New age constraints on the western Betic intramontane basins: A late Tortonian closure of the Guadalhorce Corridor?

Several gateways connected the Mediterranean with the Atlantic during the late Miocene but the timing of closure and therefore their role prior to and during the Messinian Salinity Crisis (5.97–5.33 Ma) is still under debate. The timing of closure of the Guadalhorce Corridor is especially disputed as the common lack of marine microfossils hampers precise age determination. Here we present new biostratigraphic age constraints on the sediments of the Ronda, Antequera and Arcos regions, which formed the northern part of the Guadalhorce Corridor. The general presence of Globorotalia menardii 4 in the youngest deep‐marine sediments of all three regions indicates a late Tortonian age, older than 7.51 Ma. We conclude that the Guadalhorce Corridor closed during the late Tortonian, well before the onset of the Messinian Salinity Crisis and that the late Tortonian tectonic uplift of the eastern Betics extended into the western Betics.     

Elucidation of different forms of organic carbon in marine sediments from the Atlantic coast of Spain using thermal analysis coupled to isotope ratio and quadrupole mass spectrometry

Analysis of river, estuary and marine sediments from the Atlantic coast of Spain using thermogravimetry–differential scanning calorimetry–quadrupole mass spectrometry–isotope ratio mass spectrometry (TG–DSC–QMS–IRMS) was used to (a) distinguish bulk chemical hosts for C within a sediment and humic acid fraction, (b) track C pools with differing natural C isotope ratios and (c) observe variation with distance from the coast. This is the first application of such a novel method to the characterisation of organic matter from marine sediments and their corresponding humic acid fractions. Using thermal analysis, a labile, a recalcitrant and a refractory carbon pool can be distinguished. Extracted humic fractions are mainly of recalcitrant nature. The proportion of refractory carbon is greatest in marine sediments and humic acid fractions. Quadrupole mass spectrometry confirmed that the greatest proportion of m/z 44 (CO₂) and m/z 18 (H₂O) were detected at temperatures associated with recalcitrant carbon (510–540 °C). Isotope analysis detected progressive enrichment in δ¹³C for the sediment samples with an increase in marine influence. Isotopic heterogeneity in the refractory organic matter in marine sediments could be due to products of anthropogenic origin or natural combustion products. Isotope homogeneity of humic acids confirms the presence of terrigenous C in marine sediments, allowing the terrestrial input to be characterised.     

Superposition of tectonic structures leading elongated intramontane basin: the Alhabia basin (Internal Zones,Betic Cordillera)

International Journal of Earth Sciences - The relief of the Betic Cordillera was formed since the late Serravallian inducing the development of intramontane basins. The Alhabia basin, situated in...     

Complex site effects and building codes: Making the leap

The engineering community is aware of the importance of site effects, but it lags behind seismological studies when it comes to incorporating site effect considerations in design spectra for seismic norms. This lag is reflected in the conspicuous fact that current building codes make allowance for 1D site effects but ignore complex site effects. The purpose of this paper is to explore a way for including complex site effects in a building code environment. We take as example Eurocode 8, which is a modern code that exemplifies the current approach to site effect consideration. We examine the restrictions that we have imposed to make the problem of a feasible size and discuss the approach we have taken. We propose a strategy to incorporate a class of complex site effects in a design elastic spectrum.     

Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)

The damage distribution in Adra town (south‐eastern Spain) during the 1993 and 1994 Adra earthquakes (5.0 magnitude), that reached a maximum intensity degree of VII (European Macroseismic Scale (EMS scale)), was concentrated mainly in the south‐east zone of the town and the most relevant damage occurred in reinforced concrete (RC) buildings with four or five storeys. In order to evaluate the influence of ground condition on RC building behaviour, geological, geomorphological and geophysical surveys were carried out, and a detailed map of ground surface structure was obtained. Short‐period microtremor observations were performed in 160 sites on a 100m × 100m dimension grid and Nakamura's method was applied in order to determine a distribution map of soil predominant periods. Shorter predominant periods (0.1–0.3 s) were found in mountainous and neighbouring zones and larger periods (greater than 0.5 s) in thicker Holocene alluvial fans. A relationship T = (0.049 ± 0.001)N, where T is the natural period of swaying motion and N is the number of storeys, has been empirically obtained by using microtremor measurements at the top of 38 RC buildings (ranging from 2 to 9 storeys). 1‐D simulation of strong motion on different soil conditions and for several typical RC buildings were computed, using the acceleration record in Adra town of the 1993 earthquake. It is noteworthy that all the aforementioned results show the influence of site effects in the degree and distribution of observed building damage. Copyright © 2007 John Wiley & Sons, Ltd.     

Diffuse Emission of CO2 from Showa-Shinzan, Hokkaido, Japan: A Sign of Volcanic Dome Degassing

Two soil CO₂ efflux surveys were carried out in September 1999 and June 2002 to study the spatial distribution of diffuse CO₂ degassing and estimate the total CO₂ output from Showa-Shinzan volcanic dome, Japan. Seventy-six and 81 measurements of CO₂ efflux were performed in 1999 and 2002, respectively, covering most of Showa-Shinzan volcano. Soil CO₂ efflux data showed a wide range of values up to 552 g m^-2 d^-1. Carbon isotope signatures of the soil CO₂ ranged from -0.9‰ to -30.9‰, suggesting a mixing between different carbon reservoirs. Most of the study area showed CO₂ efflux background values during the 1999 and 2002 surveys (B = 8.2 and 4.4 g m^-2 d^-1, respectively). The spatial distribution of CO₂ efflux anomalies for both surveys showed a good correlation with the soil temperature, indicating a similar origin for the extensive soil degassing generated by condensation processes and fluids discharged by the fumarolic system of Showa-Shinzan. The total diffuse CO₂ output of Showa-Shinzan was estimated to be about 14.0–15.6 t d^-1 of CO₂ for an area of 0.53 km².     

Sky luminance distribution in Pamplona (Spain) during the summer period

In this work the outdoor daylight conditions in Pamplona (South Europe) during the summer period have been studied. The selected sky type (from fifteen standards) at a given moment is the one exhibiting the lowest RMSD when comparing the theoretical and experimental luminance distributions in the sky hemisphere. Two year data of luminance distribution registered every 10 min in 145 positions of the sky hemisphere have been used for selecting the sky type. The most frequent sky type in Pamplona is V.5 (cloudless polluted with a broad solar corona), with an occurrence of 29.5%. This result coincides with the one observed in a previous study in Athens.Six types of sky (V.5, IV.4, III.4, III.3, V.4 y II.2) out of the fifteen standards become practically the 80% of all the studied ones. Regarding a possible use in daylight climate studies, the frequency of occurrence of the fifteen types of sky for fourteen solar elevation intervals has been included.     

Mechanical Behavior of Microbially Induced Calcite Precipitation Cemented Sand

Geotechnical and Geological Engineering - New sustainable ground improvement techniques have been recently required for applications in onshore and offshore geotechnical structures. The...     

Development and behaviour of a radar-based operational tool for hailstorms identification

Hailstorms are a common meteorological phenomenon in Spain which causes substantial economic damage especially in spring and summer. During 2000 and 2001, a radar-based application for convective monitoring was developed at STAP (Forecasting and Analysis Techniques Department); in order to improve this nowcasting tool, it is needed to include an advanced procedure to estimate the presence of hail as a complementary module in the operational application. A preliminary study, carried out during 2001, showed that the Waldvogel technique, VIL (vertical integrated liquid) density and the hail detection algorithm (HDA) are the methodologies which proved more accurate in our latitudes.Throughout the spring and summer of 2001, all available information about hail events (time, place and hail size) and about storms without hail was used for tuning an experimental module to detect severe and non-severe hailstorms, taking into account the selected algorithms. During 2002, further information about storms was gathered in order to assess the behaviour of the developed hail module. Afterwards, a new module calibration was carried out with the information of the complete storms data set of 2001 and 2002. With this new calibration, the hail module became an operational tool during the spring and summer of 2003. Currently, the verification of the operational module using the data from the storms in 2003 is being elaborated. The aim of this work is to put forward the calibration procedure carried out, the verification results of 2002, and the performance of the hail estimate module in selected cases during 2003 in Spain.     

A method for checking the quality of geographic metadata based on ISO 19157

With recent advances in remote sensing, location-based services and other related technologies, the production of geospatial information has exponentially increased in the last decades. Furthermore, to facilitate discovery and efficient access to such information, spatial data infrastructures were promoted and standardized, with a consideration that metadata are essential to describing data and services. Standardization bodies such as the International Organization for Standardization have defined well-known metadata models such as ISO 19115. However, current metadata assets exhibit heterogeneous quality levels because they are created by different producers with different perspectives. To address quality-related concerns, several initiatives attempted to define a common framework and test the suitability of metadata through automatic controls. Nevertheless, these controls are focused on interoperability by testing the format of metadata and a set of controlled elements. In this paper, we propose a methodology of testing the quality of metadata by considering aspects other than interoperability. The proposal adapts ISO 19157 to the metadata case and has been applied to a corpus of the Spanish Spatial Data Infrastructure. The results demonstrate that our quality check helps determine different types of errors for all metadata elements and can be almost completely automated to enhance the significance of metadata.