Behaviour of Track Ballast Under Repeated Loading

Najaf-sea quarry is located in Najaf city about 160 km south west of Baghdad the capital of Iraq. It is the main source that supplies track ballast for maintenance of existing railway network and construction of new railway lines in the middle and southern parts of Iraq. Track ballast experience a complex combination of stresses during its service lifetime, primarily from repeated axial loads of the trains in addition to stresses generated from the environmental conditions. The ideal evaluation of suitability of track ballast must be carried out under real field loading conditions, however such field tests are usually costly and time consuming. On the other hand laboratory model tests simulating field loads under limited boundary conditions can provide satisfactory indication about the suitability of the material. The present paper investigates the deformation characteristics of Najaf-sea track ballast, under repeated loading using model tests simulating ballast conditions under a selected track section. A test setup was designed and manufactured capable of applying both monotonic as well as repeated loading on the track section under different conditions. The repeated model tests which simulate as close as possible the field conditions shed the light on the generated settlement, modulus of deformation and degradation of the ballast particles under different repeated loading levels. Statistical analysis in terms of breakage index and repeated applied load revealed satisfactory correlations that help in understanding the overall performance of the ballast material. The results also demonstrate that 4–5 tamping are capable of controlling both the settlement and modulus of deformation of the ballast material.     

Discrimination of Different Erosion Levels of Porphyry Cu Deposits using ASTER Image Processing in Eastern Iran: a Case Study in the Maherabad, Shadan, and Chah Shaljami Areas

The Lut block, eastern Iran, is one of the most extensive Cenozoic magmatic rocks, that show suitable targets for porphyry Cu-Au and high-sulfidation epithermal Au related to porphyry Cu-Au mineralization. In this study, Advanced Spaceborne Thermal Emission and Reflection Radiometer （ASTER） was used to identify different erosion levels of three porphyry Cu deposits, including Maherabad, Shadan, and Chah Shaljami, located in the Lut block volcanic-plutonic belt. Alteration minerals, including kaolinite, dickite, alunite, jarosite, epidote, chlorite, montmorillonite, muscovite, biotite, orthoclase, gypsum, and quartz, are selected to map different alteration zones and erosion levels. Distributions of end-members are mapped by using the SAM and MTMF in VNIR and SWIR of ASTER bands and the results are evaluated against the field studies. For some end-members, the results of SAM processing are more reliable compared to the MTMF because the latter looses field spectra. The use of angle threshold in the SAM, and MF-score and infeasibility value in the MTMF or low abundance of some end-members, and finally comparison of output images of spectral processing show good correlation with alteration maps. Differentiation and explanation of various erosion levels of porphyry Cu deposits are done successfully by using the ASTER sensor data.     

Uptake of Indosol Dark-blue GL dye from aqueous solution by water hyacinth roots powder: adsorption and desorption study

Adsorption characteristics of water hyacinth roots powder for the removal of Indosol Dark-blue GL dye were investigated in batch mode. Operating variables, such as initial solution pH, presence of detergent, adsorbent dosage, initial concentration and contact time, were studied. The results showed that the adsorption of dye increased with increasing the initial concentration and contact time. The adsorption is highly pH dependent and adsorption capacity increased with decrease in pH. Kinetic study revealed that the uptake of Indosol Dark-blue GL was very rapid within the first 15 min and equilibrium time was independent of initial concentration. Batch equilibrium experiments were carried out at different pH and found that equilibrium data fitted well to Langmuir isotherm model. The maximum sorption capacity of the adsorbent was found as 86 mg g^?1 at pH 3 which reduced to 64 mg g^?1 at pH 5. The presence of detergent reduced the sorption capacity of the adsorbent significantly. Using equilibrium and kinetic data, the forward and backward rate constants were determined from the unified approach model. Desorption study revealed that the dye can be recovered by swing the pH from low to high.     

Mapping hotspots of underground water quality based on the variation of chemical concentration in Amman,Zarqa and Balqa regions,Jordan

This study uses geographic information systems to map the hotspots level changes in underground water quality based on pH, nitrate and conductivity in Amman, Zarqa and Balqa regions, Jordan using data from 57 wells. The chemical concentration for each parameter was obtained from the Water Authority of Jordan. The data were tested according to ISO/IEC 17025 standards by the Jordan Inorganic Laboratory of the Laboratories and Quality Department of Water Authority for 2004 and 2010 and were processed using Getis-Ord Gi statistics. The study indicated that there are periodic fluctuations for the values of selected chemical elements of groundwater that are localized, creating contamination hotspots within the study regions. The pH, nitrate and conductivity all indicated specific hotspots of higher than average values in 2004 and 2010 in the Zarqa region. The evidence indicates that there are two major localized areas of high value for all parameters centered in the western Zarqa region, an area dominated by urban infrastructure and irrigated lands. These findings have implications for the management of aquifer water quality through the identification of high-value hotspots. Because the aquifers in the regions are connected, understanding the hotspots with high pH, nitrate and conductivity values may enable improvements in the water quality across the aquifer systems in the regions.     

Simulation of the lately injected dykes in an Iranian porphyry copper deposit using the plurigaussian model

Ore deposits are usually composed of rock units or facies with different grade distributions and complex spatial structures. Being able to simulate the spatial layout of these facies are essential to have a comprehensive mining plan and an accurate resources and reserves evaluation. Modelers are faced with a set of challenges when creating the facies model such as: reproducing the facies proportions and spatial continuity as well as the topological contacts between facies, capturing post depositional overprinting, and honoring the data obtained from drill holes. Plurigaussian simulation (PGS) is a geostatistical approach that allows covering these challenges. This study addresses the application of PGS to Sungun porphyry copper deposit (Iran), in order to simulate the layout of three facies: mineralized porphyry and skarn and non-mineralized dykes. The aim of this study is to construct numerical models in which the dyke structures reflect the evolution observed in the geology.     

Monitoring rangeland ground cover vegetation using multitemporal MODIS data

The aim of the present research is to monitor changes in herbage production during the grazing season in the Semirom and Brojen regions, Iran, using multitemporal Moderate Resolution Imaging Spectroradiometer (MODIS) data. At first, various preprocessing steps were applied to a topography map. The atmospheric and topographic corrections were applied using subtraction of the dark object method and the Lambert method. Image processing, including false-color composite, principal component analysis, and vegetation indices were employed to produce land use and pasture production maps. Vegetation sampling was carried out over a period of 4 months during June–September 2008, using a stratified random sampling method. Twenty random sampling points were selected, and herbage production was estimated and verified with the double-checking method. Four MODIS data sets were used in this study. The models for image processing and integrating ground data with satellite images were processed, and the resulting images were categorized into seven classes. Finally, the land covers were verified for accuracy. A postclassification analysis was carried out to verify the seven class change detections. The results confirmed that Normalized Difference Vegetation Index (NDVI) and Soil-Adjusted Vegetation Index (SAVI) maps had a close relationship with the field data. The indices produced with shortwave infrared bands had a close relationship with field data where the ground cover and yields were high. The R ² value observed was 0.85. The changes in the pasture vegetation were high during the growing season in more than 90 % of the pastures. During the growing season, most changes in the pastures belonged to class 5 and 2 in the NDVI and SAVI index maps, respectively.     

Drought risk assessment using remote sensing and GIS techniques

Beginning with a discussion of drought definitions, this review paper attempts to provide a review of fundamental concepts of drought, classification of droughts, drought indices, and the role of remote sensing and geographic information systems for drought evaluation. Owing to the rise in water demand and looming climate change, recent years have witnessed much focus on global drought scenarios. As a natural hazard, drought is best characterized by multiple climatological and hydrological parameters. An understanding of the relationships between these two sets of parameters is necessary to develop measures for mitigating the impacts of droughts. Droughts are recognized as an environmental disaster and have attracted the attention of environmentalists, ecologists, hydrologists, meteorologists, geologists, and agricultural scientists. Temperatures; high winds; low relative humidity; and timing and characteristics of rains, including distribution of rainy days during crop growing seasons, intensity, and duration of rain, and onset and termination, play a significant role in the occurrence of droughts. In contrast to aridity, which is a permanent feature of climate and is restricted to low rainfall areas, a drought is a temporary aberration. Often, there is confusion between a heat wave and a drought, and the distinction is emphasized between heat wave and drought, noting that a typical time scale associated with a heat wave is on the order of a week, while a drought may persist for months or even years. The combination of a heat wave and a drought has dire socio-economic consequences. Drought risk is a product of a region’s exposure to the natural hazard and its vulnerability to extended periods of water shortage. If nations and regions are to make progress in reducing the serious consequences of drought, they must improve their understanding of the hazard and the factors that influence vulnerability. It is critical for drought-prone regions to better understand their drought climatology (i.e., the probability of drought at different levels of intensity and duration) and establish comprehensive and integrated drought information system that incorporates climate, soil, and water supply factors such as precipitation, temperature, soil moisture, snow pack, reservoir and lake levels, ground water levels, and stream flow. All drought-prone nations should develop national drought policies and preparedness plans that place emphasis on risk management rather than following the traditional approach of crisis management, where the emphasis is on reactive, emergency response measures. Crisis management decreases self-reliance and increases dependence on government and donors.     

Phytoplankton and bacterial community structures and their interaction during red-tide phenomena

Phytoplankton and bacteria diversity were studied before, during and after red tide phenomena during spring season 2015 in the Eastern Harbour (E.H.) of Alexandria, Egypt. Fifty five species of phytoplankton were identified and represented different distinct classes “Bacillariophyceae; Dinophyceae, Chlorophyceae, Cyanophyceae and Eugelenophyceae”. Also, Diatom formed the most dominant group. The average number of the phytoplankton density varied from 4.8 × 10⁴ to 1.1 × 10⁶ cell l^-1 during the study period and Skeletonema costatum was the agent causing the red tide. The existence percentages of bacteria ranged from 2.6 to 17.9% on all media tested. The bacterial isolates on the nutrient agar medium represented the highest existence with a total percentage of 43.6%, followed by MSA medium (25.7%), while the lowest percentage was for the AA medium at 7.8%. However, twelve isolates were selected as representative for bacterial community during study interval. Based on the morphological, biochemical, physiological and enzymatic characteristics, the bacterial strains were described. Depending on the 16S rDNA gene sequence, three common antagonists were aligned as: Vibrio toranzoniae strain Vb 10.8, Ruegeria pelagia strain NBRC 102038 and Psychrobacter adeliensis strain DSM 15333. The interaction between these bacteria and S. costatum was studied. The growth of S. costatum was significantly lower whenever each bacterium was present as compared to axenic culture. More specifically, 30% (v/v) of the all tested bacteria showed the strongest algicidal activities, as all S. costatum cells were killed after two days. 10% of R. pelagia and P. adeliensis also showed significant algicidal activities within six days.     

Occurrence of uraniferous iron and manganese oxides in biotite granite North East Gabal El Sela area, South Eastern Desert, Egypt

Optical microscopy, X-ray diffraction (XRD), and back-scattered electron imaging (BSE) have been used to determine the mineralogical composition of the uraniferous iron and manganese oxides and the associated U-minerals hosted in biotite granite that occurred north east Gabal El Sela area south Eastern Desert, Egypt. These mineralizations were found as veinlets fractures filling associated with strongly kaolinitic alteration of the coarse-grained biotite granite. XRD determined that the geothite mineral form the main constituent of uraniferous iron oxide in addition to tapiolite, and kaolinite minerals, where as uraniferous manganese oxide composed of pyrolusite, ramsdellite, and cryptomelane. BSE confirmed that the associated uranium minerals represented by uranothorite, kazolite, and zentime in addition to columbite-bearing minerals. Uranothorite and columbite-bearing minerals are the most abundant minerals in this mineralization. Petrographically, biotite granite is composed mainly of quartz, in addition to K-feldspars, biotite and muscovite with minor zircon, garnet, apatite, uranium-rich thorite and iron oxide. Petrochemical studies and tectonic discrimination diagrams for this granite reveal that they are classified as granite to alkali feldspar granite, originated from calc-alkaline magma having peraluminous nature and developed in within-plate tectonic environment. Field radiometric measurements revealed the localization of two high radiometric anomalies associated with iron and manganese oxides, within this anomaly uranium content range from 65 to 85 ppm. Alpha Track-etch Detectors of radon gas registrations revealed high track density reach up to 15,448.7 Bq/m³.     

Steel rings as seismic fuses for enhancing ductility of cross braced frames

A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames. The suggested system consists of one or two concentric steel rings installed in the cross-braced bay vertically. The steel rings are designed such that they fail in bending sooner than failure of the braces in compression.Then the rings act as seismic fuses with multiple bending plastic hinges. Using nonlinear static analysis, it is shown that the proposed sys...