Contrǒle des concentrations d'aluminium dissous dans les eaux des sources thermales

We analized about 100 hot springs of different regions in France for dissolved Al. In an area where the chemical composition of the springs for major elements is about the same and the emergence temperatures are different, we usually observe correlations between dissolved Al and temperature. This correlation is positive in the case of high pH hot springs (Pyrénées). On the contrary, the correlation is negative for the CO₂ rich waters of the Massif Central (Vichy). We also observe intermediate patterns, where Al concentrations are roughly independant of the temperature.Using a set of consistant values of thermodynamical data for ions and minerals of Al, we find that the observed correlations between Al and temperature are related to the solubility of a mineral which is generally kaolinite.     

Density model of the lithosphere in the Tsushima Basin, Sea of Japan

The 2-D density modeling of the sublatitudinal deep seismic sounding profile in the Tsushima Basin (Sea of Japan) was performed. The available data allow us to presume that the opening of the Tsushima Basin took place under conditions of an anomalously heated mantle that fostered emplacement of mantle material into the basinal crust and basin/continental margin transition zone of the Korean Peninsula attended by formation of the oceanic crust. The increased (relative to the normal oceanic crust) thickness of the basinal crust was conditioned by the accumulation of a large amount of terrigenous material and volcanogenic rocks in the upper part of the crust and underplating of mantle material in the crustal base.     

Odyssey: a solar system mission

The Solar System Odyssey mission uses modern-day high-precision experimental techniques to test the laws of fundamental physics which determine dynamics in the solar system. It could lead to major discoveries by using demonstrated technologies and could be flown within the Cosmic Vision time frame. The mission proposes to perform a set of precision gravitation experiments from the vicinity of Earth to the outer Solar System. Its scientific objectives can be summarized as follows: (1) test of the gravity force law in the Solar System up to and beyond the orbit of Saturn; (2) precise investigation of navigation anomalies at the fly-bys; (3) measurement of Eddington’s parameter at occultations; (4) mapping of gravity field in the outer solar system and study of the Kuiper belt. To this aim, the Odyssey mission is built up on a main spacecraft, designed to fly up to 13 AU, with the following components: (a) a high-precision accelerometer, with bias-rejection system, measuring the deviation of the trajectory from the geodesics, that is also giving gravitational forces; (b) Ka-band transponders, as for Cassini, for a precise range and Doppler measurement up to 13 AU, with additional VLBI equipment; (c) optional laser equipment, which would allow one to improve the range and Doppler measurement, resulting in particular in an improved measurement (with respect to Cassini) of the Eddington’s parameter. In this baseline concept, the main spacecraft is designed to operate beyond the Saturn orbit, up to 13 AU. It experiences multiple planetary fly-bys at Earth, Mars or Venus, and Jupiter. The cruise and fly-by phases allow the mission to achieve its baseline scientific objectives [(1) to (3) in the above list]. In addition to this baseline concept, the Odyssey mission proposes the release of the Enigma radio-beacon at Saturn, allowing one to extend the deep space gravity test up to at least 50 AU, while achieving the scientific objective of a mapping of gravity field in the outer Solar System [(4) in the above list].      

The Bayesian approach applied to GPS ambiguity resolution. A mixture model for the discrete–real ambiguities alternative

 The problem of phase ambiguity resolution in global positioning system (GPS) theory is considered. The Bayesian approach is applied to this problem and, using Monte Carlo simulation to search over the integer candidates, a practical expression for the Bayesian estimator is obtained. The analysis of the integer grid points inside the search ellipsoid and their evolution with time, while measurements are accumulated, leads to the development of a Bayesian theory based on a mathematical mixture model for the ambiguity. Received: 29 March 2001 / Accepted: 3 September 2001     

Petrology of garnet — cordierite — sillimanite gneisses from the El Tormes thermal dome,Iberian Hercynian foldbelt (W Spain)

The core of the El Tormes thermal dome, situated in the central part of one of the main metamorphic belts of the Iberian Peninsula, is formed by garnet-cordierite-biotite-sillimanite pelitic gneisses. These rocks, that very often are cut by minor intrusions of Al-rich S-type granites, are metatexitic gneisses in which there exists garnet showing different stages of resorption and transformation into an aggregate of cordierite±plagioclase±biotite. The garnet, mantled and corroded mainly by cordierite, has never been found to occur in contact with the prismatic sillimanite of the matrix, thus indicating that the continuous reaction Gr+Sill+Q = Cd has taken place. The presence of corroded biotite inside the garnet-rimming cordierite of the aggregates as well as inside the cordierite of the matrix, which usually includes remmants of sillimanite, indicates that the continuous reaction Bi+Sill+Q = Cd+FK+H₂O has occurred too. Therefore, a realistic net reaction for these aggretates should be represented by the univariant, at a given , equilibrium: Biotite+Sillimanite+Garnet+Quartz = Cordierite+K-feldspar+H₂O (1)The important garnet resorption near the anatectic granitic veins implies that this process is favoured by a decrease in , this factor being otherwise buffered by the reaction (1) assemblage.The most probable P-T path, assuming these conditions, consistent with the AFM projection of the former (inferred) and present assemblages in the aggregates and in the matrix, implies a decrease in P coeval with a decrease in T (Fig. 4, path 2).The most reliable P-T determination for the final stage of garnet breakdown through reaction (1), based on the coexistence of the seven phase assemblage garnet — cordierite — biotite — sillimanite — plagioclase — potash feldspar — quartz plus melt, gives 695° C, 4.3 kbar, = 0.5, The maximum pressure for this process, obtained from the garnet — plagioclase equilibrium, is 6.5±1 kbar at the same temperature.The estimates of the T for the garnet core-garnet included biotite pairs are consistently lower, ca. 550° C, than those obtained for the garnet rim-biotite in aggregates, ca. 645° C, or garnet rim-adjacent cordierite pairs, ca. 695° C.It may, therefore, be supposed that, during their evolution these rocks underwent first an increase in T and then, during the last stages, as garnet and biotite brokedown, a decrease in P and T. This represents an uplift of the core of El Tormes dome under high grade amphibolite to low pressure granulite facies conditions, accompanied by a process of partial melting with local decrase in . It is suggested, from mineral growth-deformation relationships, that this process took place during the late hercynian deformation phases, P-3 or doming stage.     

Impacts of land use on the hydrological response of tropical Andean catchments

Changes in land use and land cover are major drivers of hydrological alteration in the tropical Andes. However, quantifying their impacts is fraught with difficulties because of the extreme diversity in meteorological boundary conditions, which contrasts strongly with the lack of knowledge about local hydrological processes. Although local studies have reduced data scarcity in certain regions, the complexity of the tropical Andes poses a big challenge to regional hydrological prediction. This study analyses data generated from a participatory monitoring network of 25 headwater catchments covering three of the major Andean biomes (páramo, jalca and puna) and links their hydrological responses to main types of human interventions (cultivation, afforestation and grazing). A paired catchment setup was implemented to evaluate the impacts of change using a ‘trading space‐for‐time’ approach. Catchments were selected based on regional representativeness and contrasting land use types. Precipitation and discharge have been monitored and analysed at high temporal resolution for a time period between 1 and 5 years. The observed catchment responses clearly reflect the extraordinarily wide spectrum of hydrological processes of the tropical Andes. They range from perennially humid páramos in Ecuador and northern Peru with extremely large specific discharge and baseflows, to highly seasonal, flashy catchments in the drier punas of southern Peru and Bolivia. The impacts of land use are similarly diverse and their magnitudes are a function of catchment properties, original and replacement vegetation and management type. Cultivation and afforestation consistently affect the entire range of discharges, particularly low flows. The impacts of grazing are more variable but have the largest effect on the catchment hydrological regulation. Overall, anthropogenic interventions result in increased streamflow variability and significant reductions in catchment regulation capacity and water yield, irrespective of the hydrological properties of the original biome. Copyright © 2016 The Authors. Hydrological Processes. Published by John Wiley & Sons Ltd.     

New Determinations of the Ages of Tide in the North Atlantic Ocean

Ages of tide provide relevant information about the spatial distribution of existing anomalies in the normal modes of the oceans, because a delay may be associated with bottom friction energy dissipation, closely located resonances, bathymetric gradients, or radiational effects. The determination of other parameters, such as the age of diurnal tide or age of parallax, also provide further knowledge about the ocean's hydrodynamical response to acting forces. Following the development of new ocean models and the availability of a greater amount of data, these parameters can be redetermined. We present the spatial distribution of these parameters in the Northeast Atlantic Ocean and the Mediterranean Sea, obtained from 507 stations. The results are discussed in terms of bathymetric models, coastal features, sea surface temperature, wind and other environmental factors.     

Cambrian–early Ordovician volcanism across the South Armorican and Occitan domains of the Variscan Belt in France: Continental break-up and rifting of the northern Gondwana margin

The Cambrian–lower Ordovician volcanic units of the South Armorican and Occitan domains are analysed in a tectonostratigraphic survey of the French Variscan Belt. The South Armorican lavas consist of continental tholeiites in middle Cambrian–Furongian sequences related to continental break-up. A significant volcanic activity occurred in the Tremadocian, dominated by crustal melted rhyolitic lavas and initial rifting tholeiites. The Occitan lavas are distributed into five volcanic phases: (1) basal Cambrian rhyolites, (2) upper lower Cambrian Mg-rich tholeiites close to N-MORBs but crustal contaminated, (3) upper lower–middle Cambrian continental tholeiites, (4) Tremadocian rhyolites, and (5) upper lower Ordovician initial rift tholeiites. A rifting event linked to asthenosphere upwelling took place in the late early Cambrian but did not evolve. It renewed in the Tremadocian with abundant crustal melting due to underplating of mixed asthenospheric and lithospheric magmas. This main tectono-magmatic continental rift is termed the “Tremadocian Tectonic Belt” underlined by a chain of rhyolitic volcanoes from Occitan and South Armorican domains to Central Iberia. It evolved with the setting of syn-rift coarse siliciclastic deposits overlain by post-rift deep water shales in a suite of sedimentary basins that forecasted the South Armorican–Medio-European Ocean as a part of the Palaeotethys Ocean.     

Quaternary reactivation of flexural-slip folds by diapiric activity: example from the western Ebro Basin (Spain)

In the western sector of the Ebro Basin two types of structures deform the Quaternary terraces and pediments developed by the Ebro River and its tributaries: (1) folds up to 10 km long in the lower levels of fluvial terraces and (2) normal listric faults that produce tilting and rollover anticlines of the Quaternary deposits. Both types of structures are linked to the geometrical and lithological features of the Tertiary beds that underlie the Quaternary deposits. Quaternary folds, whose axes are parallel to the strike of the Tertiary beds, are the result of reactivation of Tertiary large-scale (60 km long) folds due to diapirism of their gypsum cores, where the gypsum units reach a maximum thickness of 3 000 m. This reactivation produced flexural-slip in some beds on the limbs of the folds, bringing about the folding of the overlying Quaternary terraces. The mechanism of Quaternary folding involves layer-parallel shear in alternating Tertiary units and folding linked to detachments and reverse layer-parallel faults. Normal listric faults are widespread throughout the studied area. They are partly parallel to low dipping Tertiary beds and are the result of a NNE-SSW tectonic extension, compatible with minor structures and focal mechanisms of recent earthquakes. The relationship between the two kinds of Quaternary structures indicates that diapirism of the gypsum cores of the anticlines was activated by extensional tectonics.