深圳市大气210Pb的活度浓度、沉降通量和沉积速率研究

2017年1月至12月,研究分析了深圳市大气气溶胶中210Pb的活度浓度、沉降通量和沉积速率.结果表明,深圳市大气210Pb比活度范围为0.59～4.72 mBq/m3(平均值为1.58 mBq/m3);沉降通量范围为0.45～1.31 Bq/(m2·d)(平均值为0.74 Bq/(m2·d));沉积速率范围为0.09...     

基于陆海统筹的海岸带空间功能分区——以宁波市为例

海岸带空间功能分区是优化海岸带开发与保护的基础性工作,在国土空间规划体系中具有重要作用。当前我国海陆功能分区在分区层级、分区方法等方面并不一致,导致海岸带保护与开发利用失衡。本文在梳理国内外海岸带空间功能分区研究的基础上,从陆海统筹角度出发,构建海岸带空间功能分区体系,并以宁波市为例进行验证,在优先划定生态保护区基础上,对海陆空间进行适宜性评价,根据评价结果确定功能分区。结果表明：（1）宁波市海岸带功能区中生态保护区面积占比约为60%,海陆一体发展区占比约为22.3%,海洋发展区占比约为12.5%,陆地发展区占比约为5.2%;(2)宁波市开发利用功能区空间分布与以临港产业、海洋服务业和海洋渔业为基础的海洋经济发展导向相符。海岸带空间功能分区要以生态保护为底线,以优化空间布局为导向,为优化海岸带开发与保护提供有力支撑。     

油气包裹体在油气地质研究中的应用--概念、分类、形成机制及研究意义

油气包裹体己成为油气成藏研究的有力工具,在划分油气运移充注期次、确定油气藏的形成时间、反映油气的成熟度及来源等方面均有重要的应用价值。近年来,利用油气包裹体及其共生的盐水溶液包裹体估算油气藏形成时的pVT条件是油气包裹体研究中的一个新热点,它为更准确地计算油气藏形成的温度一压力条件提供了一种独立的、更准确的技术手段。研究表明,包裹体岩相学和流体体系的热力学研究仍将是今后的发展重点。油气包裹体的pVT模拟技术尚处于初始阶段,两种软件（VTFlinc和FIT）的准确性和精确性虽有待进一步提高,但已经成为今后一个重要的发展方向。     

Single Zircon LA-ICP-MS U-Pb Dating of the Guandimiao and Wawutang Granitic Plutons in Hunan, South China and Its Petrogenetic Significance

1 Introduction The South China Block (SCB), located between the Qinling-Dabie and Songma Indosinian sutures, experienced successively two important tectonic movements during the Mesozoic, i.e. the Indosinian movement (early Mesozoic) and the Yanshanian movement (late Mesozoic). Therefore, the generally accepted viewpoint is that the key geological problems during the Mesozoic are essentially the dynamics and material expression of these two tectonic movements in South China (Chen et al.…     

基于神经网络的滑移隔震结构智能半主动控制

考虑上部结构的刚度和阻尼,使用神经网络控制算法计算基底摩擦力的大小,研究了滑移隔震结构的半主动控制。对计算实例的分析表明,通过半主动控制的滑移隔震结构不但具有较好的隔震效果,且能有效地减小基底的最大滑移量及残余位移。为对比各种控制方法的控制效果,文中还利用Bang-Bang控制和瞬时最优控制算法对滑移隔震结构进行了半主动控制。对比分析表明,基于神经网络控制算法的控制效果优于其它控制算法,具有反馈量少,稳健性强等特点。     

基于轨迹偏移算法的居民就医时空特征与空间格局分析

居民就医时空特征与空间格局反映了医疗设施的服务能力与布局合理性.本文以厦门岛为例,采用出租车轨迹数据,探讨了居民就医的时空特征和空间格局.论文提出了基于道路中心线的研究单元划分方法;提出OD轨迹偏移算法,更精细地提取出三级医院的就医OD数据,改善传统的缓冲区分析法中精确度较低的问题;对居民就医行为进行时空特征分析;基于...     

五酸溶样-电感耦合等离子体质谱法同时测定地质样品中的稀土等28种金属元素

电感耦合等离子体质谱法(ICP-MS)测定大批量地质样品中的稀土和钴铪铟锰铌钽铊铬镉镓锗钒锡等金属元素,主要采用三酸或四酸溶解样品.由于地质样品组分复杂,稀土等金属元素含量低,各元素性质差异大,三酸或四酸溶样经常出现易挥发元素如钒铬镉镓锡的测定结果不稳定、镧铈镨钕等稀土元素溶解不完全的问题.本文在盐酸-硝酸-氢氟酸-高...     

Investigation of highly efficient algorithms for solving linear equations in the discontinuous deformation analysis method

Large‐scale engineering computing using the discontinuous deformation analysis (DDA) method is time‐consuming, which hinders the application of the DDA method. The simulation result of a typical numerical example indicates that the linear equation solver is a key factor that affects the efficiency of the DDA method. In this paper, highly efficient algorithms for solving linear equations are investigated, and two modifications of the DDA programme are presented. The first modification is a linear equation solver with high efficiency. The block Jacobi (BJ) iterative method and the block conjugate gradient with Jacobi pre‐processing (Jacobi‐PCG) iterative method are introduced, and the key operations are detailed, including the matrix‐vector product and the diagonal matrix inversion. Another modification consists of a parallel linear equation solver, which is separately constructed based on the multi‐thread and CPU‐GPU heterogeneous platforms with OpenMP and CUDA, respectively. The simulation results from several numerical examples using the modified DDA programme demonstrate that the Jacobi‐PCG is a better iterative method for large‐scale engineering computing and that adoptive parallel strategies can greatly enhance computational efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

Parallelization of the distinct lattice spring model

The distinct lattice spring model (DLSM) is a newly developed numerical tool for modeling rock dynamics problems, i.e. dynamic failure and wave propagation. In this paper, parallelization of DLSM is presented. With the development of parallel computing technologies in both hardware and software, parallelization of a code is becoming easier than before. There are many available choices now. In this paper, Open Multi‐Processing (OpenMP) with multicore personal computer (PC) and message passing interface (MPI) with cluster are selected as the environments to parallelize DLSM. Performances of these parallel DLSM codes are tested on different computers. It is found that the parallel DLSM code with OpenMP can reach a maximum speed‐up of 4.68× on a quad‐core PC. The parallel DLSM code with MPI can achieve a speed‐up of 40.886× when 256 CPUs are used on a cluster. At the end of this paper, a high‐resolution model with four million particles, which is too big to handle by the serial code, is simulated by using the parallel DLSM code on a cluster. It is concluded that the parallelization of DLSM is successful. Copyright © 2011 John Wiley & Sons, Ltd.     

我国多雨季和少雨季的一些统计特征

通过对我国31年124季降水距平图的分析发现1.全国性的特多(少)雨季中,在高原东侧(95—105°E间)总有一少(多)雨带出现。2.多(少)雨季之后仍为多(少)雨季的持续性以春一夏最好,秋冬最差。3.一年中出现多雨季的次数与黑潮海温和西太平洋副高强度呈正相关。