Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

Effects of key components of <Emphasis Type="Italic">S. triqueter</Emphasis> root exudates on fractions and bioavailability of pyrene–lead co-contaminated soils

The key components of S. triqueter root exudates involved 4-oxo-pentanoic acid, succinic acid, glutaric acid, phthalate acid, citric acid, vanillic acid, myristic acid, pentadecanoic acid, decanoic acid, 14-methyl-pentadecanoic acid, hexadecanoic acid, octadecanoic acid and oleic acid, and the content of the water-soluble organic acids (citric acid, succinic acid and glutaric acid) significantly increased in pyrene and lead co-contaminated rhizosphere soil. These three water-soluble organic acids including citric acid, succinic acid and glutaric acid were detected as the specific root exudates of S. triqueter under stress of pollutants for pyrene and lead, so they were chosen as the research objects, and they were added into the bioremediation systems of pyrene and lead co-contaminated wetland soils. Compared with the control, the treatments added the three organic acids always improved the quantity of the bioavailable fraction of pyrene and lead in wetland soils and greatly influenced other chemical states of pyrene and lead fractions in the test concentration range. Under the 50 g kg^?1 of organic acids concentration, the amount of the bioavailable fraction of pyrene and lead increased 41.0 and 872.7 % by citric acid, respectively. The enhancement of bioavailability of pyrene and lead in the wetland soil by adding organic acids generally decreased in the following order: citric acid > succinic acid > glutaric acid. Enhancing effects of organic acids on the bioavailability improvement of pyrene and lead is remarkable.     

基于多元对应分析的国家地质公园综合价值及分类

目前地质公园的分类难以针对具有多重价值属性的各类地质公园提出行之有效的分类管理模式。提出基于综合价值的国家地质公园分类模式,建立了国家地质公园综合价值评价指标,通过问卷调查与小组讨论获取了35个国家地质公园的量化综合价值评价指标数据,应用多元对应分析对量化数据进行统计处理,最后将35个国家地质公园分为禀赋型地质公园、生态型地质公园、成熟型地质公园、均衡型地质公园和发展型地质公园五大类,为国家地质公园分类管理提供依据。     

专题地质填图及有关问题讨论

面积性地质调查及填图是今后地质调查的主要工作,如何做好这个工作,并实现地质调查和科研一体化,特别是在已有填图基础上,如何部署和开展新的填图工作,是一个亟待回答的新问题。专题地质填图是针对存在的重要地质或资源、环境问题,或是针对特定目标地质体等,以解决特定问题或满足社会特定需求为主要目的、填图与研究融为一体的地质填图,填图的范围和比例尺依据解决问题和目标地质体而定。专题地质填图是以问题和需求为驱动,是对已有的综合地质填图的补充和提高,是高效实现地调科研一体化的一种方式。论述了专题填图的内涵、必要性,以及开展专题填图的方式和方法。     

海洋重力测量数据精度分析

海洋重力测量仪器工作环境的特殊性,决定了其测量数据精度分析与检测难以方便实现。在分析一般数据处理方法的基础上,研究了海洋重力测量精度分析的特点,采用一种以重复测线不符值、测线网交叉点不符值的标准差对海洋重力测量的内符合精度进行分析,并根据重复测线、交叉点内符合精度评估方法,通过对某型海洋重力测量仪器的多次航行试验,获取了该型仪器测量数据的部分精度数据,分析结果表明该方法可以全面衡量仪器性能。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Geochemical and Petrological Studies on the Early Carboniferous Sidingheishan Mafic–Ultramafic Iintrusion in the Southern Margin of the Central Asian Orogenic Belt, NW China

The Sidingheishan mafic-ultramafic intrusion is located in the eastern part of the Northern Tianshan Mountain, along the southern margin of the Central Asian Orogenic Belt in northern Xinjiang autonomous region of China. The Sidingheishan intrusion is mainly composed of wehrlite, olivine websterite, olivine gabbro, gabbro and hornblende gabbro. At least two pulses of magma were involved in the formation of the intrusion. The first pulse of magma produced an olivine-free unit and the second pulse produced an olivine-bearing unit. The magmas intruded the Devonian granites and granodiorites.An age of 351.4±5.8 Ma(Early Carboniferous) for the Sidingheishan intrusion has been determined by U-Pb SHRIMP analysis of zircon grains separated from the olivine gabbro unit. A U-Pb age of 359.2±6.4 Ma from the gabbro unit has been obtained by LA-ICP-MS. Olivine of the Sidingheishan intrusion reaches 82.52 mole% Fo and 1414 ppm Ni. On the basis of olivine-liquid equilibria, it has been calculated that the MgO and FeO included in the parental magma of a wehrlite sample were approximately10.43 wt% and 13.14 wt%, respectively. The Sidingheishan intrusive rocks are characterized by moderate enrichments in Th and Sm, slight enrichments in light REE, and depletions in Nb, Ta, Zr and Hf. The ε_(Nd)(t) values in the rock units vary from +6.70 to +9.64, and initial ~(87)Sr/~(86)Sr ratios range between 0.7035 and0.7042. Initial ~(206)Pb/~(204)Pb, ~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb values fall in the ranges of 17.23-17.91,15.45-15.54 and 37.54-38.09 respectively. These characteristics are collectively similar to the Heishan intrusion and the Early Carboniferous subduction related volcanic rocks in the Santanghu Basin, North Tianshan and Beishan area. The low(La/Gd)_(PM) values between 0.26 and 1.77 indicate that the magma of the Sidingheishan intrusion was most likely derived from a depleted spinel-peridotite mantle.(Th/Nb)_(PM)ratios from 0.59 to 20.25 indicate contamination of the parental magma in the upper crust.Crystallization modeling methods suggest that the parental magma of the Sidingheishan intrusion was generated by flush melting of the asthenosphere and subsequently there was about 10 vol%contamination from a granitic melt. This was followed by about 5 vol% assimilation of upper crustal rocks. Thus, the high-Mg basaltic parental magma of Sidingheishan intrusion is interpreted to have formed from partial melting of the asthenosphere during the break-off of a subducted slab.