Mine Overburden Dump Failure: A Case Study

In any open cast mine, the management of stripped spoil during mining is crucial to the mine’s successful operation. The improper management of the overburden (OB) dump can result in stability issues which may affect safety and production of the mine. Various literatures have reported the failure of open pit dumps and the consequences in loss of life, production and impact on neighbouring amenities. Recently, the failure of an out-of-pit OB dump at an Indian Colliery was reported. The failed OB dump displaced spoil approximately 70 m from the original location of the dump toe and impacted on neighbouring amenities. This paper back analyse material properties and investigates the probable mechanism of this OB failure. Well established tools including limiting equilibrium and continuum numerical methods have been used to understand and identify the failure kinematics of this dump. It has been found that the residual friction angle of the material comprising the dump structural unit dominates stability. Mobilisation of residual strength can occur by operational induced strains and/or the presence of water. The shear strength of the foundation was fully mobilised and provided a slip surface for the overlying dump material. The resultant failure is manifest as a bilinear wedge movement of two ridged blocks defined by linear rupture planes.     

Average anisotropy characteristics of high energy cosmic ray particles and geomagnetic disturbance index Ap

The average characteristics of the diurnal and semi-diurnal anisotropy of cosmic ray intensity at relativistic energies have been obtained by using data from the worldwide grid of neutron monitor for the period 1989 to 1996. The complex behaviour of the diurnal amplitudes and time of maxima (phase) and its association with the Ap index on a long-term and day-to-day basis have been studied. Even though the general characteristics, on a yearly average basis, have not changed significantly during this period, both the diurnal and semi-diurnal amplitudes and phases vary significantly, besides significant changes being observed for different interplanetary conditions on a short-term basis. It is found that the relationship between the Ap index and the diurnal vector is out of phase during the period 1991 to 1995. On a long-term basis, the correlation of diurnal variation with Ap index has been found to vary during the solar cycle. On a short-term basis, it has been observed that the high Ap days are usually associated with higher amplitudes with phase shifted to earlier hours.     

High-Speed Solar wind Streams and Cosmic-Ray Intensity Variations During 1991–1996

High-speed plasma streams identified in the solar wind measurements can be separated into two categories: coronal-hole-associated streams and flare-generated streams. Effects of these plasma streams on cosmic-ray intensity are studied for the period of 1991–1996. It is investigated that both of these high-speed solar wind plasma streams (CS and FGS) are found equally effective in producing the cosmic-ray intensity decrease on short-term basis.     

Major and trace element geochemistry of olivine from an ENE-trending picrite dyke,genetically linked to the ca. 1.89–1.88 Ga Hampi swarm,western Dharwar craton: Implications for plume induced melting of a mixed peridotite-pyroxenite source

The presence of recycled crust in the lithospheric mantle of the Dharwar craton has been investigated using trace element geochemistry of olivine grains from an ENE-trending Paleoproterozoic picrite dyke (associated with the ca. 1.89–1.88 Ga Hampi dyke swarm) emplaced in the western Dharwar craton. Olivine grains are purely magmatic, formed as early phenocrysts in a fractionated basaltic melt. They exhibit enrichment in NiO contents (0.32–0.43 wt%) and depletion in Ca (1366–2105 ppm), Mn (1578–2663 ppm) and 100 1 Mn/Fe (1.28–1.48). Further, the compiled whole-rock geochemical data of the picrite dyke and associated dyke swarm illustrates relatively low CaO/MgO (0.55–1.78), intermediate FeO/MnO (47–54), negative to positive PX# (?0.34 to +1.86), and high values of FC3MS (0.24–0.90) and FCKANTMS (0.19–1.11). These chemical markers are not consistent with the derivation of the primary melt from a pure peridotite or a pyroxenite source; therefore, contribution from a mixed type of source having both peridotite and pyroxenite end members (pyroxene rich and olivine poor lithology) is suggested. The amount of pyroxenite and recycled crust varies from 46% to 86% and 14% to 44%, respectively. The Al-in-olivine based thermometer estimates the maximum crystallization temperature as 1407 °C, which is 137 °C higher than the average temperature of MORB and accordant with several well-established plume-induced large igneous provinces (LIPs) worldwide. Therefore, it is suggested that the studied picrite dyke is derived from a primary melt generated by plume-induced melting of a peridotite-pyroxenite mixed source. The ca. 1.89–1.88 Ga Hampi dyke swarm, being genetically linked with the studied dyke, could also be derived from this same source. Further, the recycled crust in the subcontinental lithospheric mantle of the western Dharwar craton may have generated the pyroxene rich mafic source during the Neoarchean convergence between eastern and western Dharwar craton.     

Chrome-diopside Megacryst-bearing Lamprophyre from the Late Cretaceous Mundwara Alkaline Complex,NW India: Petrological and Geodynamic Implications

The occurrence of a rare mantle-derived chrome-diopside megacryst (～8 mm), containing inclusions of olivine, in a lamprophyre dyke from the late Cretaceous polychronous (～100 – 68 Ma) Mundwara alkaline complex of NW India is reported. The olivine inclusions are forsteritic (Fo: 85.23) in composition, and their NiO (0.09 wt%) and CaO (0.13 wt%) contents imply derivation from a peridotitic mantle source. The composition of the chrome diopside (Cr₂O₃: 0.93 wt ) (Wo_45.27 En_48.47 Fs_5.07 and Ac_1.18) megacryst is comparable to that occurring in the garnet peridotite xenoliths found in diamondiferous kimberlites from Archaean cratons. Single pyroxene thermobarometry revealed that this chrome diopside megacryst was derived from a depth range of ～100 km, which is relatively much deeper than that of the chrome-diopside megacrysts (～40–50 km) reported in spinellherzolite xenoliths from the alkali basalts of Deccan age (ca. 66–67 Ma) from the Kutch, NW India. This study highlights that pre- Deccan lithosphere, below the Mundwara alkaline complex, was at least ～100 km thick and, likely, similar in composition to that of the cratonic lithosphere.     

An Experimental Study of Compaction Grouting on Its Densification and Confining Effects

Compaction grouting (CPG) involves the injection of high viscosity mortar-type grout under relatively high pressure that displaces and compacts the soil in-place. Many case studies around the world prove the effectiveness of CPG to treat liquefiable soils. In these studies, mostly CPG has been developed and used on the basis of practical experiences, its densification and confining effects are not well understood until now. The objective of the present study is to bring out densification and confining effects of CPG. This paper presents a laboratory experimental study carried out to model a CPG treated ground. The study includes the experiments performed to decide appropriate consistency of grout material and appropriate relative contribution of factors such as overburden pressure, grout volume, injection speed and injection pressure that ensures efficient grouting. The effects of CPG are quantified in terms of lateral earth pressures and lateral displacements that are further defined in terms of coefficient of lateral earth pressure, K, and densification factor in the soil around grout column. This leads to a better understanding of its densification and confining effects. Although in practice, majority of the works with CPG have been related to its densification effect and lesser attention has been given to its confinement effect, in present experimental study, its confinement effect were prominent. Also at the farthest locations usually where field tests are carried out, its densification effect could not be found experimentally but its confinement effect was clear.     

Multivariate statistical analysis approach for prediction of blast-induced ground vibration

Excavation of coal, overburden, and mineral deposits by blasting is dominant over the globe to date, although there are certain undesirable effects of blasting which need to be controlled. Blast-induced vibration is one of the major concerns for blast designers as it may lead to structural damage. The empirical method for prediction of blast-induced vibration has been adopted by many researchers in the form of predictor equations. Predictor equations are site specific and indirectly related to physicomechanical and geological properties of rock mass as blast-induced ground vibration is a function of various controllable and uncontrollable parameters. Rock parameters for blasting face and propagation media for blast vibration waves are uncontrollable parameters, whereas blast design parameters like hole diameter, hole depth, column length of explosive charge, total number of blast holes, burden, spacing, explosive charge per delay, total explosive charge in a blasting round, and initiation system are controllable parameters. Optimization of blast design parameters is based on site condition and availability of equipment. Most of the smaller mines have predesigned blasting parameters except explosive charge per delay, total explosive charge, and distance of blast face from surface structures. However, larger opencast mines have variations in blast design parameters for different benches based on strata condition: Multivariate predictor equation is necessary in such case. This paper deals with a case study to establish multivariate predictor equation for Moher and Moher Amlohri Extension opencast mine of India. The multivariate statistical regression approach to establish linear and logarithmic scale relation between variables to predict peak particle velocity (PPV) has been used for this purpose. Blast design has been proposed based on established multivariate regression equation to optimize blast design parameters keeping PPV within legislative limits.     

Residual-state creep behavior of typical clayey soils

There are few places in the world to monitor aseismic creep. One of them is the Ismetpasa segment of the North Anatolian Fault. The observations in the Ismetpasa showed that the creep rate progressively decreased along the 40 years before the 1999 Kocaeli-Golcuk (Mw = 7.6) earthquake and then started increasing. This phenomenon might be a systematic of the creeping segments. If it is the case, this behavior can be utilized for early warning before the expected major earthquake in the Marmara Sea. In this study, the creep rate of the segment has been studied by GPS and InSAR technologies. The results showed that the rate has decreased to 1.3 cm a year. This result might be an indication of stress starting increase. If the segment retains the decreasing trend and it is ceased by a major earthquake, it would be a proof of the relationship between the creep process and the earthquakes. Then, the creep process might be utilized for early warning.