An instrument for commissioning the active and adaptive optics of modern telescopes: the Infrared Test Camera for the Large Binocular Telescope

We describe the design, integration, and operation of the infrared test cameras for the commissioning of the Large Binocular Telescope. The design and construction phase lasted slightly more than one year from February 2007 to April 2008 and was the result of a joint collaboration among INAF Osservatorio Astronomico di Bologna, Università di Bologna Dipartimento di Astronomia (Italy) and the Max-Planck-Institut für Astronomie (Heidelberg, Germany). Thereafter, the camera was delivered to the LBT Observatory (USA) for commissioning of the telescope active optics and, more recently, for commissioning of the first light adaptive optics.     

Omeonga—A possible large impact structure on the Eastern Kasai Province (D.R. Congo)?

Abstract– The Omeonga ring structure (D.R. Congo) shows a remarkable drainage pattern encircling an area up to 45 km wide and encompassing a central smoothed relief 20 km wide. This inner circular ridge is elevated about 70 m above the ring depression corresponding to the bed of the Unia River, which flows between the inner ridge and an outer irregular ridge. Landsat 7 ETM and ASTER DEM show that the structural characteristics resemble those of several wide impact structures known on Earth. Other geological modes of origin that could produce ring structures, such as magmatic activity, salt diapirism, and karst dissolution have been considered. However, after evaluating the regional stratigraphy, the distribution of volcanism, and morphometry, these processes seem to be rather unlikely. If of impact origin, the age of the Omeonga structure can be constrained to the Late Cretaceous‐Cenozoic according to the youngest units in which the ring structure was formed.     

POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

Structure, thermodynamics, and diffusion in CaAl2Si2O8 liquid from first-principles molecular dynamics

We have performed first-principles molecular dynamics simulations of CaAl₂Si₂O₈ (anorthite) liquid at pressures up to 120 GPa and temperatures of 3000, 4000 and 6000 K. At the lowest degrees of compression the liquid is seen to accommodate changes in density through decreasing the abundance of 3- and 4-membered rings, while increases in coordination of network forming cations take effect at somewhat higher degrees of compression. Results are fit to a fundamental thermodynamic relation with 4th order finite strain and 1st order thermal variable expansions. Upon compression by a factor of two, the Grüneisen parameter (γ) is found to increase continuously from 0.35 to 1.10. Weak temperature dependence in γ is thermodynamically consistent with a slight decrease in isochoric heat capacity (C_V), for which values of between 4.4 and 5.2 Nk_B are obtained, depending on the temperature. Pressure and temperature dependence of self-diffusivities is found to be well represented by an Arrhenius relation, except at 3000 K and pressures lower than 5 GPa, where self-diffusivities of Si, Al, and O increase with pressure. Analysis of the lifetimes of individual coordination species reveals that this phenomenon arises due to the disproportionately high stability of 4-fold coordinated Si, and to a lesser extent 4-fold coordinated Al. Our results represent a marked improvement in accuracy and reliability in describing the physics of CaAl₂Si₂O₈ liquid at deep mantle pressures, pointing the way to a general thermodynamic model of melts at extreme pressures and temperatures relevant to planetary-scale magma oceans and deep mantle partial melting.     

Review: Thermal water resources in carbonate rock aquifers

The current knowledge on thermal water resources in carbonate rock aquifers is presented in this review, which also discusses geochemical processes that create reservoir porosity and different types of utilisations of these resources such as thermal baths, geothermal energy and carbon dioxide (CO₂) sequestration. Carbonate aquifers probably constitute the most important thermal water resources outside of volcanic areas. Several processes contribute to the creation of porosity, summarised under the term hypogenic (or hypogene) speleogenesis, including retrograde calcite solubility, mixing corrosion induced by cross-formational flow, and dissolution by geogenic acids from deep sources. Thermal and mineral waters from karst aquifers supply spas all over the world such as the famous bath in Budapest, Hungary. Geothermal installations use these resources for electricity production, district heating or other purposes, with low CO₂ emissions and land consumption, e.g. Germany’s largest geothermal power plant at Unterhaching near Munich. Regional fault and fracture zones are often the most productive zones, but are sometimes difficult to locate, resulting in a relatively high exploration uncertainty. Geothermal installations in deep carbonate rocks could also be used for CO₂ sequestration (carbonate dissolution would partly neutralise this gas and increase reservoir porosity). The use of geothermal installations to this end should be further investigated.     

The Late Holocene to Pleistocene tephrostratigraphic record of Lake Ohrid (Albania)

We present in this work a tephrostratigraphic record from a sediment piston core (JO 2004) from Lake Ohrid. Five tephra layers were recognised, all from explosive eruptions of southern Italy volcanoes. A multidisciplinary study was carried out, including stratigraphy, AMS ¹⁴C chronology and geochemistry. The five tephra layers were correlated with terrestrial proximal counterparts and with both marine and lacustrine tephra layers already known in the central Mediterranean area. The oldest is from Pantelleria Island (P11, 131 ka BP). Other three tephra layers are from Campanian volcanoes: X6, Campanian Ignimbrite-Y5 and SMP1-Y3 (107, 39 and 31 ka BP respectively). The youngest tephra layer corresponds to the FL eruption from Etna Volcano (3.4 ka BP). In three cases these recognitions confirm previous findings in the Balkans, while two of them were for the first time recognised in the area, with a significant enlargement of the previous assessed dispersal areas.     

Mineralogical and geochemical spatial analyses of a waste-rock dump at the Libiola Fe–Cu sulphide mine (Eastern Liguria,Italy)

In this work, we investigated a 3 ha sulphide-bearing waste-rock dump (Libiola Mine, Italy) using mineralogical, geochemical, and geostatistical analyses. The dumped materials were highly heterogeneous in grain size and lithology and varied both laterally and vertically. Other than the host rock of the ore, basalts and serpentinites, the dumped materials contained high amounts of low-grade chalcopyrite- and pyrite-rich mineralisations. Due to these characteristics and to the absence of minerals able to neutralise acidity, this waste-rock dump can be classified as an acid mine drainage (AMD) producer. The study confirms that AMD is still active and, in the best scenario, can persist for up to 6.17 × 10³ years. The consequences of this process are of serious environmental concern as it involves strong acidification of the circulating waters, the release of potentially toxic metals into the soil, streams and rivers and the precipitation of huge quantities of secondary Fe-oxides and Fe-oxyhydroxides.     

The catalog of the meteorite collection of the Italian Museum of Planetary Sciences in Prato (Italy)

For the first time, this paper presents to the planetary scientists' community the catalog of the meteorite collection preserved at the Italian Museum of Planetary Sciences (Museo Italiano di Scienze Planetarie, henceforth MISP) in Prato (Italy). Founded in 2005, MISP is a type specimen official repository approved by the Nomenclature Committee of the Meteoritical Society. It represents one of the few museums worldwide entirely devoted to planetary sciences. The catalog of its meteorite collection encompasses 430 meteorites for a total of 1536 specimens, including 291 thin sections, 184 thick sections, and 278 specimens that MISP has classified. Furthermore, MISP is currently classifying 57 other meteorites. Some samples were found during meteorite recovery expeditions in hot deserts, promoted by MISP in collaboration with diverse Italian universities and national research institutions. MISP also keeps an impact rocks collection comprising 257 samples. In a country like Italy, where most of the collected meteorites are housed in museums whose catalogs are not available online, the publication of the MISP meteorite collection catalog, together with the catalog of the impact rocks collection, represents not only a significant scientific primary source but also a remarkable tool for disseminating meteoritics to nonresearch audiences in educational activities and citizen science projects.     

Comparing seven candidate mission configurations for temporal gravity field retrieval through full-scale numerical simulation

The goal of this contribution is to focus on improving the quality of gravity field models in the form of spherical harmonic representation via alternative configuration scenarios applied in future gravimetric satellite missions. We performed full-scale simulations of various mission scenarios within the frame work of the German joint research project “Concepts for future gravity field satellite missions” as part of the Geotechnologies Program, funded by the German Federal Ministry of Education and Research and the German Research Foundation. In contrast to most previous simulation studies including our own previous work, we extended the simulated time span from one to three consecutive months to improve the robustness of the assessed performance. New is that we performed simulations for seven dedicated satellite configurations in addition to the GRACE scenario, serving as a reference baseline. These scenarios include a “GRACE Follow-on” mission (with some modifications to the currently implemented GRACE-FO mission), and an in-line “Bender” mission, in addition to five mission scenarios that include additional cross-track and radial information. Our results clearly confirm the benefit of radial and cross-track measurement information compared to the GRACE along-track observable: the gravity fields recovered from the related alternative mission scenarios are superior in terms of error level and error isotropy. In fact, one of our main findings is that although the noise levels achievable with the particular configurations do vary between the simulated months, their order of performance remains the same. Our findings show also that the advanced pendulums provide the best performance of the investigated single formations, however an accuracy reduced by about 2–4 times in the important long-wavelength part of the spectrum (for spherical harmonic degrees ${<}50$ ), compared to the Bender mission, can be observed. Concerning state-of-the-art mission constraints, in particular the severe restriction of heterodyne lasers on maximum range-rates, only the moderate Pendulum and the Bender-mission are beneficial options, of course in addition to GRACE and GRACE-FO. Furthermore, a Bender-type constellation would result in the most accurate gravity field solution by a factor of about 12 at long wavelengths (up to degree/order 40) and by a factor of about 200 at short wavelengths (up to degree/order 120) compared to the present GRACE solution. Finally, we suggest the Pendulum and the Bender missions as candidate mission configurations depending on the available budget and technological progress.