Analytical fragility assessment using unscaled ground motion records

It is desirable that nonlinear dynamic analyses for structural fragility assessment are performed using unscaled ground motions. The widespread use of a simple dynamic analysis procedure known as Cloud Analysis, which uses unscaled records and linear regression, has been impeded by its alleged inaccuracies. This paper investigates fragility assessment based on Cloud Analysis by adopting, as the performance variable, a scalar demand to capacity ratio that is equal to unity at the onset of limit state. It is shown that the Cloud Analysis, performed based on a careful choice of records, leads to reasonable and efficient fragility estimates. There are 2 main rules to keep in mind for record selection: to make sure that a good portion of the records leads to a demand to capacity ratio greater than unity and that the dispersion in records' seismic intensity is considerable. An inevitable consequence of implementing these rules is that one often needs to deal with the so‐called collapse cases. To formally consider the collapse cases, a 5‐parameter fragility model is proposed that mixes the simple regression in the logarithmic scale with logistic regression. The joint distribution of fragility parameters can be obtained by adopting a Markov Chain Monte Carlo simulation scheme leading directly to the fragility and its confidence intervals. The resulting fragility curves compare reasonably with those obtained from the Incremental Dynamic Analysis and Multiple Stripe Analysis with (variable) conditional spectrum–compatible suites of records at different intensity levels for 3 older reinforced concrete frames with shear‐, shear‐flexure‐, and flexure‐dominant behavior.     

Iteratively re‐weighted and refined least squares algorithm for robust inversion of geophysical data

A robust metric of data misfit such as the ?₁‐norm is required for geophysical parameter estimation when the data are contaminated by erratic noise. Recently, the iteratively re‐weighted and refined least‐squares algorithm was introduced for efficient solution of geophysical inverse problems in the presence of additive Gaussian noise in the data. We extend the algorithm in two practically important directions to make it applicable to data with non‐Gaussian noise and to make its regularisation parameter tuning more efficient and automatic. The regularisation parameter in iteratively reweighted and refined least‐squares algorithm varies with iteration, allowing the efficient solution of constrained problems. A technique is proposed based on the secant method for root finding to concentrate on finding a solution that satisfies the constraint, either fitting to a target misfit (if a bound on the noise is available) or having a target size (if a bound on the solution is available). This technique leads to an automatic update of the regularisation parameter at each and every iteration. We further propose a simple and efficient scheme that tunes the regularisation parameter without requiring target bounds. This is of great importance for the field data inversion where there is no information about the size of the noise and the solution. Numerical examples from non‐stationary seismic deconvolution and velocity‐stack inversion show that the proposed algorithm is efficient, stable, and robust and outperforms the conventional and state‐of‐the‐art methods.     

Identification of Nutrients Critical Source Areas with SWAT Model under Limited Data Condition

Water Resources - The lack of long term observed data is the main challenge in many simulation-based studies for identification of nutrient critical source areas (CSAs). This study explored the...     

Retraction Note to: Adaptive neuro-fuzzy selection of the optimal parameters of protective spur dike

Natural Hazards - The Editors-in-Chief have retracted this article [1] because validity of the content of this article cannot be verified.     

Mineral chemistry,petrogenesis and evolution of the Ghorveh-Seranjic skarn,Northern Sanandaj Sirjan Zone,Iran

Mineralogy and Petrology - The Ghorveh-Seranjic (GS) skarn is located in the northern part of the Sanandaj-Sirjan zone, NW Iran, which is part of Alpine-Himalaya orogenic belt. The GS metamorphic...     

Increasing the Power Production of Vertical-Axis Wind-Turbine Farms Using Synergistic Clustering

Vertical-axis wind turbines (VAWTs) are being reconsidered as a complementary technology to the more widely used horizontal-axis wind turbines (HAWTs) due to their unique suitability for offshore deployments. In addition, field experiments have confirmed that vertical-axis wind turbines can interact synergistically to enhance the total power production when placed in close proximity. Here, we use an actuator line model in a large-eddy simulation to test novel VAWT farm configurations that exploit these synergistic interactions. We first design clusters with three turbines each that preserve the omni-directionality of vertical-axis wind turbines, and optimize the distance between the clustered turbines. We then configure farms based on clusters, rather than individual turbines. The simulations confirm that vertical-axis wind turbines have a positive influence on each other when packed in well-designed clusters: such configurations increase the power generation of a single turbine by about 10 percent. In addition, the cluster designs allow for closer turbine spacing resulting in about three times the number of turbines for a given land area compared to conventional configurations. Therefore, both the turbine and wind-farm efficiencies are improved, leading to a significant increase in the density of power production per unit land area.     

Modeling the Influence of Groundwater Exploitation on Land Subsidence Susceptibility Using Machine Learning Algorithms

Natural Resources Research - Groundwater over-exploitation in arid and semiarid environments has led to many land subsidence cases. Immense economic losses incurred from land subsidence occurrences...     

An advanced data collection procedure in bivariate drought frequency analysis

In recent years, the bivariate frequency analysis of drought duration and severity using independent drought events and copula functions has been under extensive application. Meanwhile, emphasis on the procedure of independent drought data collection leads to the omission of the actual potential of short-term extreme droughts within a long-term independent drought. However, a long-term individual continuous drought as an Unconnected Drought Runs can be considered as a combination of short-term Connected Drought Runs. Thus, an advanced and new procedure of data collection in the bivariate drought characteristics analysis has been developed in this study. The results indicated a high relative advantage of the new proposed procedure in analysing bivariate drought characteristics (i.e., drought duration and severity frequency analysis). This advantage has been reflected in the more appropriate determination of the best copula and significant reduction in the uncertainty of bivariate drought frequency analysis.     

Utility of coactive neuro-fuzzy inference system for pan evaporation modeling in comparison with multilayer perceptron

Estimation of pan evaporation (E _pan) using black-box models has received a great deal of attention in developing countries where measurements of E _pan are spatially and temporally limited. Multilayer perceptron (MLP) and coactive neuro-fuzzy inference system (CANFIS) models were used to predict daily E _pan for a semi-arid region of Iran. Six MLP and CANFIS models comprising various combinations of daily meteorological parameters were developed. The performances of the models were tested using correlation coefficient (r), root mean square error (RMSE), mean absolute error (MAE) and percentage error of estimate (PE). It was found that the MLP6 model with the Momentum learning algorithm and the Tanh activation function, which requires all input parameters, presented the most accurate E _pan predictions (r?=?0.97, RMSE?=?0.81?mm?day^?1, MAE?=?0.63?mm?day^?1 and PE?=?0.58?%). The results also showed that the most accurate E _pan predictions with a CANFIS model can be achieved with the Takagi–Sugeno–Kang (TSK) fuzzy model and the Gaussian membership function. Overall performances revealed that the MLP method was better suited than CANFIS method for modeling the E _pan process.     

Shift changes and monotonic trends in autocorrelated temperature series over Iran

Temperature data from 29 synoptic stations in Iran for a period of 40?years (1966–2005) were analyzed to test for the existence of monotonic trends and shift changes in the annual, seasonal, and monthly mean air temperature series using the Mann–Kendall and Mann–Whitney tests. The influences of significant lag-1 serial correlation were eliminated from data by the trend-free pre-whitening method prior to the trend analysis. The magnitude of the temperature trends was derived from the Theil–Sen’s slope estimator. It was found that annual mean air temperature increased at 25 out of the 29 stations, of which 17 stations showed significant monotonic trends. The magnitude of the annual mean air temperature trends averagely was (+)0.224°C per decade. Most of the stations with the significant positive monotonic trends had a significant upward shift change. The analysis indicated that the change point year of the significant upward shift changes was 1972 for the whole stations except the coastal ones. Moreover, the strongest monotonic increasing trends and upward shift changes were observed in summer especially in August and September. The spatial analysis of the mean air temperature trends revealed the highest numbers of significant monotonic trends in the big cities of Iran. These findings provide more insights for better understanding of regional temperature behavior in the study area.