Use of in situ-produced Be in carbonate-rich environments: A first attempt

We have determined the production rate of in situ-produced ¹⁰Be in calcite through measurements of ¹⁰Be and ³⁶Cl concentrations in the same calcite samples and of ¹⁰Be concentrations in depth profiles of flint from the same erosional surface. This yields a ¹⁰Be production rate in calcite of 37.9 ± 6.0 at/g/yr at sea level and high latitude, approximately sixfold higher than production in the coexisting flint. We propose that this higher rate of production may be due to high production cross sections for C spallation by cosmic rays with energies below 50 MeV. These results also open the possibility of dating burial events in carbonate-rich environments by differential radioactive decay of ¹⁰Be and ³⁶Cl.     

Uranyl adsorption onto montmorillonite: Evaluation of binding sites and carbonate complexation

The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO₂²⁺) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10⁻³ M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to [Fe(O,OH)₆] octahedral sites over [Al(O,OH)₆] sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO₂. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO₂.     

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.     

Comparison of the effects of unidirectional and sign‐alternating temperature gradients on the sintering of ice spheres

To simplify the complex snow structures that occur in nature, polycrystalline ice spheres were produced and arranged vertically to model the sintering process. By controlling the temperatures on both the top and bottom of the ice sphere array, the effect of upward and downward vapor transfers was examined. The evolution of the neck areas between ice spheres was observed using X‐ray computed microtomography. As frequently observed under the basal part of a snow layer and previous experiments of snow temperature gradient metamorphism, depth hoar structures were formed along neck areas and their formation was found to be directly related to the vapor transfer direction. To model the temperature gradient inversion that can be induced in nature by daily cycles of radiative heating and cooling, we also performed sign‐alternating temperature gradient experiments on the ice sphere arrays. The morphological evolution of the neck and the associated vapor transfer were examined through image analysis and 2D modeling. The final microstructures of the neck area turned out to be a symmetrical distribution of ice protrusions bridging neighboring ice spheres.     

Dating megafaunal extinction on the Pleistocene Darling Downs,eastern Australia: the promise and pitfalls of dating as a test of extinction hypotheses

A key to understanding Late Pleistocene megafaunal extinction dynamics is knowledge of megafaunal ecological response(s) to long-term environmental perturbations. Strategically, that requires targeting fossil deposits that accumulated during glacial and interglacial intervals both before and after human arrival, with subsequent palaeoecological models underpinned by robust and reliable chronologies. Late Pleistocene vertebrate fossil localities from the Darling Downs, eastern Australia, provide stratigraphically-intact, abundant megafaunal sequences, which allows for testing of anthropogenic versus climate change megafauna extinction hypotheses. Each stratigraphic unit at site QML796, Kings Creek Catchment, was previously shown to have had similar sampling potential, and the basal units contain both small-sized taxa (e.g., land snails, frogs, bandicoots, rodents) and megafauna. Importantly, sequential faunal horizons show stepwise decrease in taxonomic diversity with the loss of some, but not all, megafauna in the geographically-small palaeocatchment. The purpose of this paper is to present the results of our intensive, multidisciplinary dating study of the deposits (>40 dates). Dating by means of accelerator mass spectrometry (AMS) ¹⁴C (targeting bone, freshwater molluscs, and charcoal) and thermal ionisation mass spectrometry U/Th (targeting teeth and freshwater molluscs) do not agree with each other and, in the case of AMS ¹⁴C dating, lack internal consistency. Scanning electron microscopy and rare earth element analyses demonstrate that the dated molluscs are diagenetically altered and contain aragonite cements that incorporated secondary young C, suggesting that such dates should be regarded as minimum ages. AMS ¹⁴C dated charcoals provide ages that occur out of stratigraphic order, and cluster in the upper chronological limits of the technique (～40–48 ka). Again, we suggest that such results should be regarded as suspicious and only minimum ages. Subsequent OSL and U/Th (teeth) dating provide complimentary results and demonstrate that the faunal sequences actually span ～120–83 ka, thus occurring beyond the AMS ¹⁴C dating window. Importantly, the dates suggest that the local decline in biological diversity was initiated ～75,000 years before the colonisation of humans on the continent. Collectively, the data are most parsimoniously consistent with a pre-human climate change model for local habitat change and megafauna extinction, but not with a nearly simultaneous extinction of megafauna as required by the human-induced blitzkrieg extinction hypothesis. This study demonstrates the problems inherent in dating deposits that lie near the chronological limits of the radiocarbon dating technique, and highlights the need to cross-check previously-dated archaeological and megafauna deposits within the timeframe of earliest human colonisation and latest megafaunal survival.     

Water source dynamics of high Arctic river basins

Arctic river basins are amongst the most vulnerable to climate change. However, there is currently limited knowledge of the hydrological processes that govern flow dynamics in Arctic river basins. We address this research gap using natural hydrochemical and isotopic tracers to identify water sources that contributed to runoff in river basins spanning a gradient of glacierization (0–61%) in Svalbard during summer 2010 and 2011. Spatially distinct hydrological processes operating over diurnal, weekly and seasonal timescales were characterized by river hydrochemistry and isotopic composition. Two conceptual water sources (‘meltwater’ and ‘groundwater’) were identified and used as a basis for end‐member mixing analyses to assess seasonal and year‐to‐year variability in water source dynamics. In glacier‐fed rivers, meltwater dominated flows at all sites (typically >80%) with the highest contributions observed at the beginning of each study period in early July when snow cover was most extensive. Rivers in non‐glacierized basins were sourced initially from snowmelt but became increasingly dependent on groundwater inputs (up to 100% of total flow volume) by late summer. These hydrological changes were attributed to the depletion of snowpacks and enhanced soil water storage capacity as the active layer expanded throughout each melt season. These findings provide insight into the processes that underpin water source dynamics in Arctic river systems and potential future changes in Arctic hydrology that might be expected under a changing climate. Copyright © 2013 John Wiley & Sons, Ltd.     

Improved spatial delineation of streambed properties and water fluxes using distributed temperature sensing

A new method was developed for analysing and delineating streambed water fluxes, flow conditions and hydraulic properties using coiled fibre‐optic distributed temperature sensing or closely spaced discrete temperature sensors. This method allows for a thorough treatment of the spatial information embedded in temperature data by creating a matrix visualization of all possible sensor pairs. Application of the method to a 5‐day field dataset reveals the complexity of shallow streambed thermal regimes. To understand how velocity estimates are affected by violations of assumptions of one‐dimensional, saturated, homogeneous flow and to aid in the interpretation of field observations, the method was also applied to temperature data generated by numerical models of common field conditions: horizontal layering, presence of lateral flow and variable streambed saturation. The results show that each condition creates a distinct signature visible in the triangular matrices. The matrices are used to perform a comparison of the behaviour of one‐dimensional analytical heat‐tracing models. The results show that the amplitude ratio‐based method of velocity calculation leads to the most reliable estimates. The minimum sensor spacing required to obtain reliable velocity estimates with discrete sensors is also investigated using field data. The developed method will aid future heat‐tracing studies by providing a technique for visualizing and comparing results from fibre‐optic distributed temperature sensing installations and testing the robustness of analytical heat‐tracing models. Copyright © 2016 John Wiley & Sons, Ltd.