Use of quantitative landslide hazard and risk information for local disaster risk reduction along a transportation corridor: a case study from Nilgiri district, India

The objective of analyzing hazard and risk in an area is to utilize the result in selecting appropriate landslide risk reduction strategies. However, this does not happen always, and most often results of the hazard and risk analysis remain at an academic level. The under or non-utilization of results in pre-disaster planning could be due to several reasons, including difficulties in understanding the scientific content/meaning of the models, and lack of information on the practical significance and utility of the models. In this study, an attempt is made to highlight the uses of hazard and risk information in different landslide risk reduction strategies along a transportation corridor in Nilgiri, India. At first, a quantitative analysis of landslide hazard and risk was made. The obtained information was then incorporated in risk reduction options such as land use zoning, engineering solutions, and emergency preparedness. For emergency preparedness, the perception of the local Nilgiri communities toward landslide risk was evaluated and simplified maps were generated for the benefit and understanding of end users. A rainfall threshold-based early warning system was presented, which could be used in risk awareness programs involving public participation. The use of quantitative risk information in the cost-benefit analysis for the planning of structural measures to protect the road and railway alignments was also highlighted, and examples were shown how the transport organizations could implement these measures. Finally, the study provided examples of the utility of hazard and risk information for spatial planning and zoning, indicating areas where the landslide hazard is too high for planning future developments.     

Geochemical processes regulating groundwater chemistry with special reference to nitrate and fluoride enrichment in Chhatarpur area, Madhya Pradesh, India

The present study focuses on the hydrogeochemical composition of groundwater in Chhatarpur area with special focus on nitrate and fluoride contamination, considering the fact that groundwater is the only major source of drinking water here. Carbonate and silicate mineral weathering followed by ground water–surface water interactions, ion exchange and anthropogenic activities are mainly responsible for high concentrations of cations and anions in the groundwater in the region. The average concentration of nitrate and fluoride found in 27 samples is 1.08 and 61.4 mg/L, respectively. Nitrate enrichment mainly occurs in areas occupied with intense fertilizer practice in agricultural fields. Since the area is not dominated by industrialization, the possibility of anthropogenic input of fluoride is almost negligible, thus the enrichment of fluoride in groundwater is only possible due to rock–water interaction. The highly alkaline conditions, which favor the fluorite dissolution, are the main process responsible for high concentration of fluoride.     

Multiwavelength Observations of an Eruptive Flare: Evidence for Blast Waves and Break-Out

Images of an east-limb flare on 3 November 2010 taken in the 131 Å channel of the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory provide a convincing example of a long current sheet below an erupting plasmoid, as predicted by the standard magnetic reconnection model of eruptive flares. However, the 171 Å and 193 Å channel images hint at an alternative scenario. These images reveal that large-scale waves with velocity greater than 1000 km?s^?1 propagated alongside and ahead of the erupting plasmoid. Just south of the plasmoid, the waves coincided with type-II radio emission, and to the north, where the waves propagated along plume-like structures, there was increased decimetric emission. Initially, the cavity around the hot plasmoid expanded. Later, when the erupting plasmoid reached the height of an overlying arcade system, the plasmoid structure changed, and the lower parts of the cavity collapsed inwards. Hot loops appeared alongside and below the erupting plasmoid. We consider a scenario in which the fast waves and the type-II emission were a consequence of a flare blast wave, and the cavity collapse and the hot loops resulted from the break-out of the flux rope through an overlying coronal arcade.     

Petrographic Characteristics and Alteration Geochemistry of Granite-hosted Tungsten Mineralization at Degana, NW India

Abstract. Vein type tungsten mineralization at Degana is genetically and spatially associated with the Degana Granite. The deposit is characterized by pervasive wall rock alteration around the mineralized quartz veins. Laterally three different alteration zones, greisen, silicification and potassic zones, are marked based on the field features, mineral assemblages and geo-chemical characteristics. In the present paper, systematic mineralogical and chemical variation in these alteration zones is reported. Thick mono-mineralic (zinnwaldite) selvages around the veins characterize the deposit. Plagioclase and alkali feldspar are low in the greisen zones while K-feldspar shows more increase than plagioclase in the potassic zone. Quartz is uniformly high in all the alteration zones, but it shows an anomalous value in the silicification zone. Al₂O₃ concentration shows initial depletion in greisen zone with gradual increase away from the contact. MgO and FeO are higher in greisen zone than silicification and potassic zones. The potassic zone is characterized by the depletion of Na₂O and higher value of K₂O.
The common presence of topaz and fluorite as both primary and secondary minerals and fluorine-bearing micas suggest fluorine partitioning in substantial amount between granitic melt and coexisting aqueous fluid phase and higher HF activity during the evolution of hydrothermal fluid. The mutual relationship of the fluorine minerals (topaz and fluorite) in the different alteration zones suggests an increase in the Ca²⁺ activity and decrease of H+ activity during the fluid evolution from greisenization towards alkali-metasomatised granite and the fluid is assumed to change from low to high activity ratio of Ca²⁺/H+.     

Cosmogenic chlorine-36 production rates in terrestrial rocks

Chlorine-36 is produced in rocks exposed to cosmic rays at the earth surface through thermal neutron activation of ³⁵Cl, spallation of ³⁹K and ⁴⁰Ca, and slow negative moun capture by ⁴⁰Ca. We have measured the ³⁶Cl content of ¹⁴C-dated glacial boulders from the White Mountains in eastern California and in a ¹⁴C-dated basalt flow from Utah. Effective, time-intergrated production parameters were calculated by simultaneous solution of the ³⁶Cl production equations. The production rates due to spallation are 4160 ± 310 and 3050 ± 210 atoms ³⁶Cl yr⁻¹ mol⁻¹³⁹K and ⁴⁰Ca, respectively. The thermal neutron capture rate was calculated to be (3.07 ± 0.24) × 10⁵ neutrons (kg of rock)⁻¹ yr⁻¹. The reported values are normalized to sea level and high geomagnetic latitudes. Production of ³⁶Cl at different altitudes and latitudes can be estimated by appropriate scaling of the sea level rates. Chlorine-36 dating was performed on carbonate ejecta from Meteor Crater, Arizona, and late Pleistocene morainal boulders from the Sierra Nevada, California. Calculated ³⁶Cl ages are in good agreement with previously reported ages obtained using independent methods.     

A new find of lamproite dyke near Chintalapalle area,NW margin of the Cuddapah basin,eastern Dharwar craton,southern India

A singular outcrop of a lamproite dyke is located ~1.5 km south-west of Chintalapalle village at the NW margin of the Cuddapah basin, eastern Dharwar craton, southern India.. The dyke trends E-W and is emplaced within the granitic rocks belonging to the peninsular gneissic complex. The lamproite dyke has a porphyritic to weakly porphyritic texture comprising microphenocrysts of sanidine, and potassic richterite set in a groundmass rich in carbonate, and chlorite with rutile and titanate as accessory phases. This new occurrence of lamproite is located mid-way between the well-known Narayanpet kimberlite field towards the west and the Ramadugu and Vattikod lamproite fields in east. The Chintalapalle lamproite dyke, together with those from Vattikod, Ramadugu, Krishna and Cuddapah basin lamproite fields, constitute a wide spectrum of ultrapotassic magmatism emplaced in and around the Palaeo-Mesoproterozoic Cuddapah basin in southern India.     

Climate‐modulated sequence development in a tropical rift basin during the Late Palaeocene to Early Eocene super greenhouse Earth

Sequence developments in rift basins are considered to be influenced largely by tectonics and to a lesser extent by eustatic sea‐level and climate. Studies indicate that in passive margin basins, climate can mask the effects of tectonics and eustasy by modulating the sediment supply. It is, however, less understood how the sedimentary sequence in rift basins might respond to strong climatic fluctuations where tectonic pulses generate rapid accommodation space. Here a case study has been provided to assess the effect of climate vis à vis sea‐level and tectonics on sequence development in the Cambay rift basin, western India, during the Early Palaeogene (Late Palaeocene to Early Eocene) super greenhouse globe. Facies analysis of this shale–lignite sequence suggests deposition in a lagoon/bay, developed over the Deccan Trap basement. Detailed sequence stratigraphic analysis using basin‐wide representative composite sections, marker lignite seam, event bed and high‐resolution carbon isotope (δ¹³C) chemostratigraphy suggest an overall transgressive motif. Among the three prominent Early Eocene eustatic highstands, only the one at ca 53·7 Ma is expressed by the thickest coal accumulation throughout the basin. Expression of the other sequence stratigraphic surfaces is subdued and can be due to the overall finer grain size of the sediment or local variation in the subsidence rate at different fault‐controlled mini‐basins. Enigmatic presence of a maximum flooding surface coinciding with the 53·7 Ma climate event (Eocene Thermal Maximum 2), manifested by negative carbon isotope excursion, indicates possible influence of climate over and above tectonics in developing the rift sequence. Qualitative rainfall variation assessed using the magnitude of the carbon isotope excursion and pollen abundance show that a relatively dry/low precipitation climatic phase during the Eocene Thermal Maximum 2 hindered the siliclastic supply to the basin. Thus, it has been inferred that climate‐induced high siliciclastic supply possibly enhanced the autocyclic reorganization and hindered the development of the key sequence stratigraphic surfaces across the basin during climate extremes.     

Characterization of meteorological drought over a dryland ecosystem in north western India

Natural Hazards - Fatal landslides cause severe disasters to human lives and socioeconomic costs in China. In this study, the data non-seismically fatal landslides were collected between 2004 and...     

Impact of land cover change on land surface temperature: A case study of Spiti Valley

Land surface temperature(LST) is the skin temperature of the earth surface. LST depends on the amount of sunlight received by any geographical area. Apart from sun light, LST is also affected by the land cover, which leads to change in land surface temperature. Impact of land cover change(LCC) on LST has been assessed using Landsat TM5, Landsat 8 TIRS/OLI and Digital Elevation Model(ASTER) for Spiti Valley, Himachal Pradesh, India. In the present study, Spiti valley was divided into three altitudinal zones to check the pattern of changing land cover along different altitudes and LST was calculated for all the four land cover categories extracted from remote sensing data for the years of 1990 and 2015. Matrix table was used as a technique to evaluate the land cover change between two different years. Matrix table shows that as a whole, about 2,151,647 ha(30%) area of Spiti valley experienced change in land cover in the last 25 years. The result also shows vegetation and water bodies increased by 107,560.2 ha(605.87%) and 45 ha(0.98%), respectively. Snow cover and barren land decreased by 19,016.5 ha(23.92%) and 88,589(14.14%), during the study period. A significant increase has been noticed in vegetation amongst all land cover types. Minimum, maximum and mean LST for three altitudinal zones have been calculated. The mean LST recorded was 11℃ in 1990 but it rose by 2℃ and reached to 13℃ in 2015. Changes in LST were obtained for each land cover categories. The mean temperature of different land cover types was calculated by averaging value of all pixels of a given land cover types. The mean LST of vegetation, barren land, snow cover and water body increased by 6℃, 9℃, 1℃, and 7℃, respectively. Further, relationships between LST, Normalized Difference Snow Index(NDSI), and Normalised Difference Vegetation Index(NDVI) were established using Linear Regression.