SAMPLING METHODS AND APPROACHES USING RADIONUCLIDE TRACERS IN THE STUDY OF SEDIMENT RESUSPENSION AND CROSS MARGIN TRANSPORT IN NEARSHORE OF THE LAURENTIAN GREAT LAKES

1 INTRODUCTION Sediment resuspension, particularly in response to episodic storm events, is a common characteristic of coastal and nearshore environments. The resulting 揵enthic storms?may play a significant role in the dynamics of benthic systems, including structuring the physical characteristics of the bottom, providing a mechanism for the recycling of biogeochemically important materials to the water column, and driving horizontal and cross margin transport of suspended particulates …     

Mineral-chemical studies of metamorphosed hydrothermal alteration in the Kristineberg volcanogenic massive sulfide district,Sweden

Mineralium Deposita - The massive sulfide deposits of the Kristineberg area, Sweden, occur within a 2- to 3-km-thick succession of felsic volcaniclastic rocks belonging to the Skellefte Group. The...     

Structure and evolution of an obliquely sheared continental margin: Rio Muni, West Africa

Oblique-shear margins are divergent continental terrains whose breakup and early drift evolution are characterized by significant obliquity in the plate divergence vector relative to the strike of the margin. We focus on the Rio Muni margin, equatorial West Africa, where the ca. 70-km-wide Ascension Fracture Zone (AFZ) exhibits oblique–slip faulting and synrift half-graben formation that accommodated oblique extension during the period leading up to and immediately following whole lithosphere failure and continental breakup (ca. 117 Ma). Oblique extension is recorded also by strike–slip and oblique–slip fault geometry within the AFZ, and buckling of Aptian synrift rocks in response to block rotation and local transpression. Rio Muni shares basic characteristics of both rifted and transform margins, the end members of a spectrum of continental margin kinematics. At transform margins, continental breakup and the onset of oceanic spreading (drifting) are separate episodes recorded by discrete breakup and drift unconformities. Oceanic opening will proceed immediately following breakup on a rifted margin, whereas transform and oblique-shear margins may experience several tens of millennia between breakup and drift. Noncoeval breakup and drift have important consequences for the fit of the equatorial South American and African margins because, in reconstructing the configuration of conjugate continental margins at the time of their breakup, it cannot be assumed that highly segmented margins like the South Atlantic will match each other at their ocean–continent boundaries (OCBs). Well known ‘misfits’ in reconstructions of South Atlantic continental margins may be accounted for by differential timing of breakup and drifting between oblique-shear margins and their adjacent rifted segments.     

On bimodal differentiation by solidification front instability in basaltic magmas, part 1: basic mechanics

Extensive, coarse-grained silicic lenses are common in the upper portions of large diabase sills, lava lakes, and gabbroic intrusions. These lenses, which often contain up to 10 wt% more silica than their host rocks, record a clear process of bimodal differentiation that may play a fundamental role in generating significant quantities of silicic magma in predominantly basaltic systems. The spatial, compositional, textural, and contact relations suggest that these silicic segregations form by infilling of tears formed during gravitational instability of the upper solidification front. This process is investigated in some detail by exploring the thermal and mechanical conditions leading to internal failure of the front and segregation formation. As the upper solidification front grows inward and thickens, the local strength of the developing crystalline network must increase upward through the front sufficiently fast to offset the increasing weight of the front itself. This necessary local variation in strength dictates how crystallinity must vary to prevent failure. But the actual variation in crystallinity is determined by phase equilibria, which in general varies in a fashion that is noncovariant with that required for mechanical stability. It is this mismatch that apparently leads to failure and formation of silicic segregations. The rate of filling of the tears by porous flow of interstitial melt from below regulates the rate of tear opening, and the overall size of the tears is regulated by the local rate of advance of the solidification front. Segregations therefore thicken downward as the growth of the front slows and then die out altogether with approach of the lower solidification front. This process irreversibly introduces siliceous noise into basaltic systems. The silicic signal can be enhanced through subsequent reprocessing of the host rock to form volumetrically important masses of silicic magma. This process may be fundamental to achieving the strong compositional diversity of the igneous rocks, to yielding continental masses, and to the differentiation of Earth itself.     

Cathodoluminescence petrography and isotope geochemistry of KT impact ejecta deposited 360 km from the Chicxulub crater, at Albion Island, Belize

The depositional and diagenetic history of Cretaceous–Tertiary (KT) impact ejecta deposited 360 km from the Chicxulub crater, at Albion Island, Belize, has been investigated using integrated cathodoluminescence and isotopic analyses. A quarry exposes 26 m of Upper Cretaceous Barton Creek Formation dolomitized marine limestone overlain by 16 m of dolomitized Albion Formation impact ejecta. The Albion Formation consists of a lower fine‐grained ≈1‐m‐thick spheroid bed and an upper 15‐m‐thick coarse conglomeratic diamictite bed. A 14‐event paragenetic sequence has been documented and used as a temporal framework to interpret chemostratigraphic trends in bulk rock δ¹⁸O, δ¹³C and ⁸⁷Sr/⁸⁶Sr. The uppermost surface of the Barton Creek Formation was subaerially exposed before the KT impact, as indicated by a brecciated palaeosol that caps upsection decreases in δ¹³C and δ¹⁸O. Small 1‐cm‐diameter spheroids in the spheroid bed exhibit vermicular crystalline textures but lack the concentric zonations common to accretionary lapilli. These spheroids are hypothesized originally to have been impact glass or reactive Ca and Mg oxide dusts that adhered to water vapour particles condensing from the cooling impact vapour cloud. The spheroids were dolomitized soon after deposition. The earliest dolomitization in the matrix sediments of the Albion Formation was also post‐depositional, replacing clays formed by devitrification of impact glass. Dolomite and clay ⁸⁷Sr/⁸⁶Sr exhibit a distinct symmetrical distribution in the spheroid bed ranging from 0·707745 to 0·707872. Although unproven, this may represent primary changes in the chemical composition of the impact glass. The limestone clasts in the diamictite bed were dolomitized before the KT impact and exhibit upsection decreases in bulk rock ⁸⁷Sr/⁸⁶Sr. This suggests that the clasts were excavated from strata equivalent in age or older than the Barton Creek Formation at locations closer to, or in, the Chicxulub crater.     

Extraction of hysteretic properties of seismically isolated bridges from quick‐release field tests

A simple procedure for identifying hysteretic properties of seismically isolated bridges from full‐scale quick‐release tests is presented in this paper. An analytical solution for the quick‐release response of a SDOF system with a bilinear spring is derived. Based on the solution, some characteristics of such systems are obtained. A time domain optimization method is employed to identify the hysteretic properties of the lead–rubber bearings installed in seismically isolated bridges. The total damping effects of the isolation system are expressed as a combination of the rate‐independent (hysteretic) damping and the linear viscous damping. The Menegotto–Pinto (MP) model and bilinear model are used to represent the force–displacement relation of the lead–rubber bearings. In both the longitudinal and transverse directions the bridges have been idealized as single degree of freedom (SDOF) systems. Time histories recorded from the field quick‐release tests on two bridges are used for the examples presented herein. The hysteretic loops of the isolators obtained from laboratory tests are compared with those obtained using the optimization method, and they agree well. In conclusion, the procedure shown in this paper can be used to identify the essential in situ hysteretic characteristics of isolation bearings from quick‐release field testing. Copyright © 2001 John Wiley & Sons, Ltd.     

Differential responses of zooplankton populations (Bosmina longirostris) to fish predation and nutrient-loading in an introduced and a natural sockeye salmon nursery lake on Kodiak Island, Alaska, USA

Stratigraphic changes in the remains of Bosmina longirostris from a lake with an introduced sockeye salmon population and a lake with a natural salmon run on Kodiak Island demonstrated markedly different responses to past fluctuations in salmon populations. In both lakes, there was a positive correlation between the density of Bosmina microfossils and the abundance of sockeye salmon. However, opposite size trends were observed in the two lakes. In Karluk Lake, which has a native sockeye salmon population, Bosmina mean carapace lengths were largest at high salmon densities, and mean mucro and antennule lengths were also large, suggesting strong predation pressure from cyclopoid copepods, and less intense pressure from juvenile sockeye salmon. As salmon-derived nutrients are important in driving primary productivity in this system, changes in zooplankton productivity track salmon escapement, but grazing pressure on Bosmina from juvenile salmon is less important than that from cyclopoid copepods. In Frazer Lake, a lake with an introduced salmon population, Bosmina morphologies were smallest during periods of high sockeye salmon in the lake, suggesting much stronger predation effects from sockeye salmon due to the suppression of Cyclops columbianus. Latent development of compensatory mechanisms and the delayed recovery of copepod populations to salmon introductions has resulted in zooplankton populations that are still recovering from shifts in fish populations that occurred decades earlier. The differential response of Bosmina populations between the natural and manipulated lakes suggests that care must be taken when attempting to extrapolate results from whole-lake manipulations and short-term experiments to natural systems.     

Mars landscape evolution: influence of stratigraphy on geomorphology in the north polar region

Lithology and physical properties of strata exposed at the Earth's surface have direct influence on the erosion and geomorphic expression of landforms. While this is well known on our planet, examples on Mars are just coming to light among the tens of thousands of airphoto-quality images (resolutions 1.5–12 m/pixel) acquired since 1997 by the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC). Specific examples occur among martian north polar layered materials, which MOC images reveal are divided into two distinct stratigraphic units: a lower, dark-toned layered unit and a younger, upper, lighter-toned layered unit. The lower unit is less resistant to wind erosion than the upper unit. The upper unit most likely consists of stratified dust and ice, while the lower unit contains abundant, poorly cemented sand. Sand is more easily mobilized by wind than dust; the lower resistance to erosion of the lower unit results from the presence of sand. Where wind erosion in polar troughs has penetrated to the lower unit, geomorphic change has proceeded more rapidly: sand has been liberated from the lower unit, and arcuate scarps have formed as the upper unit has been undermined. Wind erosion of the lower unit thus influences the geomorphology of the north polar region; this result likely explains the genesis of the large polar trough, Chasma Boreale, and the relations between dunes and arcuate scarps that have puzzled investigators for nearly three decades. The properties of the stratigraphic units suggest that the upper limit for the amount of water contained in the north polar layered materials may be 30–50% less than previously estimated.     

Reconstruction of urban stormwater contamination of an estuary using catchment history and sediment profile dating

Cores were collected from the length of Pakuranga estuary, a small urban estuary in Auckland, New Zealand, to determine sedimentation and contaminant history, and in particular the impact of urbanization. Catchment sediment loads for the most recent history (1953–1995), including urbanization since 1960, were reconstructed using the landcover history and soil erosion modeling. Pollen and¹⁴C dating and pre-urban landcover history were used to reconstruct early estuary sedimentation (i.e., post-3000 yr BP to 1960). Heavy metal concentrations, particle size,¹³⁷Cs, pollen, and catchment sediment loads were all needed to disentangle the complex estuarine response to urbanization.¹³⁷Cs profiles did not reflect the historical fallout pattern, but deposition of¹³⁷Cs-labelled eroded catchment soil, coinciding with peaks in urban construction. Temporal variations in stormwater¹³⁷Cs concentrations are likely due to varying contributions from¹³⁷Cs-rich topsoil and¹³⁷Cs-poor subsoils. A similar pattern was observed in heavy-metal concentrations and attributed to street runoff rather than topsoil being diluted by metal-poor subsoils. Dating of the sediment profiles showed that during urbanization sedimentation rates in the tidal creek and estuary were higher than sedimentation rates associated with past agricultural landuse and the original forest landcover. Urbanization has brought about substantial environmental changes in the upper estuary through continued infilling of shallow, intertidal areas, contamination by heavy metals to levels of ecological concern, sediment textural changes, and rapid mangrove colonization of formerly bare intertidal sediments.     

Microphytobenthos contribution to nutrient-phytoplankton dynamics in a shallow coastal lagoon

Nutrient fluxes and primary production were examined in Lake Illawarra (New South Wales, Australia), a shallow (Z_mean=1.9 m) coastal lagoon with a surface area of 35 km², by intensive measurement of dissolved nutrients and oxygen profiles over a 22-h period. Rates of primary production and nutrient uptake were calculated for the microphytobenthos, seagrass beds, macroalgae, and pelagic phytoplankton. Although gross nutrient release rates to the water column and sediment pore waters were potentially high, primary production by microphytobenthos rapidly sequesters the re-mineralized nutrients so that net releases, averaged over times longer than a day, were low. Production in the water column was closely coupled with the relatively low sediment net nutrient release rates and detrital decomposition in the water column. Dissolved inorganic nitrogen and silica concentrations in the water column are drawn down at the beginning of the day. The system did not appear to be light limited so photosynthesis occurs as fast as the nutrients become available to the phytoplankton and microphytobenthos. We conjecture that microphytobenthos are the dominant primary producers and, as has been shown previously, that the nutrient uptake occurs in phase with the various stages of the diatom growth.