Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

九龙江河口区表层水铀同位素的粒级分布

利用微滤和超滤技术研究了九龙江河口区表层水中铀及其同位素组成的粒级分布和地球化学行为.结果表明,溶解态(<0.4μm)中低分子量组分(<10 000 u)占主要份额,胶体态(10 000 u~0.4μm)238U所占比例不足1%,且随盐度的增加其所占份额逐渐降低.溶解态、低分子量组分和胶体态238U的比活度与盐度之间存在良好的线性正相关关系,证实它们在九龙江河口区呈现保守行为.在颗粒态(>0.4μm)中,各粒级组分238U所占份额主要受控于相应颗粒物的浓度,在盐度小于20的区域,各粒级颗粒组分238U占颗粒态的份额有如下变化次序:10~53μm>2~10μm>0.4~2μm>大于53μm,而在盐度大于30的近外海站位,该次序发生一些变化:0.4~2μm>10~53μm>2~10μm>大于53μm,最小粒级颗粒组分238U的贡献有所增加,反映了自生铀贡献的加强.九龙江河口区表层水中溶解态(包括低分子量组分和胶体态)的234U/238U)_A.R.均大于1,显示出234U过剩的特征,而各粒级颗粒组分中的234U/238U)_A.R.则接近于平衡值(1.0).这一现象与陆地岩石风化过程中水体对铀的淋滤释出量及234U的优先浸出有关.对232Th/238U质量比的研究显示,溶解态及其所包括的低分子量组分和胶体态的232Th/238U质量比均小于1,而颗粒态及其所包括的4个粒级组分中的232Th/238U质量比均大于1,反映了向外海输送过程中铀、钍地球化学行为的差异.     

不同温度的有机溶剂分提对鯷鱼鱼油得率及脂肪酸组成的影响

讨论了不同温度的有机溶剂分级提取对鳀鱼鱼油得率、脂肪酸组成及EPA、DHA含量变化的影响。经15℃干法分级提取的液态鳀鱼鱼油,在设定的4种温度下,液态鳀鱼鱼油得率均随溶剂量的增加而提高;在相同溶剂量的情况下,随着分级提取温度的降低,液态鳀鱼鱼油得率呈下降的趋势。有机溶剂分级提取对14碳短碳链的饱和与不饱和脂肪酸及16碳、18碳的饱和脂肪酸的脱除效果是明显的,但对脱除20碳、22碳的长碳链饱和脂肪酸的效果不明显。在4种试验温度下,EPA和DHA的总量分别为29.88%、31.74%、35.27%和41.80%,高出美国阿拉斯佳深海鱼油对应总量(28.76%)的1.12%～13.04%。     

近岸溢油漂移扩散预测方法研究——以胶州湾溢油事件为例

近些年,由于中国经济的高速发展,原油需求逐年增长,同时海上溢油事故发生的风险也在加剧。海上溢油会严重破坏海洋环境,危害我国经济发展,加强溢油漂移扩散预报研究能够为海上溢油应急响应提供技术支撑。因此,国家海洋信息中心研发了海上突发事件应急一体化预测预警系统。该系统基于GIS平台研发,能够在二维电子海图基础上叠加相关的海洋环境动力要素信息,模拟溢油扩散和漂移态势,同时计算剩余油量,估算溢油面积以及岸线吸附程度等。2013年11月22日,山东黄岛发生输油管道爆炸事故,造成大量原油溢入胶州湾。本文利用该系统结合高分辨率大气模型WRF的三重嵌套技术和海流模型SELFE的非结构化网格加密技术,对事故溢油漂移扩散开展了预测工作。预测结果显示,油污受胶州湾内往复流的影响极大,72 h后,胶州湾内外大部分海域都将存在油污,主要集中在黄岛沿岸海域、团岛及浮山湾附近,预测扫海面积为70.32 km2。经海事部门高分辨率卫星观测结果印证,系统模拟的溢油分布较为合理。该系统的业务化应用为相关海上溢油污染应急工作提供了一定理论依据和参考。     

Distribution characteristics of zooplankton biomass in the East China Sea

On the basis of the data of oceanographic survey in the East China Sea in four seasons during 1997-2000 (23°30'~33°00'N, 118°30'-128°E), the variation of total biomass and diet biomass of zooplankton and their spatial-temporal distribution and relationship with the fishing ground of Engraulis japonicus are approached and analyzed. The results show that the average biomass is 65.32 mg/m3 in four seasons, autumn (86.18 mg/m3) being greater than summer (69.18 mg/m3) greater than spring (55.67 mg/m3) greater than winter (50.33 mg/m3). The average value of diet zooplankton biomass is 40.9 mg/m3. The trends of horizontal distribution both in the total biomass and the diet biomass of zooplankton are similar. The high biomass region (250-500 mg/m3) is very limited, only accounting for 1% of the investigation area. Seasonal variation of the biomass is very remarkable in the west and north parts of East China Sea coastal waters ( 29°30'N,125°E). The horizontal distribution of diet zooplankton depends on the     

我国海域分等定级指标体系研究

长期以来,海域的无偿使用导致海洋开发活动秩序混乱、海洋环境污染加剧、海洋生物资源枯竭、海洋生态环境遭到破坏,严重阻碍和制约沿海地区的可持续发展.本文试图根据经济学的“地租级差”理论和运筹学中的“层次分析法”并结合我国沿海11个省、市和自治区的社会、经济、基础设施、自然资源等因素进行理论探讨,给出了我国管辖海域的等级.为今后我国制定海域有偿使用金的征收标准奠定基础.     

南海北部含油气构造上方化探异常研究

在南海北部利用地球化学方法作为油气勘探的一种辅助手段。在6个航次中采集了沉积物、底层海水及海面大气样品，测定了近50种化探指标，并采用稳健统计方法进行了数据处理和异常圈定。化探结果在油气藏上方发现了清晰的、具不同指标组合的综合化探异常，与邻近空构造形成鲜明的对照。圈闭顶部的块状异常和圈闭周绿的环状、半环状异常是下伏油气藏的良好指示，而剖面上呈锯齿状、平面上呈线状的异常则与断裂带有关。实践表明，建立已知油气藏上方的化探异常模式及解剖已知空构造上方的地球化学特征对于指导本区或邻区的化探异常评价是十分必要的。     

Embryonic and larval development of Babylonia formosae habei (Altena and Gittenberger, 1981) (Gastropoda:Buccinidae) on China''''s coast

The development of embryos and larvae of Babylonia formosae habei living along the southeast coast of China is observed under laboratory conditions. The egg masses are laid by females on hard substrate at night and each capsule contains 100-500 eggs. Each egg is 250-280 mm in diameter. The first two cleavages of the embryo are meridional and equal, and a polar lobe is produced. Larval kidney, which only consists of a single cell, appears during the gastrula stage on each side of the embryo. The right tentacle develops prior to the left one. At 25-27℃, an intracapsulate veliger stage is reached about 4.5 d after deposition. The larvae hatch on the fifth day as swimming veligers with a shell length of 360 -500 mm. The newly hatched larva can ingest suspended algal cells from the water column and remains in the pelagic stage for 8-10 d. The newly settled juveniles are 900-1 200 mm in shell length.     

辽河盆地大民屯凹陷流体压力特征

大民屯凹陷是辽河断陷内4个下第三系凹陷之一。在综合利用钻井、试井及地震等资料的基础上，系统研究并论述了大民屯凹陷流体压力特征。基于57口井的声波测井资料，凹陷内泥岩压力特征可区分为正常压力、异常压力或强超压等类型；根据152口井391个点的压力测试数据，凹陷内产油层段的压力梯度多接近于1；利用公式法模拟计算了47条地震剖面的流体压力、剩余压力及压力系数的分布特征，凹陷内剖面压力系统自上而下一般由正常压力、弱超压和强超压3部分组成。此外，还根据流体压力演化的基本原理及钻井、岩性与试井等实际资料，模拟恢复了大民屯凹陷的压力演化史，其可划分为超压原始积累、超压部分释放及超压再积聚3个阶段。总体上，大民屯凹陷的超压强度低于渤海湾盆地其他地区的超压强度。     

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.