A technique for calibration of monostatic echosounder systems

A calibration technique has been adapted to render complete system calibrations of high-frequency acoustical instrumentation. This is based on standard targets; specifically, precisely manufactured spheres composed of tungsten carbide with 6% cobalt binder. The use of multiple sphere sizes was found to be advantageous, both as an independent check of the calibrations, and so that resonances in the sphere responses at certain frequencies could be avoided. Complete system gains and beam patterns, which include effects of bandpass filters and finite-pulse lengths, were determined by moving the spheres individually in the transducer far-fields. Use of this procedure ensures control over the acoustical characteristics of transducers, which may change from the time of manufacture and first testing due, for example, to platform mounting. It also provides a direct means of measuring the sampling volume at relatively high and constant signal-to-noise ratios. Implementation of this technique is discussed using a multifrequency sonar system as an example     

Solar radio burst (type III)

This article describes the observations of a type III radio burst observed at 103 MHz simultaneously by the two radio telescopes situated at Rajkot (22.3°N, 70.7°E) and Thaltej (23°N, 72.4°E). This event occurred on September 30, 1993 at about 0430 UT and lasted for only half a minute. The event consisted of several sharp spikes in a group. The rise and fall time of these are comparable, however the peaks of individual spikes varied by a factor of four. The comparison of these observations with the data of solar radio spectrograph HiRAS indicates that this was a metric radio burst giving highest emission at about 103 MHz.     

Studying Hydrodynamic Instability Using Shock-Tube Experiments

The hydrodynamic instability, which develops on the contact surface between two fluids, has great importance in astrophysical phenomena such as the inhomogeneous density distribution following a supernova event. In this event acceleration waves pass across a material interface and initiate and enhance unstable conditions in which small perturbations grow dramatically. In the present study, an experimental technique aimed at investigating the above-mentioned hydrodynamic instability is presented. The experimental investigation is based on a shock-tube apparatus by which a shock wave is generated and initiates the instability that develops on the contact surface between two gases. The flexibility of the system enables one to vary the initial shape of the contact surface, the shock-wave Mach number, and the density ratio across the contact surface. Three selected sets of shock-tube experiments are presented in order to demonstrate the system capabilities: (1) large-initial amplitudes with low-Mach-number incident shock waves; (2) small-initial amplitudes with moderate-Mach-number incident shock waves; and (3) shock bubble interaction. In the large-amplitude experiments a reduction of the initial velocity with respect to the linear growth prediction was measured. The results were compared to those predicted by a vorticity-deposition model and to previous experiments with moderate- and high-Mach number incident shock waves that were conducted by others. In this case, a reduction of the initial velocity was noted. However, at late times the growth rate had a 1/t behavior as in the small-amplitude low-Mach number case. In the small-amplitude moderate-Mach number shock experiments a reduction from the impulsive theory was noted at the late stages. The passage of a shock wave through a spherical bubble results in the formation of a vortex ring. Simple dimensional analysis shows that the circulation depends linearly on the speed of sound of the surrounding material and on the initial bubble radius.     

Infrared observations of serendipitous hard Chandra X-ray sources

We present observations of a sample of optically faint, hard X-ray sources of the kind likely to be responsible for much of the hard X-ray background. We confirm that such sources are easily detected in the near-infrared, and find that they have a featureless continuum suggesting that the active nucleus is heavily obscured. The infrared colours of the majority of the targets observed are consistent with absorbed elliptical host galaxies at z =1–2. It is likely that we are observing some of the brighter members of the important new class of X-ray type II quasars.     

Dissolved organic carbon dynamics in two streams draining forested catchments at loch ard,Scotland

Dissolved organic carbon (DOC) was measured at four or eight hour intervals between mid-1989 and mid-1991 in two catchments in west central Scotland. The experimental catchment had been recently clear-felled and the control remained under forest. The amount of DOC varied during individual storm events following the stream hydro-graph. Maximum variations were found in the summer half-year and in the clear-felled catchment. There was also evidence of the exhaustion of DOC in the later events of a sequence. Differences between the catchments were related to catchment characteristics and to land-use change. The reduced magnitude of variation in DOC with discharge in the control stream was due to the influence of a wetland area through which the stream flowed. The mean DOC concentrations were similar in the two streams and annual exports were 15 g m^?2 from the control and 16g m^?2 from the felled catchment. The stream draining the clear-felled catchment had greater high flow DOC concentrations in the summer half-year, probably due to the effect of greater mean summer temperatures on DOC release and of the greater supply of organic debris in the stream channel.     

Spine–sheath polarization structures in four active galactic nuclei jets

We present the results of multifrequency (15 + 8 + 5 GHz) polarization Very Long Baseline Array (VLBA) observations of the three BL Lacertae objects 0745+241, 1418+546 and 1652+398 together with 5-GHz VLBI Space Observatory Programme (VSOP) observations of 1418+546 and 1.6- and 5-GHz VSOP observations of the blazar 1055+018. The jets of all these sources have polarization structure transverse to the jet axis, with the polarization E vectors aligned with the jet along the jet spine and 'sheaths' of orthogonal E vectors at one or both edges of the jet. The presence of polarization aligned with the jet near the 'spine' may indicate that the jets are associated with helical B fields that propogate outward with the jet flow; the presence of orthogonal polarization near the edges of the jet may likewise be a consequence of a helical jet B field, or may be owing to an interaction with the ambient medium on parsec scales. We have tentatively detected interknot polarization in 1055+018 with E aligned with the local jet direction, consistent with the possibility that the jet of this source is associated with a helical B field.     

Effects of Different Diets on the Dietary Attractability and Selectivity of Chinese Shrimp, Fenneropenaeus chinensis

Attractabilities of different diets and dietary selectivity of Chinese shrimp, Fenneropenaeus chinensis were studied through behavior observation and feeding experiment, respectively. The five diets used in the experiment are: Fish Flesh (FF), Shrimp Flesh (SF), Clam Foot (CF), Polychaete Worm (PW), and Formulated Diet (FD). No significant differences of attractability exist between any two different diets when every two natural diets or all five diets are provided simultaneously. On the other hand, significant differences of attractability exist between FD and every single natural diet when they are provided simultaneously. Results of behavioral observation indicate that natural diets are more attractive than FD. In feeding experiment, Chinese shrimp has distinct selectivity on different diets. It positively selects CF and PW, negatively selects FF and SF, and excludes FD absolutely. The results of the present studies indicate that the dietary selectivity of shrimp was based not only on the attractabilities of the diets, but also on the responses such as growth and food conversion.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.