Scaling and reproducibility of craters produced at the Experimental Projectile Impact Chamber (EPIC), Centro de Astrobiología,Spain

The Experimental Projectile Impact Chamber (EPIC) is a specially designed facility for the study of processes related to wet‐target (e.g., “marine”) impacts. It consists of a 7 m wide, funnel‐shaped test bed, and a 20.5 mm caliber compressed N₂ gas gun. The target can be unconsolidated or liquid. The gas gun can launch 20 mm projectiles of various solid materials under ambient atmospheric pressure and at various angles from the horizontal. To test the functionality and quality of obtained results by EPIC, impacts were performed into dry beach sand targets with two different projectile materials; ceramic Al₂O₃ (max. velocity 290 m s^?1) and Delrin (max. velocity 410 m s^?1); 23 shots used a quarter‐space setting (19 normal, 4 at 53° from horizontal) and 14 were in a half‐space setting (13 normal, 1 at 53°). The experiments were compared with numerical simulations using the iSALE code. Differences were seen between the nondisruptive Al₂O₃ (ceramic) and the disruptive Delrin (polymer) projectiles in transient crater development. All final crater dimensions, when plotted in scaled form, agree reasonably well with the results of other studies of impacts into granular materials. We also successfully validated numerical models of vertical and oblique impacts in sand against the experimental results, as well as demonstrated that the EPIC quarter‐space experiments are a reasonable approximation for half‐space experiments. Altogether, the combined evaluation of experiments and numerical simulations support the usefulness of the EPIC in impact cratering studies.     

Causes and extent of environmental impacts of landslide hazard in the Himalayan region: a case study of Murree, Pakistan

Pakistan is located at the cross-roads of plate boundaries, experiencing multiple hazards of earthquake, flood, drought, water-logging, salinization and recurrent landslides. This paper examines the causes and environmental impacts of frequently occurring landslide hazards in the Murree area of Pakistan??s Himalayan region. These are wide ranging in nature and in terms of the damage that result. The area under research was divided into eight blocks and randomly data collected. It was observed that landslides mostly occur along the road network and disturbed slopes. Immature geology, a wide variation in climate and degradation of the natural resource-base were found to be some of the causal factors responsible for the landslide hazards. During the past three decades, rapid expansion of urban zones contributed to the changing vulnerability of the area. The analysis revealed that a large majority of the households (75%) in the area have been directly or indirectly affected by landslide hazards. Damages to already scarce agricultural land, infrastructure and other properties are each year a regular and escalating phenomenon. Landslide size, frequency and consequent costs of damage have increased considerably.     

Structure of young East Pacific Rise lithosphere from ambient noise correlation analysis of fundamental- and higher-mode Scholte-Rayleigh waves

Inter-station Green's functions estimated from ambient noise studies have been widely used to investigate crustal structure. However, most studies are restricted to continental areas and use fundamental-mode surface waves only. In this study, we recover inter-station surface (Scholte-Rayleigh) wave empirical Green's function (EGFs) of both the fundamental- and the first-higher mode using one year of continuous seismic noise records on the vertical component from 28 ocean bottom seismographs deployed in the Quebrada/Discovery/Gofar transform faults region on the East Pacific Rise. The average phase-velocity dispersion of the fundamental mode (period band 2–30 s) and the first-higher mode (period band 3–7 s) from all EGFs are used to invert for the 1-D average, shear-velocity structure in the crust and uppermost mantle using a model-space search algorithm. The preferred shear-velocity models reveal low velocities (4.29 km/s) between Moho and 25 km depth below sea-surface, suggesting the absence of a fast uppermost mantle lid in this young (0–2 Myr) oceanic region. An even more pronounced low-velocity zone, with shear velocities ～3.85 km/s, appears at a depth between 25–40 km below sea-surface. Along with previous results, our study indicates that the shear velocity in the uppermost oceanic mantle increases with increasing seafloor age, consistent with age-related lithospheric cooling.     

Fine‐grained bed sediment storage within the main channel systems of the Frome and Piddle catchments,Dorset, UK

Lowland permeable catchments in the UK are particularly prone to sedimentation problems, on account of the increased fine sediment loadings generated by recent land‐use change and their stable seasonal hydrological regimes, which are frequently depleted by groundwater abstraction. Fine‐grained sediment storage on the bed of the main channel systems of the Frome (437 km²) and Piddle (183 km²) catchments, Dorset, UK, has been examined at 29 sites using a sediment remobilization technique. Measurements encompassed the period February 2003–July 2004. At individual sites in the Frome, average values ranged between 410 and 2630 g m^?2, with an overall mean of 918 g m^?2. In the Piddle, the average values for individual sites varied between 260 and 4340 g m^?2, with an overall mean of 1580 g m^?2. Temporal variations in fine bed sediment storage at each site were appreciable, with the coefficients of variation ranging between 43 and 155% in the Frome and between 33 and 160% in the Piddle. Average reach‐scale specific bed sediment storage increased markedly downstream along each main stem from 2 to 29 t km^?1 (Frome) and from 4 to 19 t km^?1 (Piddle). Total fine sediment storage on the channel bed of the Frome varied between 479 t (5 t km^?1) and 1694 t (17 t km^?1), with a mean of 795 t (7 t km^?1), compared with between 371 t (5 t km^?1) and 1238 t (14 t km^?1) with a mean of 730 t (9 t km^?1) in the Piddle. During the study period, fine bed sediment storage was typically equivalent to 18% (Frome) and 57% (Piddle) of the mean annual suspended sediment flux at the study catchment outlets. Copyright © 2006 John Wiley & Sons, Ltd.     

The effect of the oceans on the terrestrial crater size‐frequency distribution: Insight from numerical modeling

Abstract— On Earth, oceanic impacts are twice as likely to occur as continental impacts, yet the effect of the oceans has not been previously considered when estimating the terrestrial crater size‐frequency distribution. Despite recent progress in understanding the qualitative and quantitative effect of a water layer on the impact process through novel laboratory experiments, detailed numerical modeling, and interpretation of geological and geophysical data, no definitive relationship between impactor properties, water depth, and final crater diameter exists. In this paper, we determine the relationship between final (and transient) crater diameter and the ratio of water depth to impactor diameter using the results of numerical impact models. This relationship applies for normal incidence impacts of stoney asteroids into water‐covered, crystalline oceanic crust at a velocity of 15 km s^?1. We use these relationships to construct the first estimates of terrestrial crater size‐frequency distributions (over the last 100 million years) that take into account the depth‐area distribution of oceans on Earth. We find that the oceans reduce the number of craters smaller than 1 km in diameter by about two‐thirds, the number of craters ?30 km in diameter by about one‐third, and that for craters larger than ?100 km in diameter, the oceans have little effect. Above a diameter of ?12 km, more craters occur on the ocean floor than on land; below this diameter more craters form on land than in the oceans. We also estimate that there have been in the region of 150 impact events in the last 100 million years that formed an impact‐related resurge feature, or disturbance on the seafloor, instead of a crater.     

Geoacoustic inversion using a rotated coordinate system and simulated annealing

An efficient method for geoacoustic inversions in a range-dependent ocean waveguide is implemented and tested with synthetic data. This method combines a simulated annealing search with an optimal coordinate rotation that increases the efficiency of navigating parameter landscapes for which parameter coupling is important. The coordinate rotation associated with the parameter couplings also provides information about which parameters are resolvable for a particular inversion frequency and array geometry. Using this information, results from several single-frequency inversions can be combined to obtain an estimate for the sediment parameters.     

Passage through India: the Mozambique Ocean suture,high‐pressure granulites and the Palghat‐Cauvery shear zone system

The Mozambique Ocean closed as Gondwana formed. Its suture has been identified in Madagascar (Betsimisaraka suture), but its continuation, into India, is controversial. The Palghat‐Cauvery shear system appears an ideal candidate as it: (i) lies along strike of the Betsimisaraka suture in Gondwana; (ii) forms a high‐pressure granulite belt; and (iii) separates crustal domains with different geological histories. However, existing age constraints have been used to suggest that the structure is Archaean/Palaeoproterozoic. Here we date metamorphic zircons using secondary ion mass spectrometry (535.0 ± 4.9 Ma) and monazites using electron probe micro‐analysis (537 ± 9, 532 ± 8, 525 ± 10 Ma). No evidence for an earlier metamorphic event was found. The identification of Palghat‐Cauvery high‐pressure metamorphism as Cambrian, and recognition that it bounds crustal domains of contrasting origin, points to it being the southern continuation of the Betsimisaraka suture and southern margin of Neoproterozoic India.