Sedimentological criteria to differentiate submarine channel levee subenvironments: Exhumed examples from the Rosario Fm. (Upper Cretaceous) of Baja California, Mexico, and the Fort Brown Fm. (Permian), Karoo Basin, S. Africa

Two scales of levee confinement are commonly recognised from submarine channel-levee systems on the seafloor and in the subsurface. Large-scale external levees bound the entire system whilst smaller-scale internal levees bound individual thalweg channels within the channel-belt. Although thin beds are commonly identified in core and well logs, their origin, and consequently their stratigraphic significance is currently poorly understood. This knowledge gap stems, in part, from the lack of unambiguously identified outcrop analogues of channel-levees, and in particular the lack of identifiable internal and external levees. Here we report from two exhumed channel-levee systems where both scales of confinement can be recognised: the Rosario Fm. of Baja California, and the Fort Brown Fm. of South Africa. A suite of characteristic sedimentary features are recognised from internal and external levees respectively: internal levees are characterised by structures indicative of complexity in the waxing-waning style of overspill, interactions with topography and flow magnitude variability; in contrast, external levees are characterised by structures indicative of simple surge-like waning flows, relatively uniform flow directions, laterally extensive beds, and a lack of erosive events. Using these observations, together with published literature, we propose a simple nomenclatural scheme for levee sub-environments, and criteria to differentiate between levee sub-environments in core or outcrop.     

The age,extent and geomorphological significance of the Sassafras basalt,south‐eastern New South Wales

Basalt at Sassafras was erupted in the Middle Eocene. The K‐Ar ages average 45.3 ± 4.9 Ma on whole rock and 48.4 ± 1.9 Ma on plagioclase. The basalt is not limited to a plateau capping, but extends 150 m down into adjacent valleys. Comparison with nearby Eocene basalts shows that there was in excess of 250 m of local relief in the central Shoalhaven valley by the Early Tertiary. The basalts were extruded at high elevation, and denudation of the coastal margin of the upland was already well advanced. Post‐basaltic denudation has been very slow, and the Early Tertiary landscape is well preserved.     

Plate tectonics,palaeoenvironments and limestone geomorphology in West-Central Britain

The variety of active, exhumed, and buried limestone landforms of northern England, North Wales, and the Isle of Man arises in part from the way in which Dinantian (Lower Carboniferous) sedimentation was affected by a tilt-block basement structure evolved during the closure of the Iapetus Ocean suture to the north, and partly to subsequent plate tectonic movements associated with the closure of the proto-Tethys ocean, the opening of the Atlantic Ocean and the Alpine orogeny. Landforms created during the Dinantian now form important exhumed and buried landscape features. The Permian half-graben structures of the eastern Irish Sea-Cheshire-Worcester Basins account for many of the contrasts between the upland karsts of the Pennines and the lowland karsts of coastal areas.     

Experimental petrology of alkalic lavas: constraints on cotectics of multiple saturation in natural basic liquids

Experimental study of natural alkalic lava compositions at low pressures (pO₂QFM) reveals that crystallization of primitive lavas often occurs in the sequence olivine, plagioclase, clinopyroxene, nepheline without obvious reaction relation. Pseudoternary liquidus projections of multiply saturated liquids coexisting with plagioclase (±olivine±clinopyroxene±nepheline) have been prepared to facilitate graphical analysis of the evolution of lava compositions during hypabyssal cooling. Use of (TiAl₂)(MgSi₂)_–1 and Fe³⁺ (Al)_–1 exchange components is a key aspect of the projection procedure which is succesful in reducing a wide range of compositions to a systematic graphical representation. These projections, and the experiments on which they are based, show that low pressure fractionation plays a significant role in the petrogenesis of many alkalic lava suites from both continental and oceanic settings. However, the role of polybaric fractionation is more evident in the major element chemistry of these lava suites than in many tholeiitic suites of comparable extent. For example, the lavas of Karisimbi, East Africa, show a range of compositions reflecting a polybaric petrogenesis from primitive picrites at 1360° C/18 kb and leading to advanced low pressure differentiates. Evolved leucite-bearing potassic members of this and other suites may be treated in a nepheline-diopside-kspar (+olivine+leucite) projection. Compositional curvature on the plagioclase+clinopyroxene+olivine+leucite cotectic offers a mechanism to explain resorption of plagioclase in alkalic groundmass assemblages and the incompatibility of albite and leucite. This projection is useful for evaluating the extent of assimilation of the alkalic portions of crustal granulites. Assimilation appears to have played some role in the advanced differentiates from Karisimbi.     

Ordered mixed-layer structures in the Mighei carbonaceous chondrite matrix

High resolution transmission electron microscopy of the Mighei carbonaceous chondrite matrix has revealed the presence of a new mixed layer structure material. This mixed-layer material consists of an ordered arrangement of serpentine-type (S) and brucite-type (B) layers in the sequence … SBBSBB. … Electron diffraction and imaging techniques show that the basal periodicity is ~ 17 Å. Discrete crystals of SBB-type material are typically curved, of small size (<1 μm) and show structural variations similar to the serpentine group minerals. Mixed-layer material also occurs in association with planar serpentine. Characteristics of SBB-type material are not consistent with known terrestrial mixed-layer clay minerals. Evidence for formation by a condensation event or by subsequent alteration of preexisting material is not yet apparent.     

Zoning and layering in diorites of the scottish caledonian appinite suite

Dioritic plugs (< 1 km across) are common associates of the late Caledonian, post-tectonic granites of the Scottish Highlands. These contain a very wide range of rock types from ultramafic through mesocratic diorites to anorthositic and granitic. These rocks form steeply dipping, wall-parallel layers and zones within the plugs. Outer layers are shown to form first, inner layers later. Mafic zones are composed of the minerals seen as phenocrysts in chilled margins and have the chemical characteristics of cumulates. The inner margins of the mafic zones reflect the onset of plagioclase crystallization. Core zones also show inward variations in mineralogy and texture which define vertical, wall-parallel cylinders. These variations are ascribed to fractional crystallization accompanying accretion of rock onto the pipe walls. Cores in different intrusions may be mafic, mesocratic, or leucocratic, which indicates vertical zonation in the bodies. The mafic cores additionally show that recharge with less evolved magma occurred in some cases. The few larger (> 1 km diameter) intrusions show examples of layering and lamination dipping at low to moderate angles. These indicate the beginning of a change from wall-dominated to floor-dominated crystallization as intrusion diameter increases. A comparison is made with the nature and origin of layering in other intrusions.     

Development and Extension of An Aggregated Scale Model: Part 1 – Background to ASMITA

Whilst much attention has been given to models that describe wave, tide and sediment transport processes in sufficient detail to determine the local changes in bed level over a relatively detailed representation of the bathymetry, far less attention has been given to models that consider the problem at a much larger scale (e.g. that of geomorphological elements such as a tidal flat and tidal channel). Such aggregated or lumped models tend not to represent the processes in detail but rather capture the behaviour at the scale of interest. One such model developed using the concept of an equilibrium concentration is the Aggregated Scale Morphological Interaction between Tidal basin and Adjacent coast (ASMITA). In this paper we provide some new insights into the concepts of equilibrium, and horizontal and vertical exchange that are key components of this modelling approach. In a companion paper, we summarise a range of developments that have been undertaken to extend the original model concept, to illustrate the flexibility and power of the conceptual framework. However, adding detail progressively moves the model in the direction of the more detailed process-based models and we give some consideration to the boundary between the two.     

Iron(III) accumulations in inland saline waterways,Hunter Valley,Australia: Mineralogy,micromorphology and pore-water geochemistry

Discharge of Fe(II)-rich groundwaters into surface-waters results in the accumulation of Fe(III)-minerals in salinized sand-bed waterways of the Hunter Valley, Australia. The objective of this study was to characterise the mineralogy, micromorphology and pore-water geochemistry of these Fe(III) accumulations. Pore-waters had a circumneutral pH (6.2–7.2), were sub-oxic to oxic (Eh 59–453 mV), and had dissolved Fe(II) concentrations up to 81.6 mg L⁻¹. X-ray diffraction (XRD) on natural and acid-ammonium-oxalate (AAO) extracted samples indicated a dominance of 2-line ferrihydrite in most samples, with lesser amounts of goethite, lepidocrocite, quartz, and alumino-silicate clays. The majority of Fe in the samples was bound in the AAO extractable fraction (Fe^Ox) relative to the Na-dithionite extractable fraction (Fe^Di), with generally high Fe^Ox:Fe^Di ratios (0.52–0.92). The presence of nano-crystalline 2-line ferrihydrite (Fe₅HO₃·4H₂O) with lesser amounts of goethite (α-FeOOH) was confirmed by scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), and transmission electron microscopy (TEM) coupled with selected area electron diffraction (SAED). In addition, it was found that lepidocrocite (γ-FeOOH), which occurred as nanoparticles as little as ∼5 lattice spacings thick perpendicular to the (0 2 0) lattice plane, was also present in the studied Fe(III) deposits. Overall, the results highlight the complex variability in the crystallinity and particle-size of Fe(III)-minerals which form via oxidation of Fe(II)-rich groundwaters in sand-bed streams. This variability may be attributed to: (1) divergent precipitation conditions influencing the Fe(II) oxidation rate and the associated supply and hydrolysis of the Fe(III) ion, (2) the effect of interfering compounds, and (3) the influence of bacteria, especially Leptothrix ochracea.     

Compositional and thermal convection in magma chambers

Magma chambers cool and crystallize at a rate determined by the heat flux from the chamber. The heat is lost predominantly through the roof, whereas crystallization takes place mainly at the floor. Both processes provide destabilizing buoyancy fluxes which drive highly unsteady, chaotic convection in the magma. Even at the lowest cooling rates the thermal Rayleigh number Ra is found to be extremely large for both mafic and granitic magmas. Since the compositional and thermal buoyancy fluxes are directly related it can be shown that the compositional Rayleigh number Rs (and therefore a total Rayleigh number) is very much greater than Ra. In the case of basaltic melt crystallizing olivine Rs is up to 10⁶ times greater than Ra. However compositional and thermal buoyancy fluxes are roughly equal. Therefore thermal and compositional density gradients contribute equally to convection velocities in the interior of the magma. Effects of thermal buoyancy generated by latent heat release at the floor are included.The latent heat boundary layer at the floor of a basaltic chamber is shown to be of the order of 1 m thick with very low thermal gradients whereas the compositional boundary layer is about 1 cm thick with large compositional gradients. As a consequence, the variation in the degree of supercooling in front of the crystal-liquid interface is dominated by compositional effects. The habit and composition of the growing crystals is also controlled by the nature of the compositional boundary layer. Elongate crystals are predicted to form when the thickness of the compositional boundary layer is small compared with the crystal size (as in laboratory experiments with aqueous solutions). In contrast, equant crystals form when the boundary layer is thicker than the crystals (as in most magma chambers). Instability of the boundary layer in the latter case gives rise to zoning within crystals. Diffusion of compatible trace elements through the boundary layer can also explain an inverse correlation, observed in layered intrusions, between Ni concentration in olivine and the proportion of Ni-bearing phases in the crystallizing assemblage.