Walrus foraging marks on the seafloor in Bristol Bay, Alaska: a reconnaissance survey

A reconnaissance sidescan sonar survey in Bristol Bay, Alaska revealed extensive areas of seafloor with features related to walrus foraging. They are similar to those seen in areas such as the outer Bering Sea and Chukchi Sea. Two types of feature were observed: (a) small (≪1 m diameter) shallow pits, often in clusters ranging in density from 5 pits per hectare to 35 pits per hectare; and, (b) more abundant, narrow, sinuous furrows, typically 5 to 10 m long with some reaching 20 m or more. Most foraging marks were in less than 60 m water depth in areas of sandy seafloor that were smooth, hummocky or characterized by degraded bedforms; the absence of foraging marks in other areas may be related, in part, to their more dynamic nature. The distribution of foraging marks was consistent in a general way with walrus locations from satellite telemetry studies.     

Short-term changes in sedimentological and hydrographic characteristics over a sandy intertidal zone,the Wash,U. K.

Observations of tidal current velocities, their structure throughout the water column and associated sediment distribution patterns were made in 1972 and 1980. The results demonstrated: 1. an increase in the tidal current speeds and an enhancement in the longshore component; 2. a trend toward a more logarithmic velocity distribution in the water column; and 3. a general increase in grain size, but the development of alower mud flat. Such significant changes could relate to the construction of an embankment, as part of a land reclamation scheme, or to the reversion to a longer-term period of erosion over this region of intertidal flat.     

Characterization of multiple functional groups on kaolinite

Multiple proton functional group conditional binding constants (K′_i) and their concentrations (C_i) are determined from detailed acid/base titration data. The C-K′ information is obtained for kaolinite by assuming that the distribution can be approximated by cumulative independent mono protic groups. Linear programming optimization techniques are used to Fit the data. In addition, the electrode calibration is optimized in the data fit. This adjustment is important for high and low pHs. Discrete concentration dependent pXs of about 3.4, 4.5, 6.7 and 9.8 are determined for a reference kaolinite. These correspond reasonably well to designations made by Wehrli et al. (1990, Aquatic Sciences, Vol. 52, pp. 1–31 ) to A10H2 and AlOH proton reactions at edge and surface sites and to silanol exchange. There is an ionic strength effect for one site. Long and short reaction times and reversibility affect the results.     

Identification and dispersion of the campanian ash layer (Y-5) in the sediments of the Eastern Mediterranean

Sedimentological, mineralogical, optical, and geochemical analyses were used to identify pyroclastic material contained within gravity and piston cores recovered from the northwestern Aegean and Gulf of Corinth areas of the eastern Mediterranean Sea. The lithological, optical, and elemental signatures of the tephra suggest that the material originated from the Campanian Province of Italy, and is known as the Campanian Ash Layer or Y-5. The identification of the Y-5 layer in these two previously unreported areas extend the distribution of this stratigraphic marker and increases the quantitative estimates of pyroclastic material volume. In addition, our knowledge of sedimentary processes active within these two areas is extended.     

Late Quaternary evolution of coral reefs on a cool-water carbonate margin: the Abrolhos Carbonate Platforms, southwest Australia

Late Quaternary coral reefs have developed on the southwestern Australian margin, which has otherwise been characterised by cool-water carbonates since the Eocene. The Houtman Abrolhos coral reefs are at the limits of existence, extending, with the assistance of the Leeuwin Current, a poleward-flowing, warm water stream, into a region dominated by more temperate communities. Coring in the Easter Group reefs, supported by high precision dating, by both U/Th TIMS and ¹⁴C methods, has shown vigorous coral growth, with reefs over 26 m thick in the Holocene and over 15 m thick in the Last Interglacial. Each of the three Abrolhos platforms consists of a central platform composed of Last Interglacial reefs, about which windward and leeward Holocene reefs developed asymmetrically. Reef, peritidal and eolian facies comprise the emergent Last Interglacial limestones which are extensively calcretized, with reef facies up to 5 m above MSL. The Last Interglacial high stand lasted for at least 10 ka from 130 to 120 ka, and possibly 15 ka, from 132 to 117 ka. Holocene reef facies are also emergent by 0.5 m, and are overlain by peritidal and storm ridge facies in an upward-shallowing sequence. Windward (10 m thick) and leeward (26 m thick) Holocene reefs in the Easter Group show contrasting lithofacies. The wave-exposed windward reefs consist of a slow-growing association of coralline algal bindstones and coral framestones, whereas fast-growing coral framestones dominate the more protected leeward reefs. The leeward reefs commenced growth 10,000 years ago and grew to the present sea level by 6500 years ago, generating Holocene constructional topography consisting of ‘blue-hole’ terrain in the leeward parts of the platforms.     

Net Sand Transport Direction in a Tidal Inlet, using Foraminiferal Tests as Natural Tracers

The relationship between the flux of exotic benthic foraminiferal tests (i.e. tests which are supplied from open-sea sources alone) in a tidal inlet and that of bulk sediment was analysed, which can be expressed as two first-order linear equations. According to this relationship, in order to determine net sediment transport directions in the entrance, the test concentration in surficial sediments of the tidal basin can be compared against a ‘ critical level ’. The critical level is determined for the conditions that no net transport of bulk sediment is present within the entrance. If the observed concentration (averaged over the tidal basin) is higher than the simulated critical level, then the net sediment transport is directed to landward. This method is applied to the analysis of net sand transport at Christchurch Harbour, a tidal inlet system located in southern England. In this investigation, concentrations of exotic foraminiferal tests in the surficial sediments of the tidal basin and ebb tidal delta area were obtained from the analysis of sea-bed sediment samples. A series of probable critical levels were calculated based upon the data sets with regard to: (1) sediment discharge from the rivers; (2) magnitude of sediment discharge within the entrance during the ebb; (3) the test concentration outside the harbour; (4) the thickness of the moving layer; and (5) two parameters associated with dispersive processes. The results show that the concentration in the tidal basin sediment is higher than a number of simulated critical concentrations for representative cases. Consequently, the high level of the concentration of exotic benthic foraminiferal tests within the harbour should be explained as a result of landward net transport of sands within the entrance.     

The spectral variation of the sensitivity of a polythene shielded net radiometer

Summary Polythene shielded net radiometers have a higher sensitivity to short wave than to long wave radiation. This is shown to be mainly due to the spectral transmissivity of the thin polythene film used for the windshields.     

Testing Nano-Powder and Fused-Glass Mineral Reference Materials for In Situ Rb-Sr Dating of Glauconite,Phlogopite, Biotite and Feldspar via LA-ICP-MS/MS

Reference materials (RMs) with well-characterised composition are necessary for reliable quantification and quality control of isotopic analyses of geological samples. For in situ Rb-Sr analysis of silicate minerals via laser ablation inductively coupled plasma tandem mass spectrometry (LA-ICP-MS/MS) with a collision/reaction cell, there is a general lack of mineral-specific and matrix-matched RMs, which limits wider application of this new laser-based dating technique to certain minerals. In this work, pressed nano-powder pellets (NP) of four RMs, GL-O (glauconite), Mica-Mg (phlogopite), Mica-Fe (biotite) and FK-N (K-feldspar), were analysed and tested for in situ Rb-Sr dating, complemented by isotope dilution (ID) MC-ICP-MS Rb-Sr analyses of GL-O and Mica-Mg. In addition, we attempted to develop alternative flux-free and fused ‘mineral glasses’ from the above RMs for in situ Rb-Sr dating applications. Overall, the results of this study showed that among the above RMs only two NP (Mica-Mg-NP and GL-O-NP) were suitable and robust for in situ dating applications. These two nano-powder reference materials, Mica-Mg-NP and GL-O-NP, were thus used as primary RMs to normalise and determine Rb-Sr ages for three natural minerals: MDC phlogopite and GL-O glauconite grains, and also Mica-Fe-NP (biotite). Our in situ analyses of the above RMs yielded Rb-Sr ages that are in good agreement (within 8%) of published ages, which suggests that both Mica-Mg-NP and GL-O-NP are suitable RMs for in situ Rb-Sr dating of phlogopite, glauconite and biotite. However, using secondary RMs is recommended to monitor the quality of the obtained ages.     

Marine radar ocean wave retrieval’s dependency on range and azimuth

The strength of the surface wave signal in marine X-band radar (MR) images strongly depends on range and azimuth (i.e., the angle between antenna look and peak wave direction). Traditionally, MR wave analysis is carried out in a set of rectangular windows covering the radar field of view (FOV). The FOV is typically partially obstructed, e.g., due to the coastline or ship superstructures. Especially for ships that are subject to regular course changes, this results in an increased variability or error associated with wave parameters. Using MR measurements from R/P FLIP, acquired off California during the 2010 US Office of Naval Research (ONR) high resolution air–sea interaction (Hi-Res) experiment, this study quantifies the dependency of the radar-based 2D wave spectrum and parameters on range and azimuth. With the help of reference data from a nearby Datawell Waverider buoy, we propose empirical methods to remove the dependency and we illustrate their efficacy.