Determining effective wellbore permeability from a field pressure test: a numerical analysis of detection limits

We propose a simple pressure test that can be used in the field to determine the effective permeability of existing wellbores. Such tests are motivated by the need to understand and quantify leakage risks associated with geological storage of CO₂ in mature sedimentary basins. If CO₂ is injected into a deep geological formation, and the resulting CO₂ plume encounters a wellbore, leakage may occur through various pathways in the “disturbed zone” surrounding the well casing. The effective permeability of this composite zone, on the outside of the well casing, is an important parameter for models of leakage. However, the data that exist on this key parameter do not exist in the open literature, and therefore specific field tests need to be done in order to reduce the uncertainty inherent in the leakage estimates. The test designed and analyzed herein is designed to measure effective wellbore permeability within a low-permeability caprock, bounded above and below by permeable reservoirs, by pressurizing the reservoir below and measuring the response in the reservoir above. Alternatively, a modified test can be performed within the caprock without directly contacting the reservoirs above and below. We use numerical simulation to relate pressure response to effective well permeability and then evaluate the range of detection of the effective permeability based on instrument measurement error and limits on fracture pressure. These results can guide field experiments associated with site characterization and leakage analysis.     

New chitinozoans from the historical type area of the Hirnantian Stage and additional key sections in the Wye Valley,Wales, UK

The type locality for several core elements of the Hirnantia brachiopod fauna is a small disused quarry on the western slopes of Cwm Hirnant. There, the Hirnant Limestone Member of the Foel‐y‐Ddinas Mudstone Formation yields a new, well‐preserved chitinozoan assemblage, attributed to the Spinachitina taugourdeaui Biozone. This allows tight correlation with the Hirnantian of Baltica and Laurentia and neatly ties the chitinozoan zonation with the classical brachiopod fauna. Nearby, the chitinozoan assemblage from the Caradoc Cymerig Limestone Member at Gelli‐grîn belongs to the Spinachitina cervicornis Biozone?, and is identical to that recovered from the Burrellian in the Onny Valley, Welsh Borderland. A Silurian assemblage higher up section, discovered in the Cwm‐yr‐Aethnen Formation, is attributed to the globally recognized Eisenackitina dolioliformis Biozone. Attempts to integrate the chitinozoan and graptolite biozonation, in the central Welsh Rhayader area, were less successful. Copyright © 2008 John Wiley & Sons, Ltd.     

Identification of potential sites for aquifer storage and recovery (ASR) in coastal areas using ASR performance estimation methods

Performance of freshwater aquifer storage and recovery (ASR) systems in brackish or saline aquifers is negatively affected by lateral flow, density effects, and/or dispersive mixing, causing ambient groundwater to enter ASR wells during recovery. Two recently published ASR performance estimation methods are applied in a Dutch coastal area, characterized by brackish-to-saline groundwater and locally high lateral-flow velocities. ASR performance of existing systems in the study area show good agreement with the predicted performance using the two methods, provided that local vertical anisotropy ratios are limited (<3). Deviations between actual and predicted ASR performance may originate from simplifications in the conceptual model and uncertainties in the hydrogeological and hydrochemical input. As the estimation methods prove suitable to predict ASR performance, feasibility maps are generated for different scales of ASR to identify favorable ASR sites. Successful small-to-medium-scale ASR varies spatially in the study area, emphasizing the relevance of reliable a priori spatial mapping.     

Middle-Late Alpine thermotectonic evolution of the southern Rhodope Massif,Greece

Abstract

The transition from the Alpine tectonic assembly to the exhumation of the units in the Rhodope metamorphic province in northernmost Greece has been refined by ⁴⁰Ar/³⁹Ar laserprobe mica analyses. Preservation of pre-Alpine (~ 280 Ma and 145 Ma) muscovite cooling ages at the western margin of the Rhodope indicate that subsequent events failed to reset the argon system thermally in white mica in the outcropping basement of this region. The central and eastern Rhodope are characterized by white mica cooling ages of 40–35 Ma with ages gradually decreasing to ca. 15 Ma near the eastern margin of the Strymon Valley. The Eo-Oligocene ages reflect the regional exhumation of the metamorphosed units to shallow crustal levels, with corresponding temperatures below ca. 350 °C, by 40–35 Ma. The younger cooling ages are attributed to the initiation and subsequent operation of the Strymon-Thasos detachment system since ca. 30 Ma. This study provides a crucial contribution to future regional tectonic models for the Rhodope region as it recognizes an early stage of development of the Strymon-Thasos detachment system, and has constrained the regional exhumation of the Rhodope metamorphic province since 40 Ma indicating that the regionally observed amphibolite facies metamorphism had terminated by this time. © 2000 Editions scientifiques et médicales Elsevier SAS     

Chemical and structural relations of epitaxial xenotime and zircon substratum in sedimentary and hydrothermal environments: a TEM study

Xenotime overgrowths on detrital zircon in siliciclastic sediments have been reported in numerous studies. However, in natural samples, solid solution of zircon and xenotime is limited to near-end-member compositions. In order to characterize the interface region between both minerals and to draw inferences on the growth mechanisms of authigenic xenotime, we studied xenotime overgrowths on detrital zircon grains from two Phanerozoic sandstone samples with contrasting post-depositional histories. In one sample, the small (≤10 μm), pyramidal xenotime overgrowths are of diagenetic origin and grew without major discontinuity on the detrital zircon grain. The second sample shows up to >50-μm-wide, porous and inclusion-rich, hydrothermal xenotime overgrowths on detrital zircon, whereas the transition zone between both minerals is accompanied by large pore volume. Chemical compositions of the xenotime precipitates from the two samples differ particularly in Y, REE, Th and Sc concentrations, whereas high MREE availability in the diagenetic sample and the presence of Sc in the hydrothermal sample, respectively, appear to have promoted xenotime growth. Transmission electron microscopy on electron-transparent foils cut from the interface region shows that both the diagenetic xenotime and the hydrothermal xenotime are crystalline and grew in optical and crystallographic continuity to their detrital zircon substrata. Only a narrow transition zone (≤90 nm—diagenetic sample, 200–300 nm—hydrothermal sample) between zircon and xenotime is in part made up of nanometre-scale crystalline domains that are slightly distorted and may have formed from dissolution–re-precipitation processes at the zircon rim along with precipitation from the respective fluid.     

Evidence for fullerenes in solid bitumen from pillow lavas of Proterozoic age from Mítov (Bohemian Massif, Czech Republic)

Andesitic pillow lavas containing biogenic, solid bitumen (SB) are a constituent of a Neoproterozoic volcanosedimentary sequence (Teplá-Barrandian unit, Bohemian Massif) in the Mítov area of the Czech Republic. A black shale formation that is crosscut by these andesitic basalts is 565 Ma old. Carbon disulfide extracts of two powdered samples of SB contain 0.2 and 0.3 ppm of C₆₀, respectively, as determined by high-pressure liquid chromatography. The peak assignment based on retention time is fully supported by high-resolution electron ionization mass spectrometry (EI-MS). No C₇₀ was detected, nor was C₆₀ found in two other SB samples from this locality. Other investigated carbonaceous samples from Bohemia (coals and anthracites of Upper Paleozoic age and anthraxolite, graphitoids, and graphite of Upper Proterozoic age) did not contain fullerenes at concentrations above the detection limit of 0.01 ppm. The absence of C₆₀ in these samples was confirmed by EI-MS. The proposed mechanism of fullerene formation involves a primary algal phase, generation of a hydrocarbonaceous mixture in the course of thermal evolution of the sedimentary series, and their high-temperature transformation related to the extrusion of basalt. An important feature for fullerene conservation was the enclosure of fullerenes in SB with a structure similar to glasslike carbon, where the fullerene was protected against oxidation.     

Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas

The possibility of filling empty underground spaces, which exist owing to the extraction of mineral raw materials, with fly ash and cement fly ash mixes has been studied for the purpose of reducing the impact of deep mining on the surface. The method of physical modelling was used to study the behaviour of fly ash mixes deposited in extracted mine spaces. The models were constructed for two different geometries of underground extracted mine spaces: into cavities of the type of large slits created in the course of mining in steeply lode deposits without subsequently filling the empty space and in vertical shafts of rectangular or circular cross-section with horizontal side headings that have partly caved in due to mine shocks or other seismic events.     

Timing of Holocene sand accumulation along the coast of central and SE Vietnam

In Vietnam, the coastal sand barriers and dunes located in front of the steep slopes of the high rising Truong Son Mountains are sensitive to climate and environment change and give evidence for Holocene sea-level rise. The outer barrier sands were deposited shortly before or contemporaneous with the local sea-level high stand along the Van Phong Bay postdating the last glacial maximum (LGM). Optically stimulated luminescence (OSL) dating yielded deposition ages ranging from 8.3 ± 0.6 to 6.2 ± 0.3 ka for the stratigraphically oldest exposed barrier sands. Further periods of sand accumulation took place between 2.7 and 2.5 ka and between 0.7 and 0.5 ka. The youngest period of sand mobilisation was dated to 0.2 ± 0.01 ka and is most likely related to reworked sand from mining activities. At the Suoi Tien section in southern central Vietnam, the deposition of the inner barrier sands very likely correlate with an earlier sea-level high stand prior to the last glaciation. OSL age estimates range from 276 ± 17 to 139 ± 15 ka. OSL dating significantly improves our knowledge about the sedimentary dynamics along the coast of Vietnam during the Holocene.     

Re–Os age of non-mineralized black shale from the Kupferschiefer, Poland, and implications for metal enrichment

Six samples of non-mineralized black shale from a Kupferschiefer section in the northern part of the Polish Zechstein Basin (Zdrada IG-8 drill hole: 1026.16–1026.90 m) were studied for Re–Os isotopes and selected major and trace elements. These black shales, averaging 5.82 wt.% C_org and 1.69 wt.% S_tot, display very low base metal values (up to 106 ppb Cu, 792 ppb Pb, and 144 ppb Zn) and have abundances of 64–1376 ppb Re and 0.37–1.25 ppb Os, with a ¹⁸⁷Os/¹⁸⁸Os ratio of 6.95–22.5. The regression of all Re–Os data yields an age of 247 ± 20 Ma, which is within the range of uncertainties of previous Rb–Sr and K–Ar geochronological studies. The scatter in the Re–Os data can be explained in terms of fluctuations in sedimentary conditions, i.e., restricted basin with terrestrial influence.