Chemical and chronologic complexity in the convecting upper mantle: Evidence from the Taitao ophiolite, southern Chile

Exposure of the ca. 6 Ma Taitao ophiolite, Chile, located 50 km south of the Chile Triple Junction, allows detailed chemical and isotopic study of rocks that were recently extracted from the depleted mantle source of mid-ocean ridge basalts (DMM). Ultramafic and mafic rocks are examined for isotopic (Os, Sr, Nd, and O), and major and trace element compositions, including the highly siderophile elements (HSE). Taitao peridotites have compositions indicative of variable extents of partial melting and melt extraction. Low δ¹⁸O values for most whole rock samples suggest some open-system, high-temperature water–rock interaction, most likely during serpentinization, but relict olivine grains have δ¹⁸O values consistent with primary mantle values. Most of the peridotites analyzed for Nd–Sr isotopes have compositions consistent with estimates for the modern DMM, although several samples are characterized by ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd indicative of crustal contamination, most likely via interactions with seawater. The peridotites have initial ¹⁸⁷Os/¹⁸⁸Os ratios that range widely from 0.1168 to 0.1288 (γ_Os = −8.0 to +1.1), averaging 0.1239 (γ_Os = −2.4), which is comparable to the average for modern abyssal peridotites. A negative correlation between the Mg^# of relict olivine grains and Os isotopic compositions of whole rock peridotites suggests that the Os isotopic compositions reflect primary mantle Re/Os fractionation produced by variable extents of partial melting at approximately 1.6 Ga. Recent re-melting at or near the spatially associated Chile Ridge further modified these rocks, and Re, and minor Pt and Pd were subsequently added back into some rocks by late-stage melt–rock or fluid–rock interactions.In contrast to the peridotites, approximately half of the mafic rocks examined have whole rock δ¹⁸O values within the range of mantle compositions, and their Nd and Sr isotopic compositions are all generally within the range of modern DMM. These rocks have initial ¹⁸⁷Os/¹⁸⁸Os ratios, calculated for 6 Ma, that range from 0.126 (γ_Os = −1) to as high as 0.561 (γ_Os = +342). The Os isotopic systematics of each of these rocks may reflect derivation from mixed lithologies that include the peridotites, but may also include pyroxenites with considerably more radiogenic Os than the peridotites. This observation supports the view that suprachondritic Os present in MORB derives from mixed mantle source lithologies, accounting for some of the worldwide dichotomy in ¹⁸⁷Os/¹⁸⁸Os between MORB and abyssal peridotites.The collective results of this study suggest that this >500 km³ block of the mantle underwent at least two stages of melting. The first stage occurred at 1.6 Ga, after which the block remained isolated and unmixed within the DMM. A final stage of melting recently occurred at or near the Chile Ridge, resulting in the production of at least some of the mafic rocks. Convective stirring of this mantle domain during a >1 Ga period was remarkably inefficient, at least with regard to Os isotopes.     

The kinetics of iodide oxidation by the manganese oxide mineral birnessite

The kinetics of iodide (I⁻) and molecular iodine (I₂) oxidation by the manganese oxide mineral birnessite (δ-MnO₂) was investigated over the pH range 4.5-6.25. I⁻ oxidation to iodate proceeded as a two-step reaction through an I₂ intermediate. The rate of the reaction varied with both pH and birnessite concentration, with faster oxidation occurring at lower pH and higher birnessite concentration. The disappearance of I⁻ from solution was first order with respect to I⁻ concentration, pH, and birnessite concentration, such that −d[I⁻]/dt = k[I⁻][H⁺][MnO₂], where k, the third order rate constant, is equal to 1.08 ± 0.06 × 10⁷ M⁻² h⁻¹. The data are consistent with the formation of an inner sphere I⁻ surface complex as the first step of the reaction, and the adsorption of I⁻ exhibited significant pH dependence. Both I₂, and to a lesser extent, sorbed to birnessite. The results indicate that iodine transport in mildly acidic groundwater systems may not be conservative. Because of the higher adsorption of the oxidized I species I₂ and , as well as the biophilic nature of I₂, redox transformations of iodine must be taken into account when predicting I transport in aquifers and watersheds.     

Effect of pressure, temperature, and oxygen fugacity on the metal-silicate partitioning of Te, Se, and S: Implications for earth differentiation

We have measured liquid Fe metal-liquid silicate partitioning (D_i) of tellurium, selenium, and sulfur over a range of pressure, temperature, and oxygen fugacity (1-19 GPa, 2023-2693 K, fO₂ −0.4 to −5.5 log units relative to the iron-wüstite buffer) to better assess the role of metallic melts in fractionating these elements during mantle melting and early Earth evolution. We find that metal-silicate partitioning of all three elements decreases with falling FeO activity in the silicate melt, and that the addition of 5-10 wt% S in the metal phase results in a 3-fold enhancement of both D_Te and D_Se. In general, Te, Se, and S all become more siderophile with increasing pressure, and less siderophile with increasing temperature, in agreement with previous work. In all sulfur-bearing experiments, D_Te is greater than D_Se or D_S, with the latter two being similar over a range of P and T. Parameterized results are used to estimate metal-silicate partitioning at the base of a magma ocean which deepens as accretion progresses, with the equilibration temperature fixed at the peridotite liquidus. We show that during accretion, Te behaves like a highly siderophile element, with expected core/mantle partitioning of >10⁵, in contrast to the observed core/mantle ratio of ∼100. Less extreme differences are observed for Se and S, which yielded core/mantle partitioning 100- to 10 times higher, respectively, than the observed value. Addition of ∼0.5 wt% of a meteorite component (H, EH or EL ordinary chondrite) is sufficient to raise mantle abundances to their current level and erase the original interelement fractionation of metal-silicate equilibrium.     

Early and Middle Pleistocene landscapes of eastern England

This paper reviews the pattern of climate and environmental change in eastern England over the period of the Early and Middle Pleistocene, focussing especially upon northern East Anglia. Particular attention is given to the climate and tectonics that have brought about these changes and the distinctive geology, topography and biology that has developed. Throughout, an attempt is made to describe the new models that have been proposed for the Early and Middle Pleistocene of eastern England, and explain the reasons for these changes. The Early Pleistocene experienced relatively high insulation and relatively low magnitude climatic change and is represented primarily by non-climatically forced processes in the form of tidal current- and wave-activity which formed shallow marine deposits. It is possible to recognise a tectonic control in the distribution of deposits of this age because the surface processes do not have the power to remove this signature. The early Middle Pleistocene was dominated by higher magnitude climatic change involving, occasionally, climatic extremes that ranged from permafrost to mediterranean. The landscape at this time was dominated by the behaviour of major rivers (Thames, Bytham, Ancaster) and extensive coastal activity. In the latter part of the early Middle Pleistocene and the Late Middle Pleistocene the climate experienced major changes which resulted in periods of lowland glaciation and short intervals when the climate was warmer than the present. Details of tectonic activity are difficult to identify because they are removed by powerful surface processes, but it is possible to infer uplift focussed on the major interfluves of central England and subsidence in the North Seas basin. In the areas of glaciation the landscape changed radically from an organised terrain dominated by large rivers and extensive shallow coastal zones to complex, with small valleys, disrupted drainage and often discontinuous river, slope and coastal deposits. Likewise the switching off of the North Sea Delta and the opening of the Strait of Dover, separating Britain from continental Europe can be attributed to the onset of lowland glaciation. The case is made that eastern England was glaciated four times during the Middle Pleistocene: during MIS 16, 12, 10 and 6, and attention is given to recent evidence contradicting this model. Over the period of the Middle Pleistocene there is evidence for high biomass production occurring over short intervals coinciding with the climatic optima of MIS 19, 17, 15, 13, 11, and 7c, 7a and during most of these warmer periods, extending back to c. 750 ka (MIS 19/17), there is evidence in the region for the brief appearance of humans.     

The sediment infill of subglacial meltwater channels on the West Antarctic continental shelf

Subglacial meltwater plays a significant yet poorly understood role in the dynamics of the Antarctic ice sheets. Here we present new swath bathymetry from the western Amundsen Sea Embayment, West Antarctica, showing meltwater channels eroded into acoustic basement. Their morphological characteristics and size are consistent with incision by subglacial meltwater. To understand how and when these channels formed we have investigated the infill of three channels. Diamictons deposited beneath or proximal to an expanded grounded West Antarctic Ice Sheet are present in two of the channels and these are overlain by glaciomarine sediments deposited after deglaciation. The sediment core from the third channel recovered a turbidite sequence also deposited after the last deglaciation. The presence of deformation till at one core site and the absence of typical meltwater deposits (e.g., sorted sands and gravels) in all three cores suggest that channel incision pre-dates overriding by fast flowing grounded ice during the last glacial period. Given the overall scale of the channels and their incision into bedrock, it is likely that the channels formed over multiple glaciations, possibly since the Miocene, and have been reoccupied on several occasions. This also implies that the channels have survived numerous advances and retreats of grounded ice.     

Geochemistry and petrology of selected coal samples from Sumatra, Kalimantan, Sulawesi, and Papua, Indonesia

Indonesia has become the world's largest exporter of thermal coal and is a major supplier to the Asian coal market, particularly as the People's Republic of China is now (2007) and perhaps may remain a net importer of coal. Indonesia has had a long history of coal production, mainly in Sumatra and Kalimantan, but only in the last two decades have government and commercial forces resulted in a remarkable coal boom. A recent assessment of Indonesian coal-bed methane (CBM) potential has motivated active CBM exploration. Most of the coal is Paleogene and Neogene, low to moderate rank and has low ash yield and sulfur (generally < 10 and < 1 wt.%, respectively). Active tectonic and igneous activity has resulted in significant rank increase in some coal basins. Eight coal samples are described that represent the major export and/or resource potential of Sumatra, Kalimantan, Sulawesi, and Papua. Detailed geochemistry, including proximate and ultimate analysis, sulfur forms, and major, minor, and trace element determinations are presented. Organic petrology and vitrinite reflectance data reflect various precursor flora assemblages and rank variations, including sample composites from active igneous and tectonic areas. A comparison of Hazardous Air Pollutants (HAPs) elements abundance with world and US averages show that the Indonesian coals have low combustion pollution potential.     

Modifications of resonant column and torsional shear device for the large strain

Conventional RC/TS (resonant column and torsional shear) devices use a specimen with an aspect ratio (height-to-diameter) of 2:1 and this generates a maximum shear strain in the sample of about 1.5% at the maximum rotation of the driving system. The objective of this study is to modify the RC/TS device to generate higher strain amplitude. The modifications include a new base pedestal to overcome the limitations in the travel of the drive system and modification of the coil wiring to increase torque. The effects of the new coil wire on torque in the electromagnetic drive system were evaluated and the application of the modified device was illustrated using sand soil.