Optimization of Baffled Rectangular and Prismatic Storage Tank Against the Sloshing Phenomenon

China Ocean Engineering - The fluid motion in partially filled tanks with internal baffles has wide engineering applications. The installation of baffles is expected to reduce the effect of...     

Diatomaceous deposits of Fayium, Egypt; characterization and evaluation for industrial application

The Holocene lacustrine diatomaceous earth of Fayium,South West of Cairo,has been studied to define its minerals,chemistry,petrography and physical properties.Minerals were processed by way of calcination at 550℃ ,followed by acid leaching to reduce levels of mineral impurities.The diatomite is of biogenic opal A.with calcite as the main ganue mineral,quartz and clay minerals(smectite followed by kaolinite in abundance and a trace amount of illite).Silica in the diatomaceous earth accounts for about 63% on average.Positive correlation between CaO and CO2 indicates that Ca is present mainly as calcite.Al2O3,Fe2O3,MgO and K2O are attributed mainly to clay minerals.However,the physical properties of the diatomaceous earth as filter-aids and filler for paints and plastics are poor because of general high levels of impurities.The technological performances of the diatomaceous earth have been significantly improved owing to upgrading of diatoms through mineral processing trical.     

Isoparametric Boundary Element Method Applied to the Rectangular and Delta Hydrofoils near the Free Surface

In this paper, the hydrodynamic characteristics and flow field around rectangular and delta hydrofoils, moving with a constant speed beneath the free surface are numerically studied by means of isoparametric boundary element method (IBEM). The quantities (source and dipole strengths) and the geometry of the elements are represented by a linear distribution. Two types of three-dimensional hydrofoils (rectangular and delta) are selected with NACA4412 and symmetric Joukowski sections. Some numerical results of pressure distribution, lift, wave-making drag coefficients and velocity field around the hydrofoils are presented. Also, the wave pattern due to moving hydrofoil is predicted at different operational conditions. Comparisons are made between computational results obtained through this method and those from the experimental measurements and other numerical results which reveal good agreement.     

Modelling of sand transport under wave-generated sheet flows with a RANS diffusion model

A 1DV-RANS diffusion model is used to study sand transport processes in oscillatory flat-bed/sheet flow conditions. The central aim is the verification of the model with laboratory data and to identify processes controlling the magnitude and direction (‘onshore’/‘offshore’) of the net time-averaged sand transport. The model is verified with a large series of measured net sand transport rates, as collected in different wave tunnels for a range of wave-current conditions and grain sizes. Although not all sheet flow details are represented in the 1DV-model, it is shown that the model is able to give a correct representation of the observed trends in the data with respect to the influence of the velocity, wave period and grain diameter. Also detailed mean sediment flux profiles in the sheet flow layer are well reproduced by the model, including the direction change from ‘onshore’ to ‘offshore’ due to a difference in grain size from 0.34 mm (medium sand) to 0.13 mm (fine sand). A model sensitivity study with a selected series of net transport data shows that the stirring height of the suspended sediment ε_s/w_s strongly controls the magnitude and direction of the net sediment transport. Inclusion of both hindered settling and density stratification appears to be necessary to correctly represent the sand fluxes for waves alone and for waves + a superimposed current. The best agreement with a large dataset of net transport measurements is obtained with the 1DV-RANS model in its original settings using a Prandtl–Schmidt number σ_ρ = 0.5.     

Evaluation of thermal comfort conditions in Ourmieh Lake, Iran

Research in developing countries concerning the relationship of weather and climate conditions with tourism shows a high importance not only because of financial aspects but also an important part of the region’s tourism resource base. Monthly mean air temperature, relative humidity, precipitation, vapor pressure, wind velocity, and cloud cover for the period 1985–2005 data collected from four meteorological stations Tabriz, Maragheh, Orumieh, and Khoy were selected. The purpose of this study is to determine the most suitable months for human thermal comfort in Ourmieh Lake, a salt sea in the northwest of Iran. To achieve this, the cooling power and physiologically equivalent temperature (PET) calculated by the RayMan model and the Climate Tourism/Transfer Information Scheme (CTIS) were used. The results based on cooling power indicate that the most favorable period for tourism, sporting, and recreational activities in Ourmieh Lake is between June and October and based on PET between June to September. In addition, the CTIS shows a detailed quantification of the relevant climate–tourism factors.     

Petrology of calc-alkaline/adakitic basement hosting A-type Neoproterozoic granites of the Malani igneous suite in Nagar Parkar,SE Sindh,Pakistan

The Nagar Parkar area contains three distinct groups of rocks, from oldest to youngest, (1) basement rocks ranging in composition from mafic to (quartz)diorite, tonalite, granite, and younger granodiorite, (2) granite plutons similar in general features to those of the Malani Igneous Suite of Rajasthan, and (3) abundant mafic, felsic and rhyolitic dykes. The basement rocks show strong brittle and local plastic deformation, and epidote amphibolite/upper greenschist facies metamorphic overprint. The chemistry of the basement rocks contrasts the commonly agreed within plate A-type character of the Neoproterozoic granites (group 2) that are emplaced into them. The basement rock association is calc-alkaline; the granodiorite displays the compositional characteristics of adakites, whereas the tonalite has intermediate composition between typical adakite and classical island arc rocks. This paper presents detailed petrography of the basement rocks and compares their geochemistry with those of the group 2 granites as well as with rocks from other tectonic environments. It is proposed that the Nagar Parkar basement is part of a 900–840 Ma magmatic arc that was deformed before it was intruded 800–700 Ma ago by the A-type continental granitic rocks followed by mafic to felsic dykes.     

Health risk assessment of trace elements in drinking water from Najran City,southwestern Saudi Arabia

The concentrations of 16 trace elements (Ag, Al, As, B, Ba, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Se, Ti, U, and Zn) in drinking water from Najran City, Saudi Arabia, were determined by inductively coupled plasma-mass spectrometry (ICP-MS) and compared with local, regional, and international guidelines. Water samples from 22 water treatment plants and 13 commercial bottled water brands were analyzed. Except for B and U, the trace element concentrations were below the permitted limits defined in SASO, GSO, and WHO drinking water quality guidelines. The B concentrations in three brands of bottled water were 533.19, 602.29, and 1471.96 μg/L, which were all higher than the GSO and SASO limit (500 μg/L). The U concentrations were higher than the SASO limits for drinking water in two samples; one in treatment plant (2.39 μg/L) and another in foreign bottled water (2.17 μg/L). The median As, Ba, Cu, Ni, U, and Zn concentrations were statistically significantly higher in the treatment plant water samples than those in the bottled water samples, and conversely, the B concentrations were higher in the bottled water samples. The Cd, Hg, and Ti concentrations were below the detection limits of ICP-MS in all of the water samples. Apart from few exceptions, trace element concentrations in drinking water of Najran City were all within limits permitted in the national, regional, and international drinking water quality guideline values.     

Geochemistry and zircon U-Pb geochronology of Miocene plutons in the Urumieh-Dokhtar magmatic arc,east Tafresh,Central Iran

ABSTRACT

The Tafresh plutons that include Ahmadabab diorite, Vasfonjerd monzonite, Mehrezamin diorite and Chahak diorite, located to the east of Tafresh city, north-central Iran, are part of Urumieh-Dokhtar magmatic arc. U-Pb dating of zircon grains provides emplacement ages of 22.3 ± 1 Ma for the Ahmadabad diorite, and tightly clustered ages of 22.2 ± 0.2 Ma, 21.3 ± 0.2 Ma, and 21.7 ± 0.4 Ma for Vasfonjerd monzodiorite, Mehrezamin diorite-monzonite, and Chahak diorite-monzonite plutons, respectively. These rocks are metaluminous to weakly peraluminous, calc-alkaline, and characterized by enrichment in light rare earth elements, Nb-Ta negative anomalies, and high LILE/HFSE ratios. Tafresh plutonic rocks originated from a parental magma source and experienced different degrees of partial melting. Geochemical signatures of Tafresh plutonic rocks, such as a wide range of Y/Nb (2.7–8.4) and low Zr/Nb (19.5–35.) ratios, Nb/Ta (11.46–18.15), argue for mantle–crust interaction during generation of Tafresh magmas. Relatively low Nb/La ratios further indicate that the lithospheric mantle played a significant role in melt generation. HREE signatures (i.e. decrease Dy/Yb with increasing SiO₂) preclude substantial involvement of garnet either in the residue, both during partial melting and fractionation of the magma. The plutons are a product of final stages of subduction-related magmatism prior to the collision between the Arabian and Eurasian tectonic plates.     

Mineral chemistry and Ti in zircon thermometry: Insights into magmatic evolution of the Sangan igneous rocks,NE Iran

The Sangan Magmatic complex (SMC) is, a large I-type magmatic complex, located in the northeastern Iran. Zircons extracted from the intrusive and volcanic rocks within the SMC record a similar Hf compositions and REE patterns, indicating that these chemical signatures have likely been inherited from the same source and simple history of magmatic crystallization during the evolution of the orogeny. The zircon from volcanic rocks yield Ti-in-zircon crystallization temperatures of 667–1145?°C with average temperatures of 934?°C while those from granitoids indicate crystallization temperatures of 614–898?°C with an average of 812?°C. Ti-in-zircon, Ti in biotite thermometries also indicates that the crystallization temperatures of volcanic rocks are relatively higher than those of granitoids. The biotite chemistry studies reveal that this mineral crystallized at approximately 725°–800?°C and 758° to 816?°C for granitoid and volcanic rocks, respectively, which is similar to obtained temperatures by Zir-saturation of Eq. (1). T_zicsat and T_magma trend lines on the T-SiO₂ diagram cross at high silica contents of ～68?wt.%, at which temperature the magma becomes zircon-saturated and new zircons are crystallized. The zircon REE data including Ce/Ce*, Eu/Eu*, and Th/U ratios suggest that SMC igneous rocks are formed from oxidized magma. However, the zircon Th/U and Hf data suggest that the SMC became progressively more oxidized and also indicate lower temperatures from volcanic and plutonic rock with decreasing time.