with the Regional Ocean Modeling System (ROMS) with an eddy-permitting resolution based on three global climate models—MIROC-ESM, CSIRO-Mk3.6.0, and GFDL-CM3—under the highest greenhouse-gas emission scenario. The historical run is forced by the air-sea fluxes calculated from Coordinated Ocean Reference Experiment version 2 (COREv2) data. Three future runs—ROMS-MIROC, ROMS-CSIRO, and ROMS-GFDL—are forced with an atmospheric field constructed by adding the difference between the climate model parameters for the twenty-first and twentieth century to fields in the historical run. In all downscaling, the RSL rise along the eastern coast of Japan is generally half or less of the RSL rise maxima off the eastern coast. The projected regional (total) sea level rises along the Honshu coast during 2081–2100 relative to 1981–2000 are 19–25 (98–104), 6–15 (71–80), and 8–14 (80–86) cm in ROMS-MIROC, ROMS-CSIRO, and ROMS-GFDL, respectively. The discrepancies of the RSL rise along the Honshu coast between the climate models and downscaling are less than 10 cm. The RSL changes in the Kuroshio Extension (KE) region in all downscaling simulations are related to the changes of KE (northward shift or intensification) with climate change.     

Way forward to achieve sustainable and cost-effective biofuel production from microalgae: a review

Driven by policies aimed at enhancing energy security and mitigating greenhouse gas emissions, the production and use of biofuels have significantly increased in recent years. Microalgae owing to its multiple advantages which include high lipid content, sustainable biomass production, effective land and water utilization are the most potential biofuel feedstock that can provide drop-in fossil fuel replacements without stimulating competition for agricultural resources and are considered to be more environmentally benign than the first- and second-generation biofuel feedstocks. However, there are many existing technical and scientific impediments that are yet to be resolved. Keeping this in view, the present review provides a concise account of the microalgal species known to accumulate high levels of lipid and describes the main factors that should be taken into consideration while selecting suitable algal strains for mass cultivation. The underlining advantages and limitations of raceway pond and photobioreactor cultivation systems are also examined. The recent advances in genetic engineering of microalgae to improve biomass and lipid productivity are then highlighted, which include the ongoing debate over the biosafety issues pertinent to the use of genetically modified algae. Furthermore, a wide range of high-value products that can be co-produced from microalgae have been discussed. The review concludes with a comprehensive summary of the major techno-economic constraints to commercialization of algal-derived biofuels along with promising methods for overcoming these challenges in order to produce cost-competitive and environmentally sustainable biofuel.     

Noril’sk–Talnakh Cu–Ni–PGE deposits: a revised tectonic model

The Norilsk mining district is located at the northwest margin of the Tunguska basin, in the centre of the 3,000×4,000 km Siberian continental flood basalt (CFB) province. This CFB province was formed at the Permo-Triassic boundary from a superplume that ascended into the geometric centre of the Laurasian continent, which was surrounded by subducting slabs of oceanic crust. We suggest that these slabs could have reached the core–mantle boundary, and they may have controlled the geometric focus of the superplume. The resulting voluminous magma intruded and erupted in continental rifts and related extensive flood basalt events over a 2–4 Ma period. Cu–Ni–PGE sulfide mineralization is found in olivine-bearing differentiated mafic intrusions beneath the flood basalts at the northwestern margin of the Siberian craton and also in the Taimyr Peninsula, some 300 km east of a triple junction of continental rifts, now buried beneath the Mesozoic–Cenozoic sedimentary basin of western Siberia. The Norilsk-I and Talnakh-Oktyabrsky deposits occur in the Norilsk–Kharaelakh trough of the Tunguska CFB basin. The Cu–Ni–PGE-bearing mineralized intrusions are 2–3 km-wide and 20 km-long differentiated chonoliths. Previous studies suggested that parts of the magma remained in intermediate-level crustal chambers where sulfide saturation and accumulation took place before emplacement. The 5–7-km-thick Neoproterozoic to Palaeozoic country rocks, containing sedimentary Cu mineralization and evaporites, may have contributed additional metal and sulfur to this magma. Classic tectonomagmatic models for these deposits proposed that subvertical crustal faults, such as the northeast-trending Norilsk–Kharaelakh fault, were major trough-parallel conduits providing access for magmas to the final chambers. However, geological maps of the Norilsk region show that the Norilsk–Kharaelakh fault offsets the mineralization, which was deformed into folds and offset by related reverse faults, indicating compressional deformation after mineralization in the Late Triassic to Early Jurassic. In addition, most of the intrusions are sills, not dykes as should be expected if the vertical faults were major conduits. A revised tectonic model for the Norilsk region takes into account the fold structure and sill morphology of the dominant intrusions, indicating a lateral rather than vertical emplacement direction for the magma into final chambers. Taking into account the fold structure of the country rocks, the present distribution of the differentiated intrusions hosting the Norilsk-I and Talnakh–Oktyabrsky deposits may represent the remnants of a single, >60 km long, deformed and eroded palm-shaped cluster of mineralized intrusions, which are perceived as separate intrusions at the present erosional level. The original direction of sill emplacement may have been controlled by a northeast-trending paleo-rise, which we suggest is present at the southeastern border of the Norilsk–Kharaelakh trough based on analysis of the unconformity at the base of the CFB. The mineralized intrusions extend along this rise, which we interpret as a structure that formed above the extensionally tilted block in the metamorphic basement. Geophysical data indicate the presence of an intermediate magma chamber that could be linked with the Talnakh intrusion. In turn, this T-shaped flat chamber may link with the Yenisei–Khatanga rift along the northwest-trending Pyasina transform fault, which may have served as the principal magma conduit to the intermediate chamber. It then produced the differentiated mineralized intrusions that melted through the evaporites with in situ precipitation of massive, disseminated, and copper sulfide ore. The Norilsk–Kharaelakh crustal fault may not relate to mineralization and possibly formed in response to late Mesozoic spreading in the Arctic Ocean.Editorial handling: P. Lightfoot     

A comparison of methods of strain determination in rocks from southwest Dyfed (Pembrokeshire) and adjacent areas

A variety of methods devised in the last twelve years for measuring two-dimensional strain ratios have been applied to the same deformed oolitic limestone from southwest Dyfed. Their relative merits are discussed. A graphical method for studying relative locations of marker objects is described and its application to a variety of rocks illustrated. It is shown to have theoretical and practical advantages, while giving values of two-dimensional strain ratios comparable with those of other methods.     

Recognition of the Cambrian Timan–Severnaya Zemlya orogen and timing of geological evolution of the North Kara sedimentary basin based on detrital zircon dating

New data on the ages of detrital zircons from folded basement rocks and cover sediments of the Severnaya Zemlya archipelago and Izvestiy TSIK islands have been obtained. The basement age is defined as Cambrian (pre-Ordovician). The Ordovician and Silurian sandstones were mainly formed by erosion of the basement rocks. The Devonian sandstones were formed by debris sourced from the Caledonian orogen. The Carboniferous–Early Permian molasse was formed simultaneously with the erosion of the Carboniferous granitoids and weathering of the Ordovician volcanic arc rocks and the Cambrian basement. The North Kara basin was formed in the Ordovician as a back-arc basin. It experienced its main compression deformations at the boundary of the Devonian and Carboniferous and in the Carboniferous.     

Effect of major ion variations in the marine environment on the specific gravity-conductivity-chlorinity-salinity relationship

Partial equivalent conductances and partial equivalent volumes of the major constituents in seawater were used to evaluate the specific gravity-conductivity-chlorinity-salinity relationships in the marine environment. For example, in the open ocean, the relationships between Cl‰ and both S‰ and specific gravity are valid to within 0.014‰ and 0.014 σ_t, respectively. The relationships between conductivity and S‰ and specific gravity are valid to within 0.006‰ and 0.007 σ_t. In river diluted nearshore areas specific gravity anomalies inferred from Cl‰, can be as great as 0.06 σ_t and 0.04 σ_t when inferred from a conductivity ratio measurement.     

Evaporative weathering of petroleum residues: The age of pelagic tar

The rate of evaporative weathering of a component of crude oil residue is assumed to be proportional to its equilibrium vapor pressure and to the amount remaining in the sample. This model is tested using literature data on normal paraffin profiles of crude oil weathered artificially and gas chromatographic data on crude oil residues weathered on rocky shores. Semiquantitative agreement over the time range from 1 to 400 days is demonstrated. Application of the model to gas chromatograms of pelagic tar lumps collected at Station S near Bermuda in 1972 implies that most of these lumps were formed by fragmentation of much larger and older masses, some within less than one day of the time they were collected. The weathering of pelagic tar thus involves a great deal more physical fragmentation than was previously supposed.     

Beach accretion and erosion, Burullus-Gamasa coast, Egypt

Several areas of erosion and accretion were observed along the Burullus-Gamasa beach. The accreted sands are coarser and less sorted than the eroded ones. Differentiation between them could be achieved on the basis of their grain-size fractions, shape of grain-size distribution curves and statistical grain-size parameter relationships.