A Long-Term Decrease of the Mid-Size Segmentation Lengths Observed in the He <Emphasis Type="SmallCaps">ii</Emphasis> (30.4 nm) Solar EUV Emission

Power spectra of segmentation-cell length (a dominant length scale of EUV emission in the transition region) from full-disk He?ii extreme ultraviolet (EUV) images observed by the Extreme ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SOHO) and the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) during periods of quiet-Sun conditions for a time interval from 1996 to 2015 were analyzed. The spatial power as a function of the spatial frequency from about 0.04 to 0.27 (EIT) or up to 0.48 (AIA) Mm^?1 depends on the distribution of the observed segmentation-cell dimensions – a structure of the solar EUV network. The temporal variations of the spatial power reported by Didkovsky and Gurman (Solar Phys. 289, 153, 2014) were suggested as decreases at the mid-spatial frequencies for the compared spectra when the power curves at the highest spatial frequencies of 0.5 pix^?1 were adjusted to match each other. This approach has been extended in this work to compare spectral ratios at high spatial frequencies expressed in the solar spatial frequency units of Mm^?1. A model of EIT and AIA spatial responses allowed us to directly compare spatial spectral ratios at high spatial frequencies for five years of joint operation of EIT and AIA, from 2010 to 2015. Based on this approach, we represent these ratio changes as a long-term network transformation that may be interpreted as a continuous dissipation of mid-size network structures to the smaller-size structures in the transition region. In contrast to expected cycling of the segmentation-cell dimension structures and associated spatial power in the spectra with the solar cycle, the spectra demonstrate a significant and steady change of the EUV network. The temporal trend across these structural spectra is not critically sensitive to any long-term instrumental changes, e.g. degradation of sensitivity, but to the change of the segmentation-cell dimensions of the EUV network structure.     

Climatic and geographic factors affect ecosystem multifunctionality through biodiversity in the Tibetan alpine grasslands

Ecosystem multifunctionality(EMF), the simultaneous provision of multiple ecosystem functions, is often affected by biodiversity and environmental factors. We know little about how the interactions between biodiversity and environmental factors affect EMF. In this case study, a structural equation model was used to clarify climatic and geographic pathways that affect EMF by varying biodiversity in the Tibetan alpine grasslands. In addition to services related to carbon, nitrogen, and water cycling, forage supply, which is related to plantproductivity and palatability, was included in the EMF index. The results showed that 72% of the variation in EMF could be explained by biodiversity and other environmental factors. The ratio of palatable richness to all species richness explained 8.3% of the EMF variation. We found that air temperature, elevation, and latitude all affected EMF, but in different ways. Air temperature and elevation impacted the aboveground parts of the ecosystem, which included plant height, aboveground biomass, richness of palatable species, and ratio of palatable richness to all species richness. Latitude affected EMF by varying both aboveground and belowground parts of the ecosystem, which included palatable speciesrichness and belowground biomass. Our results indicated that there are still uncertainties in the biodiversity–EMF relationships related to the variable components of EMF, and climatic and geographic factors. Clarification of pathways that affect EMF using structural equation modeling techniques could elucidate the mechanisms by which environmental changes affect EMF.     

Resolving the landfill siting impasse: modelling technocratic and indigenous perspectives using GIS multicriteria approach

Increase in waste generation calls for an effective waste management as this has become a necessity for environmental sustainability. Several methods are adopted in managing waste, which include waste reduction, reuse, thermal treatment, recycling and landfilling. The landfill method is recognised as the most used of all the waste management methods in developing countries such as Ghana. However, the selection of a suitable landfill site is very difficult and tedious. This is because it involves a consideration of many factors such as environmental, topographic, economic, socio-cultural and civil engineering. This research sought to identify a suitable landfill site by applying GIS multicriteria and weighted overlay approach in the Bongo District of Northern Ghana. The analysis relied on criteria and weights provided by the technocrats and the indigenes in the district as a way of demonstrating how landfill siting impasse can be resolved by incorporating the various stakeholders. The results obtained provided clear areas for landfill sites in the study area from the technocratic and the indigenous perspectives. However, the technocratic perspective failed to include an important cultural criterion, sacred groves, as a factor. The indigenous perspective also compromised on the factor related to nearness to residential areas, and is equally not sufficient on its own. The optimal landfill sites, which meets the expectations of both the technocrats and indigenes, was identified. This perspective has produced technically favourable and socio-culturally acceptable landfill site. However, it is recommended an environmental impact assessment (EIA) be conducted to identify the full environmental and social cost of the site. It is concluded that in landfill site selection much attention be given to cultural factors in the same way as the technical factors.     

Understanding the implications of the EU-LULUCF regulation for the wood supply from EU forests to the EU

Background

In June 2018, the European Parliament and Council of the European Union adopted a legislative regulation for incorporating greenhouse gas emissions and removals from Land Use, Land Use Change and Forestry (EU-LULUCF) under its 2030 Climate and Energy Framework. The LULUCF regulation aim to incentivise EU Member States to decrease greenhouse gas emissions and increase removals in the LULUCF sector. The regulation, however, does not set a target for increasing the LULUCF carbon sink, but rather includes a ‘no net debit’ target for LULUCF (Forests and Agricultural soils). For Managed Forest Land (MFL) an accounting framework with capped credits for additional mitigation against a set forest reference level (FRL) was agreed for 2021–2030. The FRL gives the projected future carbon sink in the two compliance periods 2021–2025 and 2026–2030 under “continuation of forest management practices as they were in the reference period 2000–2009”. This FRL was disputed by some Member States as it was perceived to put a limit on their future wood harvesting from MFL. Here we simulated with the EFISCEN European forest model the “continuation of forest management practices” and determined the corresponding wood harvest for 26 EU countries under progressing age classes.

Results

The simulations showed that under “continuation of forest management practices” the harvest (wood removals) in the 26 EU countries as a whole can increase from 420 million m³/year in 2000–2009 to 560 million m³/year in 2050 due to progressing age classes. This implies there is a possibility to increase absolute wood harvests without creating debits compared to the forest reference level. However, the manner in which ‘continuation of forest management’ developed with a progressing age class development over time, meant that in some countries the future harvesting exceeded 90% of the increment. Since this generally is considered to be unsustainable we additionally set a harvesting cut-off as max 90% of increment to be harvested for each individual country as a possible interpretation of sustainability criteria that are included in the regulation. Using this additional limit the projected harvest will only increase to 493 million m³/year.

Conclusions

The worry from Member States (MS) that the FRL will prevent any additional harvesting seems unwarranted. Due to differences between Member States concerning the state of their forest resources, the FRL as a baseline for harvesting works out very differently for the different Member States. The FRL may have other unforeseen consequences which we discuss. Under all scenarios the living forest biomass sink shows a decline. This can be counteracted through incentivising measures under Climate Smart Forestry.

     

Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.     

A Comparison between WCS and OPeNDAP for Making Model Results and Data Products Available through the Internet

Numerical models produce output with a large number of variables, grid cells and time steps. The same applies to algorithms that produce gridded datasets from sparse or abundant raw data. Further use of the resulting data products has been challenging, especially for dissemination outside the institute of origin. Due to the gradually increasing size of data products, simply downloading copies of them is becoming impossible. A gradual transition from traditional download methods to web services is therefore observed. Web services allow for on‐the‐fly access to subsets of data that were hitherto considered as indivisible granules. Here we compare the most mature candidates to serve gridded data through the web: the Open‐source Project for a Network Data Access Protocol (OPeNDAP) and Web Coverage Service (WCS) protocols. In the framework of the new Dutch National Model and Data Centre (NMDC.eu) a distributed data storage has been created by coupling OPeNDAP servers. A WCS service layer is provided for the same data. This allows us to compare OPeNDAP and WCS. Using several use cases, we compare the usability, performance and features of the two protocols.     

Earth Observation Scientific Workflows in a Distributed Computing Environment

Geospatially Enabled Scientific Workflows offer a promising toolset to help researchers in the earth observation domain with many aspects of the scientific process. One such aspect is that of access to distributed earth observation data and computing resources. Earth observation research often utilizes large datasets requiring extensive CPU and memory resources in their processing. These resource intensive processes can be chained; the sequence of processes (and their provenance) makes up a scientific workflow. Despite the exponential growth in capacity of desktop computers, their resources are often insufficient for the scientific workflow processing tasks at hand. By integrating distributed computing capabilities into a geospatially enabled scientific workflow environment, it is possible to provide researchers with a mechanism to overcome the limitations of the desktop computer. Most of the effort on extending scientific workflows with distributed computing capabilities has focused on the web services approach, as exemplified by the OGC's Web Processing Service and by GRID computing. The approach to leveraging distributed computing resources described in this article uses instead remote objects via RPyC and the dynamic properties of the Python programming language. The Vistrails environment has been extended to allow for geospatial processing through the EO4Vistrails package ( http://code.google.com/p/eo4vistrails/ ). In order to allow these geospatial processes to be seamlessly executed on distributed resources such as cloud computing nodes, the Vistrails environment has been extended with both multi‐tasking capabilities and distributed processing capabilities. The multi‐tasking capabilities are required in order to allow Vistrails to run side‐by‐side processes, a capability it does not currently have. The distributed processing capabilities are achieved through the use of remote objects and mobile code through RPyC.     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

Phase center modeling for LEO GPS receiver antennas and its impact on precise orbit determination

Most satellites in a low-Earth orbit (LEO) with demanding requirements on precise orbit determination (POD) are equipped with on-board receivers to collect the observations from Global Navigation Satellite systems (GNSS), such as the Global Positioning System (GPS). Limiting factors for LEO POD are nowadays mainly encountered with the modeling of the carrier phase observations, where a precise knowledge of the phase center location of the GNSS antennas is a prerequisite for high-precision orbit analyses. Since 5 November 2006 (GPS week 1400), absolute instead of relative values for the phase center location of GNSS receiver and transmitter antennas are adopted in the processing standards of the International GNSS Service (IGS). The absolute phase center modeling is based on robot calibrations for a number of terrestrial receiver antennas, whereas compatible antenna models were subsequently derived for the remaining terrestrial receiver antennas by conversion (from relative corrections), and for the GNSS transmitter antennas by estimation. However, consistent receiver antenna models for space missions such as GRACE and TerraSAR-X, which are equipped with non-geodetic receiver antennas, are only available since a short time from robot calibrations. We use GPS data of the aforementioned LEOs of the year 2007 together with the absolute antenna modeling to assess the presently achieved accuracy from state-of-the-art reduced-dynamic LEO POD strategies for absolute and relative navigation. Near-field multipath and cross-talk with active GPS occultation antennas turn out to be important and significant sources for systematic carrier phase measurement errors that are encountered in the actual spacecraft environments. We assess different methodologies for the in-flight determination of empirical phase pattern corrections for LEO receiver antennas and discuss their impact on POD. By means of independent K-band measurements, we show that zero-difference GRACE orbits can be significantly improved from about 10 to 6 mm K-band standard deviation when taking empirical phase corrections into account, and assess the impact of the corrections on precise baseline estimates and further applications such as gravity field recovery from kinematic LEO positions.     

Using gravity and topography-implied anomalies to assess data requirements for precise geoid computation

Many regions around the world require improved gravimetric data bases to support very accurate geoid modeling for the modernization of height systems using GPS. We present a simple yet effective method to assess gravity data requirements, particularly the necessary resolution, for a desired precision in geoid computation. The approach is based on simulating high-resolution gravimetry using a topography-correlated model that is adjusted to be consistent with an existing network of gravity data. Analysis of these adjusted, simulated data through Stokes’s integral indicates where existing gravity data must be supplemented by new surveys in order to achieve an acceptable level of omission error in the geoid undulation. The simulated model can equally be used to analyze commission error, as well as model error and data inconsistencies to a limited extent. The proposed method is applied to South Korea and shows clearly where existing gravity data are too scarce for precise geoid computation.