Investigation of Failed Slopes Based on a New Method of Back Analysis in Rock Masses: A Case Study

Geotechnical and Geological Engineering - Small variation in shear strength parameters results in remarkable changes in the safety factor (SF) of a rock slope. In this regard, rock mass strength of...     

Cavity effect on Rayleigh wave dispersion and P-wave refraction

Sinkholes and cavities can represent serious hazards to human safety and urban infrastructures,cause roadbed subsidence,and so on.It is therefore essential to evaluate various sinkholes in different depths and sizes to assess the risk of collapse.This paper evaluates the effect of different cavities on Rayleigh-wave propagation and body(P)wave refraction.Rayleigh(R)wave propagation is analyzed according to the classical multi-channel analysis of surface waves(MASW)method also considering the R-wave backscattering.Synthetic seismic traces are computed by means of finite element modeling(FEM)for cavity and intrusion at different depths and sizes.Furthermore,field acquisition data is used to verify the detection effect of a cavity on R-and P-waves.The results show that the presence of backscattered R-waves and the changes in the R-wave velocity spectrum can help in cavity identification.Additional possible evidence is represented by significant changes in the refraction travel times over the cavity location.It can be concluded that the field data are in good agreement with the synthetic,and it could be effective to consider the results of both R-and P-wave analysis in order to efficiently identify the cavities.     

Sedimentary facies and sequence stratigraphy of the Asmari Formation at Chaman-Bolbol, Zagros Basin, Iran

The Oligocene–Miocene Asmari Formation of the Zagros Basin is a thick sequence of shallow water carbonate. In the study area, it is subdivided into 14 microfacies that are distinguished on the basis of their depositional textures, petrographic analysis and fauna. Based on the paleoecology and lithology, four distinct depositional settings can be recognized: tidal flat, lagoon, barrier, and open marine. The Asmari Formation represents sedimentation on a carbonate ramp. In the inner ramp, the most abundant lithofacies are medium grained wackestone–packstone with imperforated foraminifera. The middle ramp is represented by packstone–grainstone to floatstone with a diverse assemblage of larger foraminifera with perforate wall, red algae, bryozoa, and echinoids. The outer ramp is dominated by argillaceous wackestone characterized by planktonic foraminifera and large and flat nummulitidae and lepidocyclinidae. Three third-order depositional sequences are recognized from deepening and shallowing trends in the depositional facies, changes in cycle stacking patterns, and sequence boundary features.     

3D geomechanical modeling and estimating the compaction and subsidence of Fahlian reservoir formation (X-field in SW of Iran)

A geomechanical model can reveal the mechanical behavior of rocks and be used to manage the reservoir programs in a better mode. Fluid pressure will be reduced during hydrocarbon production from a reservoir. This reduction of pressure will increase the effective stress due to overburden sediments and will cause porous media compaction and surface subsidence. In some oil fields, the compacting reservoir can support oil and gas production. However, the phenomena can also cause the loss of wells and reduced production and also cause irreparable damage to the surface structures and affect the surrounding environment. For a detailed study of the geomechanical behavior of a hydrocarbon field, a 3D numerical model to describe the reservoir geomechanical characteristics is essential. During this study, using available data and information, a coupled fluid flow-geomechanic model of Fahlian reservoir formation in X-field in SW of Iran was constructed to estimate the amount of land subsidence. According to the prepared model, in this field, the maximum amount of the vertical stress is 110 MPa and the maximum amount of the horizontal stress is 94 MPa. At last, this model is used for the prediction of reservoir compaction and subsidence of the surface. The maximum value of estimated ground subsidence in the study equals to 29 mm. It is considered that according to the obtained values of horizontal and vertical movement in the wall of different wells, those movements are not problematic for casing and well production and also the surrounding environment.     

Adaptive neuro-fuzzy prediction of the optimum parameters of protective spur dike

This study proposes a new approach for determining the optimum dimensions of a protective spur dike to mitigate the amount of scour around existing spur dikes. Several parameters of a protective spur dike were studied to determine their optimum values, including length, angle, and distance. Also the effect of changes of flow intensity and sediment size were examined. The main objective of this article was to predict the optimum values of protective spur dikes to attain the best performance. To predict the parameters of protective spur dikes for controlling the scour around spur dikes, we used the adaptive neuro-fuzzy inference system method to construct a process that simulates the optimal parameters of a protective spur dike, including the actual length of the protective spur dike, the actual length of the main spur dikes, the distance between the protective spur dike and the first spur dike, the angle between the protective spur dike and the direction of flow, the intensity of the flow, and median size of the bed sediments. This intelligent estimator was implemented using MATLAB/Simulink, and the performances were investigated. The simulation results presented in this paper show the effectiveness of the developed method.     

Computing eddy-current response and current-channeling response of the spheroidal conductor for the separated receiver and transmitter systems

In this article the response of the induced eddy-current in an unlimited conduction spheroidal as well as the response of the current-channeling resulted from the presence of the spheroidal in a weakly conducted medium are derived. The common methods are based on receiving electromagnetic induction response from the homocentric and coaxial receiver and transmitter coils which are exactly over the anomaly. As the spheroidal location is unknown in the practice, it is suggested to measure the electromagnetic induction response in a case that the receiver and the transmitter have an arbitrary situation regarding to the anomaly. In this article, eddy-current response and current-channeling response of the spheroid have been computed in a more general case in which at least one axis of spheroid and the dipole axes of the receiver and transmitter coils are on the same plate; however, none of the coils are laid over the anomaly. Using this method, we can determine the location and the depth of the spheroid through fixing the transmitter’s position and of the receivers’ coil movements.     

Genesis of Tertiary Magnetite–Apatite Deposits,Southeast of Zanjan,Iran

Magnetite–apatite deposits in the Alborz volcano–plutonic belt, southeast Zanjan, in Iran, have blade, lenzoid, and vein forms, which extend in an E‐W direction. There are many magnetite–apatite veins and veinlets in this region, and some of them are economically important, such as Zaker, Morvarid, Sorkheh–Dizaj, and Aliabad. The sizes of the vein orebodies vary between 2 and 16 m in width, 10–100 m in length, and 5–40 m in depth. Microscopic examination of thin sections and polishes indicate that they are composed of magnetite and apatite, with minor amounts of goethite, hematite, actinolite, quartz, muscovite–illite, talc, dolomite, and calcite. The geochemistry and mineralogy of the granitic host rock reveals that it is calc‐alkaline and I‐type. Field observations, mineral paragenesis, the composition of the orebodies, and the composition of the fluid inclusions in the apatite minerals with low salinity (less than 20 wt.% NaCl equivalent) indicate that these magnetite veins were hydrothermally generated at about 200–430°C and are not related to silica–iron oxide immiscibility, as are the major Precambrian magnetite deposits in central Iran.     

Drought characterization using a new copula-based trivariate approach

Meteorological drought is a natural climatic phenomenon that occurs over various time scales and may cause significant economic, environmental and social damages. Three drought characteristics, namely duration, average severity and peak intensity, are important variables in water resources planning and decision making. This study presents a new method for construction of three-dimensional copulas to describe the joint distribution function of meteorological drought characteristics. Using the inference function for margins, the parameters for six types of copulas were tested to select the best-fitted copulas. According to the values of the log-likelihood function, Galambos, Frank and Clayton were the selected copula models to describe the dependence structure for pairs of duration–severity, severity–peak and duration–peak, respectively. Trivariate cumulative probability, conditional probability and drought return period were also investigated based on the derived copula-based joint distributions. The proposed model was evaluated over the observed data of a Qazvin synoptic station, and the results were compared with the empirical probabilities. For measuring the model accuracy, R ², root mean square error (RMSE) and the Nash–Sutcliffe efficiency (NSE) criteria were used. Results indicated that R ², RMSE and NSE were equal to 0.91, 0.098 and 0.668, respectively, which demonstrate sufficient accuracy of the proposed model. Drought probabilistic characteristics can provide useful information for water resource planning and management.     

Designing infill directional drilling in mineral exploration by using particle swarm optimization algorithm

Geostatistical optimization in designing infill boreholes is an important cost-effective approach in increasing the accuracy of the tonnage and grade of an ore deposit. In this research, a new approach is proposed to design the optimum infill directional boreholes. In the proposed approach, the Kriging estimation variance is considered as the objective function and the number and properties of the optimum boreholes are estimated to minimize the objective function. The optimization procedure is implemented by Particle Swarm Optimization (PSO) algorithm. Range of the spatial and directional properties of new boreholes is determined by considering the primary information of the mineralization and administrative constraint of drilling. Then, the PSO algorithm is iteratively applied, and in each iteration, the variation of the estimated Kriging variance after drilling the new boreholes is determined and properties of the new boreholes are updated. The iterative procedure of the algorithm is continued until minimum Kriging variance is satisfied. The approach was applied to the Dalli Cu-Au porphyry deposit in Iran and three new infill directional boreholes were designed by considering six earlier boreholes from the preliminary exploration stage. New optimum boreholes were located where less information from the preliminary exploration stage exists and the highest variance is considered. Two new boreholes are near to vertical (78°) and the third is an inclined with 55° dip. By drilling these three new boreholes, the estimated grade model could be upgraded by 20%. For simplicity, quickness and the ability to search for the required numbers and specifications of a group of directional boreholes in a 3D environment are the most advantages aspects of the proposed approach.