Impact factors identification of spatial heterogeneity of herbaceous plant diversity on five southern islands of Miaodao Archipelago in North China

Herbaceous plants are widely distributed on islands and where they exhibit spatial heterogeneity. Accurately identifying the impact factors that drive spatial heterogeneity can reveal typical island biodiversity patterns. Five southern islands in the Miaodao Archipelago, North China were studied herein. The spatial distribution of herbaceous plant diversity on these islands was analyzed, and the impact factors and their degree of impact on spatial heterogeneity were identified using CCA ordination and ANOVA. The results reveal 114 herbaceous plant species, belonging to 94 genera from 34 families in the 50 plots sampled. The total species numbers on different islands were significantly positively correlated with island area, and the average α diversity was correlated with human activities, while the β diversity among islands was more affected by island area than mutual distances. Spatial heterogeneity within islands indicated that the diversities were generally high in areas with higher altitude, slope, total nitrogen, total carbon, and canopy density, and lower moisture content, pH, total phosphorus, total potassium, and aspect. Among the environmental factors, pH, canopy density, total K, total P, moisture content, altitude, and slope had significant gross effects, but only canopy density exhibited a significant net effect. Terrain affected diversity by restricting plantation, plantation in turn influenced soil properties and the two together affected diversity. Therefore, plantation was ultimately the fundamental driving factor for spatial heterogeneity in herbaceous plant diversity on the five islands.     

Contribution of phytoliths to total biogenic silica volumes in the tropical rivers of Malaysia and associated implications for the marine biogeochemical cycle

The contribution of phytoliths to total biogenic silica (BSi) volumes in rivers worldwide, and the associated implications for the biogeochemical cycle, require in-depth study. Based on samples from rivers in Peninsular Malaysia, this project investigated the source and characteristics of BSi found in Asian tropical rivers, as well as the process of reverse weathering taking place in these fluvial systems. Results indicated that BSi samples collected in sediments consisted of phytolith, diatom and sponge spicules. Phytoliths, predominantly of the elongate form, comprised 92.8%–98.3% of BSi in the Pahang River. Diatom BSi in this river consisted mainly of pennatae diatoms, but represented a relatively small proportion of the total BSi volume. However, diatom BSi (predominantly of the Centricae form) was more prevalent in the Pontian and Endau Rivers with shares of 68.8% and 79.3% of the total BSi volumes, respectively, than Pahang River. Carbon contents of the BSi particulates ranged from 1.85% to 10.8% with an average of 4.79%. These values are higher than those recorded in other studies to date, and indicate that BSi plays a major role in controlling permanent carbon burial. This study suggests that phytoliths from terrestrial plants are the primary constituents of BSi in the rivers of Peninsular Malaysia, and therefore represent a significant proportion of the coastal silica budget.     

Heavy metals in sediments and their bioaccumulation in <Emphasis Type="Italic">Phragmites australis</Emphasis> in the Anzali wetland of Iran

Accumulation of metals in both sediments and Phragmites australis organs was studied. Samples were collected from seven stations located in Anzali wetland, Iran. The samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The results showed that concentration of the studied metals (except As and Cd) were higher in sediments than in P. australis organs. Metal accumulation was found to be significantly (P <0.05) higher in roots than in above-ground organs of P. australis. The bioaccumulation factor (BAF) and the transfer factor (TF) also verified the highest rate of metal accumulation in roots and their reduced mobility from roots to the above-ground organs. Pearson correlation coefficient showed significant relationships between metal concentrations in sediments and those in plant organs. It should be pointed out that sediment and plant samples exhibited higher metal concentrations in eastern and central parts than in western and southern parts of the wetland. The mean concentrations of all studied elements (except for Fe, V and Al) were higher in these sediment samples than in the Earth’s crust and shale. High accumulation of metals in P. australis organs (roots and shoots) is indicative of their high bioavailability in sediments of the wetland. The correlation between metal concentrations in sediments and in P. australis indicates that plant organs are good bioindicators of metal pollution in sediments of Anzali wetland.     

Phylogenetic diversity of culturable bacteria in surface seawater from the Drake Passage,Antarctica

The Drake Passage is located between the Antarctic Peninsula and Tierra del Fuego in the south of South America. Surface seawater samples were collected at seven sites in the Drake Passage during the austral summer of 2012. The 16S rRNA sequences were analyzed from 187 isolated bacterial strains. Three phyla, 29 genera and 56 species were identified. The three phyla were Actinobacteria, Firmicutes and Proteobacteria; the Proteobacteria included α-Proteobacteria, β-Proteobacteria and γ-Proteobacteria. γ-Proteobacteria, Actinobacteria and Firmicutes were the dominant class or phyla in terms of quantity and species. Gram-positive bacteria (Actinobacteria and Firmicutes) accounted for 57.8% of all types identified. There were nine dominant genera, including Curtobacterium, Staphylococcus, and Halomonas, and 14 dominant species including Curtobacterium flaccumfaciens, Curtobacterium pusillum, and Staphylococcus sciuri. Of the strains identified, 87.2% were catalase positive or weakly positive.     

Preliminary studies on the dynamic prediction method of rainfall-triggered landslide

Rainfall-triggered landslides have posed significant threats to human lives and property each year in China. This paper proposed a meteorologicalgeotechnical early warning system GRAPES-LFM(GRAPES: Global and Regional Assimilation and Pr Ediction System; LFM: Landslide Forecast Model),basing on the GRAPES model and the landslide predicting model TRIGRS(Transient Rainfall Infiltration and Grid-based Regional Slope-Stability Model) for predicting rainfall-triggered landslides.This integrated system is evaluated in Dehua County,Fujian Province, where typhoon Bilis triggered widespread landslides in July 2006. The GRAPES model runs in 5 km×5 km horizontal resolution, and the initial fields and lateral boundaries are provided by NCEP(National Centers for Environmental Prediction) FNL(Final) Operational Global Analysis data. Quantitative precipitation forecasting products of the GRAPES model are downscaled to 25 m×25 m horizontal resolution by bilinear interpolation to drive the TRIGRS model. Results show that the observed areas locate in the high risk areas, and the GRAPES-LFM model could capture about 74% of the historical landslides with the rainfall intense 30mm/h. Meanwhile, this paper illustrates the relationship between the factor of safety(FS) and different rainfall patterns. GRAPES-LFM model enables us to further develop a regional, early warning dynamic prediction tool of rainfall-induced landslides.     

Experimental study of motion characteristics of rock slopes with weak intercalation under seismic excitation

In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation. The dynamic response of the prototype slopes were studied in laboratory with the consideration of law of similitude. The initiation failure was observed in the rock slope model with a counter-tilt thin-weak intercalation firstly, not in the slope model with a horizontal thin-weak intercalation. Furthermore, it was interesting that the fracture site is shifted from crest top to the slope surface near the weak intercalation, which is different with the location of failure position in a normal layered slope. We also discussed the effect of the dip angle and the thickness of weak intercalation on the failure mechanism and instability mode of the layered rock slope. From the experimental result, it was noted that the stability of the slope with a counter-tilt weak intercalation could be worse than that of the other slopes under seismic excitation. The findings showed the difference of failure in slopes with a horizontal and counter weak intercalation, and implicated the further evaluation of failure of layered slopes caused by seismic loads.     

Development and installation of bedload monitoring systems with submerged load cells

Bedload governs riverbed channel variations and morphology, it is necessary to determine bedload discharge through an arbitrary cross section in a mountain river. A new system with submerged load cells has been developed to directly measure bedload discharge. The system consists of: (1) an iron box which is 1 m long, 0.5 m wide and 0.1 m in depth, (2) two submerged load cells 0.7 m apart, (3) a pressure sensor and, (4) an electromagnetic velocity meter. This system has been designed to exclude the effect of the hydraulic pressure of water on direct measurements of bedload particle weight. Initial tests in a laboratory were conducted to examine the accuracy of measurements with the system under aerial conditions. The system has been installed in the supercritical flume in Ashi-arai-dani River of the Hodaka Sedimentation Observatory of the Disaster Prevention Research Institute (DPRI) of Kyoto University to obtain bedload discharge under natural conditions. Flume tests were conducted in this channel by artificial supply of uniform sediment particles of several grain sizes. The average velocity of the sediment particles near the bed was estimated using cross-correlation functions for weight waves obtained by the two load cells. Bedload discharge calculations were based on time integration of the product of sediment velocity and sediment weight obtained by the two load cells. This study clarifies the reasons why bedload measurements are difficult, and provides some solutions using the monitoring systems with submerged load cells through the field measurements. Additionally, the applicability of bedload measurement with the submerged load cells is explained based on experimental artificial sediment supply data.     

Field observations of debris-flow initiation processes on sediment deposits in a previous deep-seated landslide site

Although information regarding the initiation processes of debris flows is important for the development of mitigation measures,field data regarding these processes are scarce.We conducted field observations of debris-flow initiation processes in the upper Ichinosawa catchment of the Ohya landslide,central Japan.On 19 June 2012,our videocamera monitoring systems recorded the moment of debris-flow initiation on channel deposits(nine surges) and talus slopes(eight surges).The initiation mechanisms of these surges were classified into three types by analyzing the video images: erosion by the surface flow,movement of deposits as a mass,and upward development of the fluid area.The first type was associated with the progress of surface flow from the upper stream on unsaturated channel deposits.The second type was likely caused by an increase in the pore water pressure associated with the rising in the groundwater level in channel deposits;a continuous water supply from the upper stream by the surface flow might have induced this saturation.The third type was associated with changes in the downstream topography caused by erosion.The flow velocity of most surges was less than 3 m s~(-1) and they usually stopped within 100 m from the initiation point.Surges with abundant pore fluid had a higher flow velocity(about 3- 5 m s~(-1)) and could travel for alonger duration.Our observations indicate that the surface flow plays an important role in the initiation of debris flows on channel deposits and talus slopes.     

Dynamic process simulation with a Savage-Hutter type model for the intrusion of landslide into river

Natural damming of rivers by mass movements is a very common and potentially dangerous phenomena which has been documented all over the world. In this paper, a two-layer model of Savage-Hutter type is presented to simulate the dynamic procedure for the intrusion of landslide into rivers. The two-layer shallow water system is derived by depth averaging the incompressible Navier-Stokes equations with the hydrostatic assumption. A high order accuracy scheme based on the finite volume method is proposed to solve the presented model equations. Several numerical tests are performed to verify the realiability and feasibility of the proposed model. The numerical results indicate that the proposed method can be competent for simulating the dynamic process of landslide intrusion into the river. The interaction effect between both layers has a significant impact on the landslide movement, water fluctuation and wave propagation.     

Spatial assessment of forest cover and land-use changes in the Hindu-Kush mountain ranges of northern Pakistan

Anthropogenic activities and natural processes are continuously altering the mountainous environment through deforestation, forest degradation and other land-use changes. It is highly important to assess, monitor and forecast forest cover and other land-use changes for the protection and conservation of mountainous environment. The present study deals with the assessment of forest cover and other land-use changes in the mountain ranges of Dir Kohistan in northern Pakistan, using high resolution multi-temporal SPOT-5 satellite images. The SPOT-5 satellite images of years 2004, 2007, 2010 and 2013 were acquired and classified into land-cover units. In addition, forest cover and land-use change detection map was developed using the classified maps of 2004 and 2013. The classified maps were verified through random field samples and Google Earth imagery (Quick birds and SPOT-5). The results showed that during the period 2004 to 2013 the area of forest land decreased by 6.4%, however, area of range land and agriculture land have increased by 22.1% and 2.9%, respectively. Similarly, barren land increased by 1.1%, whereas, area of snow cover/glacier is significantly decreased by 21.3%. The findings from the study will be useful for forestry and landscape planning and can be utilized by the local, provincial and national forest departments; and REDD+ policy makers in Pakistan.