Characteristics of mining tremors within the near-wave field zone

Mining in the Upper Silesian Coal Basin, Poland, induces tremors with magnitudes ranging up to 4.3. The recordings of mining tremors from the near-wave fiel and the far-wave field show different characteristics of ground motion.Knowledge of these characrteristics, has an enormous practical importance when solving the problems of resistance of underground workings against seismic impacts. The near-wave field is characterized by a domination of the high frequency components of motion, and the seismograms often are a single pulse Geomechanical interpretation of them leads to the conclusion that this pulse corresponds to a single exciting force. This fact is also reflected in the rockbursts: the potentially damaging ground motion which is restricted to the seismic source region.The seismometric data have shown that the peak particle velocities from a hypocentral distance of 200–300 m, resulted in more than 3 cm/s. The peak ground velocities appear to be dependent on stress drop , and peak particle velocities reaching 5 m/s may occur. The computational example proves that in a thick coal seam the pulse with the stress =1.8 MPa from the tremor at the short source distance can generate the rockburst.     

Modeling sea dike breaching induced by breaking wave impact-laboratory experiments and computational model

Sea dikes are of crucial importance for the defense systems of low-lying coastal areas in countries such as Germany, The Netherlands, Denmark, etc. As sea dike breaching induced by storm surges is regarded as one of the main causes of coastal flood disasters, reliable predictions of both the breach initiation, formation and breach development is urgently needed. Although a simple preliminary model for the simulation of sea dike breaching initiated from the seaside was developed (Stanczak et al., 2006), its limitations showed the necessity for further research and for the development of a more detailed model. This paper therefore provides a summary of the results of laboratory experiments on the erosion of grass and clay revetment of a sea dike induced by breaking wave impact and describes the new detailed computational model, including an uncertainty analysis.     

Compressibility and permeability of sand–kaolin mixtures. Experiments versus non‐linear homogenization schemes

This study deals with the behaviour of mixtures of sand and saturated kaolin paste considered as composite materials made of permeable and deformable (with non‐linear behaviour) matrix (the kaolin paste) with rigid and impervious inclusions (the sand grains). Oedometric and permeability tests highlight the key role of the state of the clay paste, and show the existence of a threshold of sand grain concentration above which a structuring effect influences both compressibility and permeability. At the light of these experiments two homogenization schemes (with simplifying assumptions to make the problem manageable) are considered to model these two parameters. Qualitative and quantitative comparisons with experimental data point out their respective domain of interest and limitations: a tangent homogenization scheme is shown to be sufficient to describe the macroscopic properties for dilute sand concentration; above the concentration threshold, the structuring effect is captured by the new homogenization scheme developed in this paper. Copyright © 2010 John Wiley & Sons, Ltd.     

AFORS autonomous fibre-optic rotational seismograph: Design and application

We outline the research leading to development of the Autonomous Fibre-Optic Rotational Seismograph (AFORS) and describe the final version of the instrument. The instrument with linear changes of sensitivity keeps accuracy from 5.1 × 10⁻⁹ to 5.5 × 10⁻⁸ rad/s in the detection bandpass 1.66–212.30 Hz; it is designed for a direct measurement of rotational components emitted during seismic events. The presented system is based on the optical part of the fibre optic gyro construction where a special autonomous signal processing unit (ASPU) optimizes its operation for the measurement of rotation motions instead of the angular changes. The application of a newly designed telemetric system based on the Internet allows for a remote system control, as shown in an example of the system’s operation in Książ (Poland) seismological observatory.     

Biosorption of cadmium(II), lead(II) and cobalt(II) from aqueous solution by biochar from cones of larch (<Emphasis Type="Italic">Larix decidua</Emphasis> Mill. <Emphasis Type="Italic">subsp. decidua</Emphasis>) and spruce (<Emphasis Type="Italic">Picea abies</Emphasis> L. H. Karst)

Because of their physicochemical properties, biochars can be used as sorption materials for removal of toxic substances. The purpose of the present study was to determine whether biochar obtained from cones of larch (Larix decidua Mill. subsp. decidua) and spruce (Picea abies L. H. Karst) could be used as a sorbent for Cd²⁺, Pb²⁺ and Co²⁺ in aqueous solutions. So far, this feedstock had not been tested in this respect. The material was subjected to pyrolysis at 500 and 600 °C for the duration of 5, 10 and 15 min. The obtained pyrolysates were found to differ in terms of pH and the contents of the essential macroelements. The different values of these parameters were determined for varying temperature, duration of the pyrolysis process and type of feedstock. Sorption capacities of the biochars for removal of Cd²⁺, Pb²⁺ and Co²⁺ were examined using simulated contamination of aqueous solutions with salts of these metals. The findings showed the highest, nearly complete, removal for Pb²⁺ were maximum 99.7%, and almost three times lower value for Cd²⁺ and Co²⁺ (respectively, 35.7 and 24.8%). It was demonstrated that pyrolysis of conifer cones produced optimum sorption capacities when the process was conducted at a temperature of 500 °C for the duration of 5 min. It was shown that products of spruce cone pyrolysis were characterized by better sorption capacity in comparison with products of larch cone pyrolysis. The properties of conifer cone biochar create the possibility of using it as an adsorbent in water and wastewater treatment as well as in production of filters and activated carbon.     

High‐precision U–Pb age and duration of the latest Devonian (Famennian) Hangenberg event,and its implications

Precise U–Pb zircon dates from three volcanic ash beds that bracket the Hangenberg Shale in the Holy Cross Mountains, Poland, constrain the age and duration of one of the most significant palaeobiological events of the Palaeozoic Era, the Hangenberg Event. It is linked to a terminal Devonian global shift from greenhouse to icehouse climate conditions, a global transgression, and widespread black shale deposition. Our results constrain the Hangenberg Event to between 358.97 ± 0.11 Ma and 358.89 ± 0.20 Ma, with a calculated duration of 0.05 +0.14/?0.05 Ma. A third, underlying ash bed yielded a distinctly older age of 359.97 ± 0.46 Ma. The duration of ~50–100 ka. for the event is comparable to those of Quaternary glaciations, and is consistent with both a glacio‐eustatic origin for the eustatic fluctuations and changes in ocean chemistry that led to this major reorganization of the biosphere.     

Sunshine duration and its variability in the main ridge of the Karkonosze Mountains in relation to with atmospheric circulation

Theoretical and Applied Climatology - Sunshine duration analysis was based on a series of measurements spanning the period from 1901 to 2014 for Śnieżka (1603&nbsp;m&nbsp;a.s.l.)...     

Modeling and monitoring of mine water rebound in an abandoned coal mine complex: Siersza Mine, Upper Silesian Coal Basin, Poland

A variable-volume, head-dependent mine water filling model (MIFIM) has been utilized to simulate the post-abandonment flooding of the Siersza coal mine in the Upper Silesian Coal Basin of southern Poland. It is demonstrated that desaturated pore space in the aquifer adjacent to the mine comprises a significant component of the resaturable mine-related void. The model results are very sensitive to the value of this poorly constrained parameter. Nevertheless, the model successfully predicted the first appearance of mine water in an observation well and its subsequent rise. Despite this apparent success, it is concluded that such modeling approaches generally lack predictive power for mines in permeable, porous host rocks. As real monitoring data accumulate, however, such models can be calibrated and their utility increased.     

Ernst Julius Öpik's (1916) note on the theory of explosion cratering on the Moon's surface—The complex case of a long‐overlooked benchmark paper

High‐velocity impact as a common phenomenon in planetary evolution was ignored until well into the twentieth century, mostly because of inadequate understanding of cratering processes. An eight‐page note, published in Russian by the young Ernst Julius Öpik, a great Estonian astronomer, was among the key selenological papers, but due to the language barrier, it was barely known and mostly incorrectly cited. This particular paper is here intended to serve as an explanatory supplement to an English translation of Öpik's article, but also to document an early stage in our understanding of cratering. First, we outline the historical–biographical background of this benchmark paper, and second, a comprehensive discussion of its merits is presented, from past and present perspectives alike. In his theoretical research, Öpik analyzed the explosive formation of craters numerically, albeit in a very simple way. For the first time, he approximated relationships among minimal meteorite size, impact energy, and crater diameter; this scaling focused solely on the gravitational energy of excavating the crater (a “useful” working approach). This initial physical model, with a rational mechanical basis, was developed in a series of papers up to 1961. Öpik should certainly be viewed as the founder of the numerical simulation approach in planetary sciences. In addition, the present note also briefly describes Nikolai A. Morozov as a remarkable man, a forgotten Russian scientist and, surprisingly, the true initiator of Öpik's explosive impact theory. In fact, already between 1909 and 1911, Morozov probably was the first to consider conclusively that explosion craters would be circular, bowl‐shaped depressions even when formed under different impact angles.