Quantitative urban climate mapping based on a geographical database: A simulation approach using Hong Kong as a case study

The urban environment has been dramatically changed by artificial constructions. How the modified urban geometry affects the urban climate and therefore human thermal comfort has become a primary concern for urban planners. The present study takes a simulation approach to analyze the influence of urban geometry on the urban climate and maps this climatic understanding from a quantitative perspective. A geographical building database is used to characterize two widely discussed aspects: urban heat island effect (UHI) and wind dynamics. The parameters of the sky view factor (SVF) and the frontal area density (FAD) are simulated using ArcGIS-embedded computer programs to link urban geometry with the UHI and wind dynamic conditions. The simulated results are synergized and classified to evaluate different urban climatic conditions based on thermal comfort consideration. A climatic map is then generated implementing the classification. The climatic map shows reasonable agreement with thermal comfort understanding, as indicated by the biometeorological index of the physiological equivalent temperature (PET) obtained in an earlier study. The proposed climate mapping approach can provide both quantitative and visual evaluation of the urban environment for urban planners with climatic concerns. The map could be used as a decision support tool in planning and policy-making processes. An urban area in Hong Kong is used as a case study.     

Tectono‐sedimentary evolution of the western Corinth rift (Central Greece)

The Corinth rift (Greece) is one of the world's most active rifts. The early Plio‐Pleistocene rift is preserved in the northern Peloponnese peninsula, south of the active Corinth rift. Although chronostratigraphic resolution is limited, new structural, stratigraphic and sedimentological data for an area >400 km² record early rift evolution in three phases separated by distinct episodes of extension rate acceleration and northward fault migration associated with major erosion. Minimum total N–S extension is estimated at 6.4–7.7 km. The earliest asymmetrical, broad rift accommodated slow extension (0.6–1 mm a^?1) over >3 Myrs and closed to the west. North‐dipping faults with throws of 1000–2200 m defined narrow blocks (4–7 km) with little footwall relief. A N‐NE flowing antecedent river system infilled significant inherited relief (Lower group). In the earliest Pleistocene, significant fluvial incision coincided with a 15 km northward rift margin migration. Extension rates increased to 2–2.5 mm a^?1. The antecedent rivers then built giant Gilbert‐type fan deltas (Middle group) north into a deepening lacustrine/marine basin. N‐dipping, basin margin faults accommodated throws <1500 m. Delta architecture records initiation, growth and death of this fault system over ca. 800 ka. In the Middle Pleistocene, the rift margin again migrated 5 km north. Extension rate increased to 3.4–4.8 mm a^?1. This transition may correspond to an unconformity in offshore lithostratigraphy. Middle group deltas were uplifted and incised as new hangingwall deltas built into the Gulf (Upper group). A final increase to present‐day extension rates (11–16 mm a^?1) probably occurred in the Holocene. Fault and fault block dimensions did not change significantly with time suggesting control by crustal rheological layering. Extension rate acceleration may be due to strain softening or to regional tectonic factors.     

The Geography of Personal Name Forms

The geographic distribution of formal and informal names is considered. Given names are variable and bearers may identify themselves with one name form or another (e.g., William, Will, Billy, Bill, W. T., “Skip”). The form of name chosen by state legislators was classified as formal or informal and the proportions of each were plotted by state. Three regions are identified by their relative use of name formality: the Northeast, where formal names are the rule, the South, centering on Arkansas, where informal names are common, and the West, also characterized by informal names. The West is divided between the Mountain and Pacific states, with large numbers of informal names and the states which they surround, which tend toward formal names. Some states, especially those of the Midwest, do not participate in this process. Indiana and South Carolina are exceptions to the general patterns. Informal names presume to create solidarity between legislators and voters. The South and West are apparently less formal than the Northeast in general, also in name usage.     

Aspects of landslide activity in the Mercantour Massif and the French Riviera, southeastern France

Landslides pose serious hazards in the Mercantour Massif and the French Riviera in southeastern France. The context for landslide development is a particularly favourable one, both in terms of the geomorphic and structural setting of this Alpine region, and of the climatic, hydrologic and seismic factors that trigger such failures. High mountain relief and steep slopes constitute a very favourable setting for failures affecting massive basement rocks and a very heterogeneous sedimentary cover whose resistance has been weakened by weathering, tectonic stresses, and cambering due to gravity. Among trigger factors, the important appears to be the precipitation regime. Rainfalls are commonly concentrated into short high-intensity downpours or into bursts of sustained falls over periods of several days, leading to soil saturation and lubrication of potential failure planes. Snowmelt also contributes to these lubrication processes. Earthquakes affecting this region are also a potentially important landslide trigger. However, while a lot of work has been done on the relationship between extreme climatic events and landslide activity, much less is known of the trigger effects of earthquakes.Both the background factors that promote landslide development and the factors that trigger such failures are discussed within a time frame of landslide development. Progressive changes in soil strength due to weathering, rock cambering and shattering processes lead to long-term reduction in resistance. Superimposed on these progressive changes are episodic triggerings related to rainfall and snowmelt episodes or earthquakes. Landslides may occur as shallow, low-volume “one-time” events or may be part of a progressive long-term failure. The former generally affect unconsolidated or clay-rich sedimentary rocks, especially on the coastal hillslopes of the French Riviera. A notable exception of a major, voluminous “one-time” event was the submarine landslide of the Var Delta in 1979. This landslide, like numerous other smaller subaerial landslides onland, was largely a result of human activities. This landslide occurred following extensive modification of the Var Delta and, notably, reclamation of the steep, fine-grained delta front. Deforestation, quarrying, urbanisation and road network developments are various ways in which human activity has destabilized the coastal hillslopes, favouring the development of numerous shallow landslides following each episode of heavy rainfall.Progressive landslides on the upper hillslopes of the Mercantour Massif have developed over long time spans (order of 10¹ to 10⁵ yrs) and have involved more complex interactions between lithological controls, slope characteristics and trigger factors. The Collelongue and Bois de Malbosc landslides have evolved into now stable failures buttressed by resistant migmatitic diorites or amphibolites. The more voluminous and well monitored Clapière landslide is a relatively simple rotational landslide of the toe-failure type. This active landslide poses a serious to inhabitants and infrastructure in the Tinée Valley. The importance of continued field monitoring, modelling and mapping of landslides and their hazards is emphasised.     

Sources of Sediment in Lake Pepin on the Upper Mississippi River in Response to Holocene Climatic Changes

Sediments from Lake Pepin on the Mississippi River, southeastern Minnesota, are used as provenance tracers to assess variations in hydrology and sediment-transport during the middle Holocene. Three rivers contribute sediment to Lake Pepin, and each catchment is characterized by a distinctly different geologic terrain. The geochemical fingerprint for each drainage basin was determined from the elemental composition of heavy minerals in the silt-sized fraction of modern sediment samples. Down-core elemental abundances were compared with these fingerprints by use of a chemical-mass-balance model that apportions sediment to the source areas. We observed a decreased contribution from the Minnesota River during the interval ~6700–5500 ¹⁴C yr BP, which we attribute to decreased discharge of the Minnesota River, likely controlled by a combination of precipitation, snow melt, and groundwater input to the river. This hydrologic condition coincides with the mid-Holocene prairie period recorded by fossil pollen data. The occurrence of this feature in a proxy record for hydrologic variations supports the hypothesis that the mid-Holocene prairie period reflects drier conditions than before or after in midwestern North America.     

Effects of large organic material on channel form and fluvial processes

Stream channel development in forested areas is profoundly influenced by large organic debris (logs, limbs and rootwads greater than 10 cm in diameter) in the channels. In low gradient meandering streams large organic debris enters the channel through bank erosion, mass wasting, blowdown, and collapse of trees due to ice loading. In small streams large organic debris may locally influence channel morphology and sediment transport processes because the stream may not have the competency to redistribute the debris. In larger streams flowing water may move large organic debris, concentrating it into distinct accumulations (debris jams). Organic debris may greatly affect channel form and process by: increasing or decreasing stability of stream banks; influencing development of midchannel bars and short braided reaches; and facilitating, with other favourable circumstances, development of meander cutoffs. In steep gradient mountain streams organic debris may enter the channel by all the processes mentioned for low gradient streams. In addition, considerable debris may also enter the channel by way of debris avalanches or debris torrents. In small to intermediate size mountain streams with steep valley walls and little or no floodplain or flat valley floor, the effects of large organic debris on the fluvial processes and channel form may be very significant. Debris jams may locally accelerate or retard channel bed and bank erosion and/or deposition; create sites for significant sediment storage; and produce a stepped channel profile, herein referred to as ‘organic stepping’, which provides for variable channel morphology and flow conditions. The effect of live or dead trees anchored by rootwads into the stream bank may not only greatly retard bank erosion but also influence channel width and the development of small scour holes along the channel beneath tree roots. Once trees fall into the stream, their influence on the channel form and process may be quite different than when they were defending the banks, and, depending on the size of the debris, size of the stream, and many other factors, their effects range from insignificant to very important.     

Smithsonian Institution’s Global Volcanism Network

Information included in this summary is based on more detailed reports published in the Bulletin of the Global Volcanism Network, vol. 32, no. 9, September 2007 (on the Internet at ). Edited by scientists at the Smithsonian, this bulletin includes reports provided by a worldwide network of correspondents. The reports contain the names and contact information for all sources. Please note that these reports are preliminary and subject to change as events are studied in more detail. The Global Volcanism Program welcomes further reports of current volcanism, seismic unrest, monitoring data, and field observations.     

Recycling in the Puerto Rican mantle wedge, Greater Antilles Island Arc

Abstract The initial volcanic phase of Cretaceous island arc strata in central Puerto Rico, at the eastern end of the extinct Greater Antilles Arc, comprises a 6‐km thick pile of lava and volcanic breccia (Río Majada Group). Preserved within the sequence is a conspicuous shift in absolute abundances of the more incompatible elements, including Th, Nb, and the light rare earth elements (LREE: La, Ce, Pr and Nd). The compositional shift is marked by a decrease in La/Sm from averages of 2.11 in the lowest third of the pile (Formation A) to 1.48 at the top (Formation C), and by a distinctive flattening of LREE segments of chondrite‐normalized REE patterns. i⁸⁷Sr/⁸⁶Sr and ?_Nd average about 0.7035 and 8.2, respectively, in early Formation A basalts. These ranges normally overlap samples from later Formations B and C. Isotope compositions of the latter group are more variable, however, and several samples are considerably more radiogenic than Formation A basalts, such that i⁸⁷Sr/⁸⁶Sr averages almost 0.7042 while ?_Nd‐values decrease to 7.5 in Formation B and C basalts. Theoretical models of non‐modal melting processes in both amphibole peridotite and spinel lherzolite sources provide insight into the origin of depleted Th, Nb, and LREE abundances in Puerto Rican basalts. Low Nb concentrations less than normal mid‐oceanic ridge basalts in Formation A basalts indicate the wedge was slightly depleted by low‐volume decompression fusion due to induced convection in the back‐arc region prior to entry of the source into the arc melting zone. However, depleted patterns in Formation C basalts cannot be generated by relatively greater degrees of decompression fusion in the back‐arc, because addition of the La‐enriched slab‐derived component to more depleted source material invariably produces elevated rather than decreased La/Sm. Refluxing of Formation A harzburgitic residua is similarly precluded. In contrast, the observed patterns are readily reproduced by multistage melting models involving hybridized sources containing normal Formation A lherzolite source material blended with recycled, unrefluxed harzburgite residua. Successful models require hybrid sources containing large volumes of recycled harzburgite (up to 50%) during generation of Formation C basalts. Slightly elevated radiometric Sr and Nd isotopes in a few flows from Formation C are attributed to partial refluxing of the hybrid sources within the wedge.     

CO2‐warming,rising sea‐level and retreating coasts: review and critique

A CO₂‐warming atmospheric scenario, whereby increased concentrations of ‘greenhouse’ gases result in higher temperatures that either melt near‐polar ice or cause thermal expansion of ocean waters, thus leading to increased sea‐levels and exacerbated coastal erosion, assumes fundamental but unproven cause‐and‐effect relationships. General circulation models have reinforced claims of an accelerated warming and indirectly given support to the complete scenario, but ignore the point that global climate and not just air temperatures have changed over the past century. Indeed, it is difficult to prove that air temperatures have warmed naturally outside of urban centres over this period. To attribute recent temperature increases to anthropogenic factors and to extrapolate these trends to the future also ignores the historic variability of climate. What is more, an eustatic rise in sea‐level cannot be discerned from the background noise of technically or climatically induced changes. Even if sea‐level was rising, coastal erosion may be accounted for better by a suite of inter‐related climatic factors including changes in rainfall regimes, hemispheric circulation and storminess.     

Modeling forced pool–riffle hydraulics in a boulder-bed stream, southern California

The mechanisms which control the formation and maintenance of pool–riffles are fundamental aspects of channel form and process. Most of the previous investigations on pool–riffle sequences have focused on alluvial rivers, and relatively few exist on the maintenance of these bedforms in boulder-bed channels. Here, we use a high-resolution two-dimensional flow model to investigate the interactions among large roughness elements, channel hydraulics, and the maintenance of a forced pool–riffle sequence in a boulder-bed stream. Model output indicates that at low discharge, a peak zone of shear stress and velocity occurs over the riffle. At or near bankfull discharge, the peak in velocity and shear stress is found at the pool head because of strong flow convergence created by large roughness elements. The strength of flow convergence is enhanced during model simulations of bankfull flow, resulting in a narrow, high velocity core that is translated through the pool head and pool center. The jet is strengthened by a backwater effect upstream of the constriction and the development of an eddy zone on the lee side of the boulder. The extent of flow convergence and divergence is quantified by identifying the effective width, defined here as the width which conveys 90% of the highest modeled velocities. At low flow, the ratio of effective width between the pool and riffle is roughly 1:1, indicating little flow convergence or divergence. At bankfull discharge, the ratio of effective width is approximately 1:3 between the pool and downstream riffle, illustrating the strong flow convergence at the pool head. The effective width tends to equalize again with a ratio of 1:1 between the pool and riffle during a modeled discharge of a five-year flood, as the large roughness elements above the pool become drowned out. Results suggest that forced pool–riffle sequences in boulder-bed streams are maintained by flows at or near bankfull discharge because of stage-dependent variability in depth-averaged velocity and tractive force.