Simulating the influence of various nutrient sources on hypoxia off the Changjiang River Estuary

Hypoxia is increasingly reported off the Changjiang River Estuary with the confluence of multiple high volume nutrient sources. The Regional Ocean Modeling System coupled with a biological model was used to analyze the effect of different nutrient sources on the development of hypoxia off the Changjiang River Estuary. By comparing to observed data, our model suitably captured the regional dynamics of chlorophyll a, dissolved oxygen, and nutrient concentration. A series of sensitivity experiments were conducted to investigate the hypoxia response to the various nutrient sources, such as loading from the Changjiang River, Kuroshio and Taiwan Warm Current. Our model results indicated that nutrients from different sources significantly influenced the hypoxia off the Changjiang River Estuary, and it was mostly affected by nutrients sourced from the Kuroshio. The nutrients input from the Changjiang River had larger impacts on the hypoxia in the north of 30°N than that in the south of 30°N. The nutrients sourced from the Taiwan Strait had a least influence on the hypoxia off the Changjiang River Estuary.     

基于耳石微结构的西北太平洋秋刀鱼(Cololabis saira)年龄与生长研究

根据2014年6月和10-11月在西北太平洋公海采集的168尾秋刀鱼样本,基于耳石微结构并结合基础生物学数据,鉴定了秋刀鱼的日龄,推算了孵化日期,并建立了生长模型和生长率。研究发现:耳石微结构从核心到透明区边缘,轮纹宽度由宽至窄,亮度由暗至明,标记轮多分布在透明区。日龄范围为204~549 d,优势日龄组为231~290 d和381~470 d,日龄最小个体体长207 mm,体质量39 g,日龄最大个体体长291 mm,体质量131 g。孵化日期为2012年12月至2014年4月,孵化高峰期出现在1-3月和8-10月,初步推算秋刀鱼主要分为春生群和秋生群产卵群体。体长和体质量生长模型符合Logistic生长模型。体长平均绝对生长率和相对生长率别为0.224 mm/d和0.000 88,绝对生长率随着日龄增加而减小。体质量平均绝对生长率和相对生长率别为0.293 g/d和0.003 25,最大绝对生长率（0.504 mm/d）和最大相对生长率（0.004 86）出现在351~400 d。     

Mesoscale physical processes and zooplankton transport-retention in the northern Norwegian shelf region

Northern Norwegian shelf regions are highly productive, supporting fisheries rich in commercially important species such as cod, herring and capelin. It has been long recognized that the mesoscale jets, meanders and eddies associated with interactions between the North Atlantic Current, Norwegian Coastal Current and regional bottom topographic features such as troughs, banks and shelfbreaks play important roles in transporting and retaining zooplankton. To investigate zooplankton distributions and their correspondence with the physical fields, three large-scale surveys with mesoscale resolutions on physical and biological fields were conducted in northern Norwegian shelf regions between latitudes 68°15′N and 70°15′N in springs of 2000–2002. Survey results provide insights into the relationships between zooplankton distributions and the physical features such as fronts, the Norwegian Coastal Current and eddies related to topographic features. The physical and biological data are integrated and analyzed focusing on water types, estimation of geostrophic currents from direct current measurements, along-shelf transport of zooplankton, and retention of zooplankton by the mesoscale meander–eddy over a typical bank area on the shelf. The estimated mean transport in the upper 100 m on the shelf in the survey region is approximately 6.4×10³ tonnes wet weight day⁻¹ northward. High zooplankton abundances were found over both Malangsgrunnen and Sveinsgrunnen banks. The specific accumulation rate from northward–southward transport in the upper 100 m over Malangsgrunnen was approximately 0.08 day⁻¹, while variable currents with an offshore gradient of zooplankton abundance over Sveinsgrunnen implies an offshore dispersion of coastal-originated zooplankton cohort.     

Improving performances of ITO/GaP contact on AlGaInP light-emitting diodes

In this paper AlGaInP light emitting diodes with different types of electrodes: Au/Zn/Au-ITO Au/Ti-ITO Au/Ge/Ni-ITO and Au-ITO are fabricated. The photoelectricity properties of those LEDs are studied. The results show that the Au/Zn/Au electrode greatly improves the performance of LEDs compared with the other electrodes. Because the Au/Zn/Au electrode not only forms a good Ohmic contact with indium tin oxide (ITO), but also reduces the specific contact resistances between ITO and GaP, which are 1.273×10^-6 Ω · cm² and 1.743×10^-3 Ω ·cm² between Au/Zn/Au-ITO and ITO-GaP respectively. Furthermore, the textured Zn/Au-ITO/Zn electrode is designed to improve the performances of LEDs, reduce the forward-voltage of the LED from 1.93 to 1.88 V, and increase the luminous intensity of the LEDs from 126 to 134 mcd when driven at 20 mA.     

An interconnect width and spacing optimization model considering scattering effect

As the feature size of the CMOS integrated circuit continues to shrink, the more and more serious scattering effect has a serious impact on interconnection performance, such as delay and bandwidth. Based on the impact of the scattering effect on latency and bandwidth, this paper first presents the quality-factor model which optimises latency and bandwidth effectively with the consideration of the scattering effect. Then we obtain the analytical model of line width and spacing with application of curve-fitting method. The proposed model has been verified and compared based on the nano-scale CMOS technology. This optimisation model algorithm is simple and can be applied to the interconnection system optimal design of nano-scale integrated circuits.     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.     

锌对虾夷扇贝和刺参幼体的毒性效应

以虾夷扇贝和刺参幼体为材料,采用急性毒性试验和亚急性毒性试验的方法,研究了锌对虾夷扇贝稚贝及幼贝和刺参幼虫的毒性效应。结果显示,锌对虾夷扇贝稚贝的２４ｈＬＣ５０ ６．４０ｍｇ／Ｌ,４８ｈＬＣ５０为３．３１ｍｇ／Ｌ,７２ｈＬＣ５０为１．３９ｍｇ／Ｌ,９６ｈＬＣ５０为０．６１ｍｇ／Ｌ;而对幼贝的２４ｈＬＣ５０为３．３２ｍｇ／Ｌ,４８ｈＬＣ５０为２．６４ｍｇ／Ｌ。７２ｈＬＣ５０为１．７６ｍｇ／Ｌ,９６ｈ     

福建湄洲岛周围海域浮游动物的分布

根据１９９０年５月至１９９１年１月采自湄洲岛海域的浮游动物样品,鉴定出１０种终生浮游动物和１２类阶段性浮游幼体,桡足类的种类和数量在群落中均占优势。中华哲水蚤、精致真刺水蚤、中华假磷虾、肥胖箭虫和短尾类溲状幼体为主要优势种。海龙箭虫、拟经车浅室水母、针刺真浮莹等１０种,四季都有分布,本文还描述了总生物量,总个体和主要种类的分布,并对夏季浮游动物的分布与上升流的关系,以及总生物量季节纱明显进行了讨论     

黄海温度锋及断面水温分布数值预报试验硏究

自Simpson和Hunter(1974)在对夏季爱尔兰海的研究中提出潮混合控制潮汐锋的概念以来,人们相继在许多强潮浅水区发现了潮汐锋现象,并做了大量的研究工作,对锋区的流场结构等特征,以及潮汐锋对周围环境的影响等有了更多的了解。在我国,赵保仁(1985)首先提出黄海存在潮汐锋现象,认为冷水团的温度锋可看作是底层的潮汐锋,并可利用近最大潮流流速计算层化参量来确定黄海潮汐锋(从而亦即温度锋)的位置,而且还可以根据已有调查资料和卫星图片揭示它的一些变化规律。他与合作者的一系列研究工作表明:黄海的潮混合及潮汐锋现象对黄海的温盐和水团分布、层化现象、强温跃层的分布变化、黄海的水平和垂直环流有重要影响和直接关系,进而可以推测黄海的潮混合及潮汐锋现象对黄海的物质输运、生态环境等有着重要的影响,因此研究黄海潮混合形成的温度锋和断面温度分布的数值预报方法是非常有必要的。 以往关于潮汐锋的数值研究大多数是诊断模式,用于求解潮汐锋形成以后锋区的环流结构等,而用数值方法模拟潮汐锋的形成和演化的工作却很少。在国外,只有王东平等(Wang et al.,1990)用二维模型,对垂直涡动扩散和粘性系数采用Munk-Anderson格式与湍流封闭格式嵌套的方法以反映边界层的作用,利用实测的大气强迫力和数值计算的潮流模拟了英国Celtic海的潮汐锋和海洋层化的变化问题,尚未涉及潮汐锋的形成过程。在国内,Bi和Zhao(1993)用一个二维数值模式对黄海34°N的潮汐锋进行了模拟,较好地模拟了从4月到8月潮汐锋的形成和演化过程。在此基础上,我们将进一步利用潮流分布及海面的热量和动量输入条件,以垂直均匀状态为初始条件,模拟黄海各主要断面的温度分布、温度锋和温跃层在增温期的形成和演化过程。     

Mechanical properties of calcareous silts in a hydraulic fill island-reef

Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm³, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm³, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.