Development of functionalized carrageenan,chitosan and alginate as polymeric chelating ligands for water softening

Chitosan, carrageenan and alginate are among the most abundant biopolymers in nature. They were prepared in uniform beads shape with a diameter of 2 mm ± 10%, using the encapsulator for removal of calcium, magnesium and iron cations from hard water. Solutions of 100–500 mg/L were prepared from each cation, and the detection of cations was carried out using atomic absorption spectrometer. Carrageenan and chitosan were able to chelate the three cations without further modification. However, alginate beads succeeded to chelate iron and magnesium and failed to chelate any calcium ions; in contrast, it increased the initial calcium concentration! That could be due to the pre-cross-linking of alginate beads using calcium chloride solution, which may be leaked back to the solution. However, grafting the alginate beads with polyethyleneimine and bromoacetic acid rectified this problem and the new functional group, –COOH, has been proved using the FT-IR. Optimization of the results in terms of beads weight (0.25–3.0 g) and cations concentrations (100–500 mg/L) has shown that most biopolymeric beads can chelate 85–100% of the cations in concentrations up to 500 mg/L. According to our finding, we came up with the recommendation to use chitosan for chelation of calcium and iron as it showed 100% chelation efficiency of both cations, whereas carrageenan is highly recommended for chelation of iron and magnesium, as it showed 100 and 98% chelation efficiency, respectively. Further work can be done on the reusability of the beads and scale up for the industrial use.     

Distribution and Influence of Iron Phases the Physico—Chemical Properties of Phyllosilicates

Clay minerals from different Cretaceous stratigraphic successions of Egypt were investigated using XRD,DTA,dissolution analysis(DCB),IR,Moessbauer and X-ray Electron Spin Resonance(ESR) spectroscopes.The purity of the samples and the degree of their structural order were determined by XRD.The location of Fe in the octahedral sheet is characterized by absorption bands at-875cm^-1 assigned as Al-OH-Fe which persist after chemical dissolution of free iron.The Moessbauer spectra of these clays show two doublets with isomer shift and quadrupole splitting typical of octahedrally coordinated Fe^3 ,in addition to third doublet with hyperfine parameter typical of Fe^2 in the spectra of Abu-Had kaolinite (H) sample.Six-lines magnetic hyperfine components which are consistent with those of hematite are confirmed in the spectra of both Isel and Rish kaolinite samples.Goethite was confirmed by both IR and DTA.Multiple nature of ESR of these clays suggested structural Fe in distorted octahedral symmetry as well as non-structural Fe.Little dispersion and low swelling indices as well as incomplete activation of the investigated montmorillonite samplas by NaCO3 appear to be due to incomplete disaggregation of montmorillonite particles.This can be explained by the ability of Fe-gel to aggregate the montmorillonite into pseudo-particles and retard the rigid-gel structure.However,extraction of this ferric amorphous compound by dithonite treatment recovers the surface properties of the montmorillonite samples.On the other hand,the amount and site occupation of Fe associated with kaolinite samples show an inverse correlation with the parameters used to describe the degree of crystallinity perfection,color,brightness and vitrification range of these kaolinite samples.     

Environmental impact assessment on water quality deterioration caused by the decreased Ganges outflow and saline water intrusion in south-western Bangladesh

 This paper deals with an environmental impact assessment of low water flow in the river Ganges during a dry period at the Khulna and Mongla port areas in south-western Bangladesh. Large-scale surface water withdrawal in India after commissioning the Farakka Barrage causes a drastic fall in the Ganges low-flow condition within the Bangladesh territory during every dry period. The average lowest discharge in the Ganges is 552 m³/s, which is about 73% less than that in the pre-Farakka time. This has caused the deterioration of both surface and groundwater quality of the study area. Salinity is the principal cause of water quality degradation in the area. Present observation shows that the surface water of the area is sulphate-chloride dominated, which signifies high salinity whereas the groundwater is categorized as of medium to high salinity. To maintain the Rupsa River's maximum salinity below 1000 μS/cm the discharge in the Ganges should be ∼1500 m³/s, whereas that at Garai basin is ∼10 m³/s. If this present situation continues it will be a crippling blow to the environment of the area in the long term. An integrated multidisciplinary approach to hydrogeological research is urgently required to salvage the area from further deterioration. Received: 9 August 1999 · Accepted: 8 March 2000     

Geochemical and geochronological characteristics of the Um Rus granite intrusion and associated gold deposit,Eastern Desert,Egypt

The Um Rus tonalite-granodiorite intrusion(~6 km2)occurs at the eastern end of the Neoproterozoic,ENE-trending Wadi Muba rak shear belt in the Central Eastern Desert of Egypt.Gold-bearing quartz veins hosted by the Um Rus intrusion were mined intermittently,and initially by the ancient Egyptians and until the early 1900 s.The relationship between the gold mineralization,host intrusion,and regional structures has always been unclear.We present new geochemical and geochronological data that help to define the tectonic environment and age of the Um Rus intrusion.In addition,field studies are integrated with EPMA and LA-ICP-MS data for gold-associated sulfides to better understand the formation and distribution of gold mineralization.The bulk-rock geochemical data of fresh host rocks indicate a calc-alkaline,metaluminous to mildly peraluminous,I-type granite signature.Their trace element composition reflects a tectonic setting intermediate between subduction-related and within-plate environments,presumably transitional between syn-and post-collisional stages.The crystallization age of the Um Rus intrusion was determined by in situ SHRIMP 206 Pb/238 U and 207Pb/235U measurements on accessory monazite grains.The resultant monazite U-Pb weighted mean age(643±9 Ma;MSWD 1.8)roughly overlaps existing geochronological data for similar granitic intrusions that are confined to major shear systems and are locally associated with gold mineralization in the Central Eastrn Desert(e.g.,Fawakhir and Hangaliya).This age is also consistent with magmatism recognized as concomitant to transpressional tectonics(D2:~650 Ma)during the evolution of the Wadi Mubark belt.Formation of the gold-bearing quartz veins in NNE-SSW and N-S striking fault segments was likely linked to the change from transpressional to transtensional tectonics and terrane exhumation(D3:620-580 Ma).The development of N-S throughgoing fault arrays and dike swarms(~595 Ma)led to heterogeneous deformation and recrystallization of the mineralized quartz veins.Ore minerals in the auriferous quartz veins include ubiquitous pyrite and arsenopyrite,with less abundant pyrrhotite,chalcopyrite,sphalerite,and galena.Uncommon pentlandite,gersdorffite,and cobaltite inclusions hosted in quartz veins with meladiorite slivers are interpreted as pre-ore sulfide phases.The gold-sulfide paragenesis encompasses an early pyrite-arsenopyrite±loellingite assemblage,a transitional pyrite-arsenopyrite assemblage,and a late pyrrhotite-chalcopyrite-sphalerite±galena assemblage.Free-milling gold/electrum grains(10 sμm-long)are scattered in extensively deformed vein quartz and in and adjacent to sulfide grains.Marcasite,malachite,and nodular goethite are authigenic alteration phases after pyrrhotite,chalcopyrite,and pyrite and arsenopyrite,respectively.A combined ore petrography,EPMA,and LA-ICP-MS study distinguishes morphological and compositional differences in the early and transitional pyrites(PyⅠ,PyⅡ)and arsenopyrite(ApyⅠ,ApyⅡ).Py I forms uncommon small euhedral inclusions in later PyⅡand Apy II.PyⅡforms large subhedral crystals with porous inner zones and massive outer zones,separated by narrow As-rich irregular mantles.The Fe and As contents in PyⅡare variable,and the LA-ICP-MS analysis shows erratic concentrations of Au(<1 to 177 ppm)and other trace elements(e.g.,Ag,Te,and Sb)in the porous inner zones,most likely related to discrete sub-microscopic sulfide inclusions.The outer massive zones have a rather homogenous composition,with consistently lower abundances of base metals and Au(mean 1.28 ppm).The early arsenopyrite(Apy I)forms fine-grained euhedral crystals enriched in Au(mean 17.7 ppm)and many other trace elements(i.e.,Ni,Co,Se,Ag,Sb,Te,Hg,and Bi).On the other hand,ApyⅡoccurs as coarsegrained subhedral crystals with lower and less variable concentrations of Au(mean 4 ppm).Elevated concentrations of Au(max.327 ppm)and other trace elements are measured in fragmented and aggregated pyrite and arsenopyrite grains,whereas the undeformed intact zones of the same grains are poor in all trace elements.The occurrence of gold/electrum as secondary inclusions in deformed pyrite and arsenopyrite crystals indicates that gold introduction was relatively late in the paragenesis.The LAICP-MS results are consistent with gold redistribution by the N-S though-going faults/dikes overprinted the earlier NNW-SSE quartz veins in the southeastern part of the intrusion,where the underground mining is concentrated.Formation of the Um Rus intrusion and gold-bearing quartz veins can be related to the evolution of the Wadi Mubarak shear belt,where the granitic intrusion formed during or just subsequent to D2 and provided dilatation spaces for gold-quartz vein deposition when deformed by D3 structures.     

Generating non-stationary random fields of auto-correlated,normally distributed CPT profile by matrix decomposition method

This paper emphasises the true realisation of Cone Penetration Test (CPT) profiles considering non-stationary nature of the data. Formulation of stationary random field theory has been modified and adapted to non-stationary state in order to take into account the mean and variance variability for soil properties. Multi-variance correlation matrix along with the Cholesky decomposition technique was employed to produce realisations of non-homogenous and non-stationary random fields of CPT profiles. A piecewise and segmental data realisation according to the lithology and site class specifications acquired directly from CPT data is adopted in this study so as to render an accurate data simulation. For validation of proposed method 8 CPT test profiles collected from Urmia Lake site have been introduced and simulated by the stationary and non-stationary algorithms. The mean correlation coefficient between the actual CPT data profiles and related realisations along with some other important statistical parameters and their coefficients of variation strongly demonstrate that non-stationary random field generation technique gives quite better accuracy, by comparison to the conventional stationary random field generation scheme.     

Exploring Real‐Time Geoprocessing in Cloud Computing: Navigation Services Case Study

Today, many real‐time geospatial applications (e.g. navigation and location‐based services) involve data‐ and/or compute‐intensive geoprocessing tasks where performance is of great importance. Cloud computing, a promising platform with a large pool of storage and computing resources, could be a practical solution for hosting vast amounts of data and for real‐time processing. In this article, we explored the feasibility of using Google App Engine (GAE), the cloud computing technology by Google, for a module in navigation services, called Integrated GNSS (iGNSS) QoS prediction. The objective of this module is to predict quality of iGNSS positioning solutions for prospective routes in advance. iGNSS QoS prediction involves the real‐time computation of large Triangulated Irregular Networks (TINs) generated from LiDAR data. We experimented with the Google App Engine (GAE) and stored a large TIN for two geoprocessing operations (proximity and bounding box) required for iGNSS QoS prediction. The experimental results revealed that while cloud computing can potentially be used for development and deployment of data‐ and/or compute‐intensive geospatial applications, current cloud platforms require improvements and special tools for handling real‐time geoprocessing, such as iGNSS QoS prediction, efficiently. The article also provides a set of general guidelines for future development of real‐time geoprocessing in clouds.     

Evaluation of twenty four new Gossypium hirsutum strains for growth, yield, fibre quality and ClCuV resistance under environment of Punjab, Pakistan

Twenty four new strains were tested for their yield, quality and Leaf Curl Virus (ClCuV) resistance. NIAB-111/S, NIAB-98 and NIAB-999 were significantly high fruit bearing varieties at 90 days completing 59.54, 48.26 and 46.00% fruiting respectively. Seed cotton yield of VH-142 was highest with 5417 kgha^?1 and 52 per plant boll bearing, DNH-57 and NIAB-999 remained second and third with 5234 and 5095 kg ha^?1 seed cotton yield, respectively. BH-160 and CRIS-467 were found to be second and third highest boll bearing varieties with 50.97 and 40.20 per plant average bolls respectively. Plant height in CRIS-467, MNH-642 and SLH-224 was significantly higher in comparison to other varieties.NIAB-98, CIM-499 and CIM-506 were found short stature varieties in comparison with other but out of these NIAB-98 and CIM-506 were in high yielding position and CIM-499 was found medium yielder variety. GOT% of MNH-642 remained highest having value of 45.00%. While GOT%. of NIBGE-1, CRIS-168 and CRIS-467 was at lowest position with 35.73, 35.89 and 36.62% respectively. NIAB-111, CIM-499 and BH-160 were at first position in terms of fibre fineness with micronaire values 3.98, 4.00 and 4.07 ìg/inch having fibre length 28.53, 31.38 and 30.23 mm respectively. Out of 26 varieties, 16 varieties resulted maturity index in the range of 85.03% and 90.30% with highest maturity index in case of NIBGE-1 (i.e. 90.30%) followed by NIAB-999 and MNH-642 with 89.55 and 85.5% respectively.CRIS-168, CRIS-468 and CRIS-467 were found viral susceptible.     

The relationship among environmental variables,jellyfish and non‐gelatinous zooplankton: A case study in the north of the Gulf of Oman

Processes underlying the temporal and spatial variations observed in the distribution of jellyfish and non‐gelatinous zooplankton in the Gulf of Oman are not well understood. This information gap is clearly a major issue in controlling the harmful blooms of jellyfish and non‐gelatinous zooplankton. Samples of jellyfish and non‐gelatinous zooplankton were collected from six stations in Chabahar Bay and three stations in Pozm Bay within four seasons. At each station, environmental variables were also recorded from bottom and surface water. A total of 83 individuals of medusae representing four species of Scyphozoa (i.e., Cyanea nozakii, Chrysaora sp., Pelagia noctiluca, Catostylus tagi) and species of Hydrozoa (i.e., Diphyes sp., Rhacostoma sp., Aequorea spp.) were observed in the study area. A total of 70,727.25 individuals/m^?3 of non‐gelatinous zooplankton dominated by copepods and cladocerans were collected in nine stations within the four seasons. The results of a RELATE analysis yielded no significant association between species composition for jellyfish and non‐gelatinous zooplankton. Among environmental variables, water transparency, nitrite concentration, water depth and temperature were better associated with the total variation in jellyfish species composition than with that of non‐gelatinous zooplankton. Dissolved oxygen, pH, and phosphate concentration were significant environmental variables associated with the variation in the spatial and temporal distribution patterns of non‐gelatinous zooplankton assemblages. Although some jellyfish species (i.e., Rhacostoma sp., Pelagia noctiluca, Catostylus tagi) occur independently of non‐gelatinous zooplankton assemblages, other jellyfish (i.e., Chrysaora sp., Aequorea spp., Cyanea nozakii, Diphyes sp.) are strongly correlated with non‐gelatinous zooplankton assemblages.     

Three-parameter Radon transform in layered transversely isotropic media

Radon transform is a powerful tool with many applications in different stages of seismic data processing, because of its capability to focus seismic events in the transform domain. Three-parameter Radon transform can optimally focus and separate different seismic events, if its basis functions accurately match the events. In anisotropic media, the conventional hyperbolic or shifted hyperbolic basis functions lose their accuracy and cannot preserve data fidelity, especially at large offsets. To address this issue, we propose an accurate traveltime approximation for transversely isotropic media with vertical symmetry axis, and derive two versions of Radon basis functions, time-variant and time-invariant. A time-variant basis function can be used in time domain Radon transform algorithms while a time-invariant version can be used in, generally more efficient, frequency domain algorithms. Comparing the time-variant and time-invariant Radon transform by the proposed basis functions, the time-invariant version can better focus different seismic events; it is also more accurate, especially in presence of vertical heterogeneity. However, the proposed time-invariant basis functions are suitable for a specific type of layered anisotropic media, known as factorized media. We test the proposed methods and illustrate successful applications of them for trace interpolation and coherent noise attenuation.     

Textural attributes, mineralogy and provenance of sand dune fields in the greater Al Ain area, United Arab Emirates

Sand dunes and interdune sediments around Al Ain city have markedly high carbonate contents which increase towards Jabal Hafit mountain and the Arabian Gulf coast. The dunes are composed predominantly of well-sorted fine sands, consisting of unstrained quartz and carbonate grains together with minor proportions of chert and feldspars. Scanning electron microscope (SEM) examination reveals that quartz grains display various mechanically- and chemically-formed surface textures. The heavy minerals are dominated by opaques and pyroxenes with minor tourmaline, garnet, rutile, epidote, monazite, zircon, hornblende and staurolite.Interdune sediments consist of fine and very fine, poorly- to extremely poorly-sorted sands together with small concentrations of gravel, silt and clay. The light sand fractions compositionally resemble those of dunes but contain, in addition, gypsum, anhydrite, halite and celestite. Percentages of pyroxenes are higher whereas those of zircon, tourmaline and rutile are lower than in dunes. X-ray diffractometry reveals that the clay fractions consist solely of palygorskite. Generally, interdune sediments are much less mature texturally and mineralogically than dune sands; the maturity of both types of sediments decreases toward the NE of the study area.Sand dunes in the various districts of the greater Al Ain area are genetically related. Also, there is a partial genetic relationship between the dunes and interdune sediments; both are mainly multicyclic. Their major parts were brought mainly by the dominant north-west (El Shamal) winds from older dune fields in other localities in U.A.E., Qatar and El-Rub El-Khali. Local contributions to the dune fields from Jabal Hafit mountain, the Oman Mountains and the calcareous coast of the Arabian Gulf were, in cases, significant. Also, authigenesis by groundwater under highly evaporitic conditions played a major role in the formation of interdune sediments through the genesis of the clay and some nonclay minerals.