Authigenic iron oxide formation in the estuarine mixing zone of the Yangtze River

Estuaries are elementary geochemical fronts where river water and seawater mix. Within this mixing zone, iron and other non-conservative elements can undergo complex reactions to form new solid phases. In order to understand authigenic iron oxide formation in the Yangtze River Estuary, two onsite water-mixing sets of experiments were conducted, one by mixing variable amounts of unfiltered Yangtze River water with filtered East China Sea water of different salinity (set 1), the other by mixing variable amounts of filtered Yangtze River water with filtered East China Sea water of different salinity (set 2). In set 2, the minerals newly formed in the course of mixing were investigated by means of a scanning electron microscope fitted with an energy-dispersive X-ray analytical system. It was found that ferrihydrite and lepidocrocite were formed in these mixing experiments, coexisting in nearly equal amounts. These iron oxides appear as aggregated particles with a large grain-size range of several microns to more than 100 μm. The electrolytic properties of seawater played an important role in the formation of these authigenic iron oxides. Kaolinite and organic aggregates were also found in the experimentally mixed pre-filtered waters. Amounts of newly formed suspended matter (set 2) were one to three orders of magnitude lower than those of total suspended matter (TSM) (set 1). This implies that newly formed minerals represent only a very small proportion of TSM in the estuarine mixing zone of the Yangtze River.     

Processing of high-frequency multibeam echo sounder data for seafloor characterization

Processing simultaneous bathymetry and backscatter data, multibeam echosounders (MBESs) show promising abilities for remote seafloor characterization. High-frequency MBESs provide a good horizontal resolution, making it possible to distinguish fine details at the water-seafloor interface. However, in order to accurately measure the seafloor influence on the backscattered energy, the recorded sonar data must first be processed and cleared of various artifacts generated by the sonar system itself. Such a preprocessing correction procedure along with the assessment of its validity limits is presented and applied to a 95-kHz MBES (Simrad EM 1000) data set. Beam pattern effects, uneven array sensitivities, and inaccurate normalization of the ensonified area are removed to make possible further quantitative analysis of the corrected backscatter images. Unlike low-frequency data where the average backscattered energy proves to be the only relevant feature for discriminating the nature of the seafloor, high-frequency MBES backscatter images exhibit visible texture patterns. This additional information involves different statistical distributions of the backscattered amplitudes obtained from various seafloor types. Non-Rayleigh statistics such as K-distributions are shown to fit correctly the skewed distributions of experimental high-frequency data. Apart from the effect of the seafloor micro-roughness, a statistical model makes clear a correlation between the amplitude statistical distributions and the signal incidence angle made available by MBES bathymetric abilities. Moreover, the model enhances the effect of the first derivative of the seafloor backscattering strength upon statistical distributions near the nadir and at high incidence angles. The whole correction and analysis process is finally applied to a Simrad EM 1000 data set.     

Catalog of equatorial coordinates and <Emphasis Type="Italic">B</Emphasis>-magnitudes of stars of the Kitab part of the FON project

The processing of the plates of the Kitab part of the FON project has been completed. In total, 1963 plates were processed. The catalog of equatorial coordinates α, δ, and B-magnitudes for 13 413268 stars and galaxies up to B ≤ 17.5 ^m for the epoch 1984.97 is compiled. The Epson Expression 10000XL scanner with a 1200 dpi scanning mode and a plate size of 30 × 30 cm or 13000 × 13000 pel was used to digitize astronegatives. Coordinates of stars and galaxies are obtained in the Tycho-2 catalog system and B-magnitudes are obtained in the photovoltaic system. The catalog internal accuracy for all objects is σ_α,δ = 0.23" and σ _B = 0.15 ^m (for stars in the range B = 5 ^m …14 ^m , errors are σ_α,δ = 0.085" and σ _B = 0.054 ^m ) for equatorial coordinates and stellar B-magnitudes, respectively. Convergence between the calculated and reference positions is σ_α,δ = 0.042", and convergence between photoelectric B-magnitudes is σ _B = 0.16 ^m . Coordinate errors with respect to the UCAC-4 catalog are σ_α,δ = 0.26" (9892697 or 73.75% of stars and galaxies were identified).     

EUV and Magnetic Activities Associated with Type-I Solar Radio Bursts

Type-I bursts (i.e. noise storms) are the earliest-known type of solar radio emission at the meter wavelength. They are believed to be excited by non-thermal energetic electrons accelerated in the corona. The underlying dynamic process and exact emission mechanism still remain unresolved. Here, with a combined analysis of extreme ultraviolet (EUV), radio and photospheric magnetic field data of unprecedented quality recorded during a type-I storm on 30 July 2011, we identify a good correlation between the radio bursts and the co-spatial EUV and magnetic activities. The EUV activities manifest themselves as three major brightening stripes above a region adjacent to a compact sunspot, while the magnetic field there presents multiple moving magnetic features (MMFs) with persistent coalescence or cancelation and a morphologically similar three-part distribution. We find that the type-I intensities are correlated with those of the EUV emissions at various wavelengths with a correlation coefficient of 0.7?–?0.8. In addition, in the region between the brightening EUV stripes and the radio sources there appear consistent dynamic motions with a series of bi-directional flows, suggesting ongoing small-scale reconnection there. Mainly based on the induced connection between the magnetic motion at the photosphere and the EUV and radio activities in the corona, we suggest that the observed type-I noise storms and the EUV brightening activities are the consequence of small-scale magnetic reconnection driven by MMFs. This is in support of the original proposal made by Bentley et al. (Solar Phys. 193, 227, 2000).     

巴黎能力建设委员会助力全球气候治理

在全球气候治理中,能力建设涉及减缓、适应等多个方面.相对于发达国家,发展中国家在应对气候变化能力方面存在更多挑战,也亟待支持.巴黎能力建设委员会(PCCB)是《联合国气候变化框架公约》(以下简称公约)下属能力建设议题唯一的常设机构.在《巴黎协定》的授权下, PCCB于2016年成立,致力于解决发展中国家在实施和加强应对...     

高光谱遥感在农作物长势监测中的应用

该研究是加拿大Saskatchewan Scott农作物轮作系统(ACS)研究的一部分.研究始于1994年,历时18 a,评价9个可耕种农作物产量系统的可靠性.由3种处理水平(organic,reduced,high)和3种作物多样性水平(low,diversified annual grains,diversified annual perennials)结合而产生的9个农作物产量系统,被用于监测和评价加拿大牧场不同处理和不同作物种植轮作下可耕种农作物的产量.在2003年生长季共收集了3次叶面积指数和光谱反射率的数据:生长季前期(6月)、生长季旺盛期(7月)、生长季后期(8月).叶面积指数是由LAI-2000植物冠层分析仪监测的,光谱测量是由覆盖了350～2500 nm波长范围共2215个波段的ADS便携式高光谱仪完成的.结果显示,光学测量可以用于监测农作物生长状况的差异.从生长季的早期到中期,光谱和叶面积指数在不同处理下有显著差异.7月中期是用遥感资料监测农作物长势的最佳季节;红光波段与近红外波段反射率的比值和基于这两个波段构造的归一化植被指数,是检测农作物长势的最佳植被指数.     

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.     

Gas generation and expulsion characteristics of Middle–Upper Triassic source rocks,eastern Kuqa Depression,Tarim Basin,China: implications for shale gas resource potential

Frontier exploration in the Kuqa Depression, western China, has identified the continuous tight-sand gas accumulation in the Lower Cretaceous and Lower Jurassic as a major unconventional gas pool. However, assessment of the shale gas resource in the Kuqa Depression is new. The shale succession in the Middle–Upper Triassic comprises the Taliqike Formation (T₃t), the Huangshanjie Formation (T₃h) and the middle–upper Karamay Formation (T_2–3k), with an average accumulated thickness of 260 m. The high-quality shale is dominated by type III kerogen with high maturity and an average original total organic carbon (TOC) of about 2.68 wt%. An improved hydrocarbon generation and expulsion model was applied to this self-contained source–reservoir system to reveal the gas generation and expulsion (intensity, efficiency and volume) characteristics of Middle–Upper Triassic source rocks. The maximum volume of shale gas in the source rocks was obtained by determining the difference between generation and expulsion volumes. The results indicate that source rocks reached the hydrocarbon expulsion threshold of 1.1% VR and the hydrocarbon generation and expulsion reached their peak at 1.0% VR and 1.28% VR, with the maximum rate of 56 mg HC/0.1% TOC and 62.8 mg HC/0.1% TOC, respectively. The volumes of gas generation and expulsion from Middle–Upper Triassic source rocks were 12.02 × 10¹² m³ and 5.98 × 10¹² m³, respectively, with the residual volume of 6.04 × 10¹² m³, giving an average gas expulsion efficiency of 44.38% and retention efficiency of 55.62%. Based on the gas generation and expulsion characteristics, the predicted shale gas potential volume is 6.04 × 10¹² m³, indicating a significant shale gas resource in the Middle–Upper Triassic in the eastern Kuqa Depression.     

Modelling of groundwater flow in heterogeneous porous media by finite element method

The HySuf‐FEM code (Hydrodynamic of Subsurface Flow by Finite Element Method) is proposed in this article in order to estimate the spatial variability of the transmissivity values of the Berrechid aquifer (Morocco). The calibration of the model is based on the hydraulic head, hydraulic conductivity and recharge. Three numerical tests are used to validate the model and verify its convergence. The first test case consists in using the steady analytical solution of the Poisson equation. In the second, the model has been compared with the hydrogeological system which is characterized by an unconfined monolayer (isotropic layer) and computed by using PMWIN‐MODFLOW software. The third test case is based on the comparison between the results of HySuf‐FEM and the multiple cell balance method in the aquifer system with natural boundaries case. Good agreement between the Hydrodynamic of Subsurface Flow, the numerical tests and the spatial distribution of the thickening of the hydrogeological system is deduced from the analysis and the interpretations of hydrogeological wells. Copyright © 2011 John Wiley & Sons, Ltd.     

Genetic and ore-forming ages of the Fe–P–(Ti) oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block,NW China

Abstract

During the past 50 years, many geological and ore-deposit investigations have led to the discovery of the Fe–P–(Ti)-oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block, northeastern Tarim Craton. In this paper, we discuss the genetic and ore-forming ages, tectonic setting, and the genesis of these deposits (Kawuliuke, Qieganbulake and Duosike). LA-ICP-MS zircon U–Pb dating yielded a weighted mean ²⁰⁶Pb/²³⁸U ages of 811?±?5?Ma, 811?±?4?Ma, and 840?±?5?Ma for Kawuliuke ore-bearing pyroxenite, Qieganbulake gabbro and Duosike ore-bearing pyroxenite, respectively. The CL images of the Kawuliuke apatite grains show core–rim structure, suggesting multi-phase crystallisation, whereas the apatite grains from Qieganbulake and Dusike deposits do not show any core–rim texture, suggesting a single-stage crystallisation. LA-ICP-MS apatite ²⁰⁷Pb-corrected U–Pb dating provided weighted mean ²⁰⁶Pb/²³⁸U ages of 814?±?21?Ma and 771?±?8?Ma for the Kawuliuke ores, and 810?±?7?Ma and 841?±?7?Ma for Qieganbulake and Duosike ores, respectively. The core–rim texture in apatite by CL imaging as well as two different ore-forming ages in the core and rim of the apatite indicate two metallogenic events for the Kawuliuke deposit. The first metallogenic period was magmatic in origin, and the second period was hydrothermal in origin. The initial ore-forming age of the Kawuliuke Fe–P–Ti mineralisation was ca 814?Ma and the second one was ca 771?Ma. On the other hand, the ore-forming ages of the Qieganbulake and Duosike deposits were ca 810?Ma and ca 841?Ma, respectively. Qieganbulake and Duosike deposits were of magmatic origin. Combined with previous geochronological data and the research on the tectonic background, we infer that the Kawuliuke, Qieganbulake and Duosike Fe–P–(Ti)-oxide deposits were formed in a subduction-related tectonic setting and were the product of subduction-related magmatism.