淮河流域土壤湿度异常的时空分布特征及其与气候异常关系的初步研究

利用中国东部1990~2000年旬平均土壤湿度、降水和气温观测资料，通过对0~50 cm层次土壤湿度进行旋转主分量分析 (REOF)，重点分析了淮河流域土壤湿度的时空分布特征, 并初步研究了土壤湿度与前期、同期和后期不同时段降水与气温的关系。发现春季以30 cm为界，30 cm以上各层土壤湿度异常的第一旋转空间模态十分相似, 其大值中心主要位于淮河流域，而30 cm以下 (30~50 cm) 各层的第二旋转空间模态与之亦十分类似, 因此称该模态为“淮河型”，而夏季和秋季虽然该模态也很显著, 但特征不如春季突出。该模态在各层次土壤中具有明显的持续性特征，均存在40旬左右的显著周期；并与前期和同期降水（气温）呈显著正 (负) 相关关系，与约半年后的降水 (气温) 呈负 (正) 相关关系。     

红松、兴安落叶松、红皮云杉苗圃苗木的换床试验研究

通过对兴安落叶松、红松、红皮云杉等小兴安岭主要树种不同床高、不同解冻深度裸根苗的生长发育与土壤各层地温、主要气候因子关系的研究，表明：床高30—35cm对换床苗木生长较为有利。兴安落叶松以解冻15cm换床效果较好；红松以解冻25cm换床效果较好；红皮云杉以解冻20cm换床效果较好。气温、相对湿度、降水量、日照时数等主要气候因子对不同床高、不同解冻深度换床苗木生长的影响是多因子综合作用的结果，各气候因子之间相互制约、相互影响。     

河南省夏玉米产量预报方法

利用河南省农业气象产量预报业务系统(WAPFOS),分析了夏玉米产量与光照、降水、气温等影响因子的关系,结果表明,旬降水量、旬日照时数和旬平均气温与夏玉米产量关系密切,是直接影响产量的重要因素.在此基础上,建立了预报模型.     

某既有建筑物改造工程地基加固质量的综合检测

随着既有建筑物的增层改造工程的发展和技术的日益成熟 ,为了提高原有建筑物地基土强度和变形能力 ,对其基础加固处理也愈加频繁。如何准确有效地评价其地基加固质量及其空间变化的均匀性是关系此类工程安全可靠的重要保证。本文以某一工程为例 ,讨论既有建筑物增层改造工程的地基加固质量的检测和综合评价方法。该建筑物建于 5 0年代 ,原设计为 5层 ,现增层为 6层 ,采用高压注浆方法进行地基加固处理.     

武汉市区第四系含水层地下水有机污染敏感性研究

在详细调查武汉市水文地质条件和地下水污染现状的基础上，获得了高精度的武汉市水环境中微量有机污染物的组成数据。所检测出的有机组分达30余种，以苯及相关苯系物为主，污染程度较高的地下水主要分布在人口密集区和工业，商业区，应用改进的DRASTIC模型－地下水污染敏感性评价模型，在GIS平台上，编制了武汉市区地下水污染敏感性分区图。根据其评价结果，建议集中对那些敏感性相对较高的区域采取有效的环保措施，开发利用时应作出风险评价。     

A recursive decomposition algorithm for network seismic reliability evaluation

A new probabilistic analytical approach to evaluate seismic system reliability of large lifeline systems is presented in this paper. The algorithm takes the shortest path from the source to the terminal of a node weight or edge weight network as decomposition policy, using the Boolean laws of set operation and probabilistic operation principal, a recursive decomposition process then could be constructed. For a general weight network, the modified Torrieri method (NTR/T method) is introduced to combine with the suggested algorithm. Therefore, the recursive decomposition algorithm may be applied to evaluate the seismic reliability of general lifeline systems. A series of case studies, including a practical district electric power network system and a large urban water supply system, show that the suggested algorithm supplies a useful probabilistic analysis means for the seismic reliability evaluation of large lifeline systems. Copyright © 2002 John Wiley & Sons, Ltd.     

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。     

四川石棉县首次发现独特的自然铂矿床

攀西地区大片前震旦纪结晶基底杂岩中产出有众多的前晋宁期层状侵入体，其间可见钒钛磁铁矿化，铬铁矿化，最近在石棉境内新发现一处含铂矿化体呈层状，网脉状产于层状侵入体中，且多以自然铂单矿物存在。伴生主要矿物为磁铁矿，钛铁矿，黄铁矿，黄铜矿等。初步认为该矿床类型属产于层状铁质基性-超基性岩与铜硫化物-钡钛磁铁矿有关的构造-热液再活化型自然铂矿床。     

^40Ar／^39Ar Fast Neutron Activation Ages of Quartz from the Jinman Vein Copper Dposit in Western Yunnan and Their Significance

Quartz samples collected from the Jinman vein copper deposit in the Lanping Basin of western Yunnan were determined by⁴⁰Ar/³⁹Ar fast neutron activation techniques, and the spectra are characterized as being saddle-shaped. The samples yielded a plateau age of 58.05 ± 0.54 Ma, a minimum appearance age of 56.76 ±0.81 Ma and an isochron age of 54.30 ± 0.15 Ma, the three ages being close to each other, indicating that the ages of the quartz samples so far determined are true and reliable. The plateau age represents the time of formation of Cu-bearing quartz veins, which is corresponding to Early Himalayan. This age is also consistent with the time at which a tectonically thermal event (60 Ma) took place within the Lanping Basin, Yunnan Province. In consideration of the fact that copper ore and other ore types in the vast area of western Yunnan are concentrated mainly in the Early Himalayan strata, the authors believe that there must have existed some indispensable key factors leading to metallogenesis on a large scale during the Early Himalayan period in western Yunnan and also constraining in union the formation of ore deposits there.     

Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.