Fatty acid profiles of benthic environment associated with artificial reefs in subtropical Hong Kong

Artificial reefs can enhance habitat heterogeneity, especially in seabed degraded by bottom-dredging and trawling. However, the trophodynamics of such reef systems are not well understood. This study provided baseline data on trophic relationships in the benthic environment associated with artificial reefs in late spring and mid summer of subtropical Hong Kong, using fatty acid profiles as an indicator. Data from sediments collected at the reef base, materials from sediment traps deployed on top and bottom of the reefs, total particulate matter from the water column and oyster tissues from reef surface were subjected to principal component analysis. Results showed variations of fatty acid profiles in the total particulate matter, upper sediment trap and oyster tissue samples collected in the two samplings, indicating seasonal, trophodynamic changes within the reef system. The wastes produced by fish aggregating at the reefs can also contribute a source of biodeposits to the nearby benthic environment.     

Changes to sediment sources following wildfire in a forested upland catchment,southeastern Australia

Few investigations link post‐fire changes to sediment sources and erosion processes with sediment yield response at the catchment scale. This linkage is essential if downstream impacts on sediment transport after fire are to be understood in the context of fire effects across different forest environments. In this study, we quantify changing source contributions to fine sediment (<63 µm) exported from a eucalypt forest catchment (136 ha) burnt by wildfire. The study catchment is one of a pair of research catchments located in the East Kiewa River valley in southeastern Australia that have been the subject of a research program investigating wildfire effects on runoff, erosion, and catchment sediment/nutrient exports. This previous research provided the opportunity to couple insights gained from a range of measurement techniques with the application of fallout radionuclides ¹³⁷Cs and ²¹⁰Pb_ex to trace sediment sources. It was found that hillslope surface erosion dominated exports throughout the 3·5‐year post‐fire measurement period. During this time there was a pronounced decline in the proportional surface contribution from close to 100% in the first six months to 58% in the fourth year after fire. Over the study period, hillslope surface sources accounted for 93% of the fine sediment yield from the burnt catchment. The largest decline in the hillslope contribution occurred between the first and second years after fire, which corresponded with the previously reported large decline in sediment yield, breakdown of water repellency in burnt soils, substantial reduction in hillslope erodibility, and rapid surface vegetation recovery. Coupling the information on sediment sources with hillslope process measurements indicated that only a small proportion of slopes contributed sediment to the catchment outlet, with material derived from near‐channel areas dominating the post‐fire catchment sediment yield response. Copyright © 2011 John Wiley & Sons, Ltd.     

Discrimination between anthropogenic (pollution) and lithogenic magnetic fraction in urban soils (Delhi,India) using environmental magnetism

In this paper magnetic property of the Delhi topsoil has been used to characterize the potentially polluted areas in terms of magnetic minerals and grain (Magnetic Domain) concentration as a factor of toxic metals and other mutagenic pollutant concentration. The Saturation magnetisation (Ms) and Saturation remanence (Mrs) has been taken as proxy for ferrimagnetic mineral concentration. However, delineation of anthropogenic magnetic fraction from lithogenic (geogenic) magnetic fraction has been done by the paramagnetic/diamagnetic contribution of soil with the fact that the fresh soil contains higher paramagnetic and diamagnetic minerals than polluted. Predominantly, the topsoils of Delhi are dominated with ferrimagnetic minerals (Magnetite and Maghemite phase). Significantly the industrial areas contain highest concentration of the ferrimagnetic minerals with negligible paramagnetic/diamagnetic fraction which leads to anthropogenic contribution. Heavy traffic and densely populated areas of the Delhi exhibit moderate to low soil pollution while green areas show lowest with higher paramagnetic/diamagnetic contribution. The soils in Delhi are dominated with Pseudo-Single Domain (PSD) magnetic grain, though the industrial areas in Delhi show coarser Multidomain (MD) grains in comparison to Stable Single Domain (SSD) in forest areas. Our study reveals that the fine grain particle does not show significant link with higher concentration of ferrimagnetic minerals at least in soils. The presence of the lithogenic magnetite crystal in the forest soil and anthropogenically produced spherules in industrial areas and higher concentration of the heavy metal in Delhi soil strengthen our findings.     

Bifurcation of volcanic plumes in a crosswind

Bent-over buoyant jets distorted by a crosscurrent develop a vortex pair structure and can bifurcate to produce two distinct lobes which diverge from one another downwind. The region downwind of the source between the lobes has relatively low proportions of discharged fluid. Factors invoked by previous workers to cause or enhance bifurcation include buoyancy, release of latent heat at the plume edge by evaporating water droplets, geometry and orientation of the source, and the encounter with a density interface on the rising path of the plume. We suggest that the pressure distribution around the vortex pair of a rising plume may initially trigger bifurcation. We also report new experimental observations confirming that bifurcation becomes stronger for stronger bent-over plumes, identifying that bifurcation can also occur for straight-edged plumes but gradually disappears for stronger plumes which form a gravity current at their final level and spread for a significant distance against the current. Observations from satellites and the ground are reviewed and confirm that volcanic plumes can show bifurcation and a large range of bifurcation angles. Many of the bifurcating plumes spread out at the tropopause level and suggest the tropopause may act on the plumes as a density interface enhancing bifurcation. Even for quite moderate bifurcation angles, the two plume lobes become rapidly separated downwind by distances of tens of kilometers. Such bifurcating plumes drifting apart can only result in bilobate tephra fall deposits. The tephra fall deposit from the 16 km elevation, SE spreading, bifurcating volcanic plume erupted on 15 May 1981 from Mt Pagan was sampled by previous workers and clearly displayed bilobate characteristics. Examples of bilobate tephra fall deposits are reviewed and their origin briefly discussed. Bilobate deposits are common and may result from many causes. Plume bifurcation should be considered one of the possible mechanisms which can account for come examples of bilobate tephra fall deposits.     

Seismic performance of a 3D full‐scale high‐ductile steel–concrete composite moment‐resisting frame—Part II: Test results and analytical validation

This paper presents the results of a multi‐level pseudo‐dynamic seismic test program that was performed to assess the performance of a full‐scale three‐bay, two‐storey steel–concrete composite moment‐resisting frame built with partially encased composite columns and partial‐strength beam‐to‐column joints. The system was designed to develop a ductile response in the joint components of beam‐to‐column joints including flexural yielding of beam end plates and shear yielding of the column web panel zone. The ground motion producing the damageability limit state interstorey drift caused minor damage while the ultimate limit state ground motion level entailed column web panel yielding, connection yielding and plastic hinging at the column base connections. The earthquake level chosen to approach the collapse limit state induced more damage and was accompanied by further column web panel yielding, connection yielding and inelastic phenomena at column base connections without local buckling. During the final quasi‐static cyclic test with stepwise increasing displacement–amplitudes up to an interstorey drift angle of 4.6%, the behaviour was ductile although cracking of beam‐to‐end‐plate welds was observed. Correlations with numerical simulations taking into account the inelastic cyclic response of beam‐to‐column and column base joints are also presented in the paper together. Inelastic static pushover and time history analysis procedures are used to estimate the structural behaviour and overstrength factors of the structural system under study. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of Natural and Anthropogenic Factors on Soils,Soil Water,and Subsoil Water in Kola Peninsula

The concentrations of mobile compounds of S, Cu, and Ni are determined in podzol soils in the Murmansk region taken at different distances from Severonikel Copper–Nickel Plant and their variations are analyzed. The concentrations are found to have an effect on the distribution of these elements in lysimetric and subsoil waters.     

A method for uncertainty constraint of catchment discharge and phosphorus load estimates

River discharge and nutrient measurements are subject to aleatory and epistemic uncertainties. In this study, we present a novel method for estimating these uncertainties in colocated discharge and phosphorus (P) measurements. The “voting point”‐based method constrains the derived stage‐discharge rating curve both on the fit to available gaugings and to the catchment water balance. This helps reduce the uncertainty beyond the range of available gaugings and during out of bank situations. In the example presented here, for the top 5% of flows, uncertainties are shown to be 139% using a traditional power law fit, compared with 40% when using our updated “voting point” method. Furthermore, the method is extended to in situ and lab analysed nutrient concentration data pairings, with lower uncertainties (81%) shown for high concentrations (top 5%) than when a traditional regression is applied (102%). Overall, for both discharge and nutrient data, the method presented goes some way to accounting for epistemic uncertainties associated with nonstationary physical characteristics of the monitoring site.     

PCBs in the Hudson River

Hydrocarbon distribution in sediments from three lakes are related to the level of human activity in the respective drainage basins. Petroleum hydrocarbon contamination is found in surface sediments of a lake surrounded by a major city, compared to no detectable contamination in a lake located in a National Park.     

Intercomparison of210Pb measurements at GEOSECS station 500 in the northeast Pacific

During reoccupation of the GEOSECS-I test station in May, 1979, more than eighty 30-liter Niskin samples were collected in profile, many as replicates, for²¹⁰Pb intercomparison measurements by the WHOI, SIO and Yale groups. In addition to the inter-laboratory comparisons, the SIO group also carried out extensive experiments to test the effect of sample scavenging method. Pb equilibration time (storage effect), and filtration process on the measured²¹⁰Pb results.The intercomparison measurements indicate that there is a general agreement between the various sets of data. The sample set which allows a direct comparison at the same depth was available in most cases only between two of the three groups. The direct paired comparison shows that (1) the WHOI data are systematically 3% lower than the SIO data; (2) there are no systematic differences observed between the SIO and Yale data although the scatter is rather large; (3) the Yale data are systematically higher than the WHOI data by about 8%.The SIO experiments show that (1) the two scavenging methods employed (Fe(OH)₃ and Co-APDC co-precipitation) yield identical²¹⁰Pb results; (2) variation of Pb carrier equilibration time or of storage time has no discernible effect; (3) the filtration apparatus and procedure employed at this station do not result in²¹⁰Pb loss or contamination.The²¹⁰Pb profile structure and absolute concentration measured earlier at the same location (GOGO-II test station and GEOSECS station 347) agree with those of station 500 within 10%. The present profile shows a minimum²¹⁰Pb concentration around 500 m depth, marking the penetration depth of the flux of excess²¹⁰Pb from the atmosphere. There is a mild mid-depth maximum around 2500–3000 m. The²¹⁰Pb/²²⁶Ra activity ratio decreases monotonically from about 1 at the²¹⁰Pb minimum to about 0.5 near the bottom. The particulate²¹⁰Pb profile shows a systematic increase from the subsurface water to the bottom water by a factor of 5. This feature has been observed in many GEOSECS particulate²¹⁰Pb profiles.