A study of groundwater irrigation water quality in south-central Bangladesh: a geo-statistical model approach using GIS and multivariate statistics

Southern Bangladesh’s irrigation and drinking water is threatened by saline intrusion. This study aimed to establish an irrigation water quality index (IWQI) using a geostatistical model and multivariate indices in Gopalganj district, south-central Bangladesh. Groundwater samples were taken randomly (different depths) in two seasons (wet-monsoon and dry-monsoon). Hydrochemical analysis revealed groundwater in this area was neutral to slightly alkaline and dominating cations were Na⁺, Mg²⁺, and Ca²⁺ along with major anions Cl^? and HCO₃ ^?. Principal component analysis and Gibbs plot helped explain possible geochemical processes in the aquifer. The irrigation water evaluation indices showed: electrical conductivity (EC) >750 µS/cm, moderate to extreme saline; sodium adsorption ratio (SAR), excellent to doubtful; total hardness (TH), moderate to very hard; residual sodium bicarbonate, safe to marginal; Kelly’s ratio >1; soluble sodium percentage (SSP), fair to poor; magnesium adsorption ratio, harmful for soil; and IWQI, moderate to suitable. In addition, the best fitted semivariogram for IWQI, EC, SAR, SSP, and TH confirmed that most parameters had strong spatial dependence and others had moderate to weak spatial dependence. This variation might be due to the different origin/sources of major contributing ions along with the influence of variable river flow and small anthropogenic contributions. Furthermore, the spatial distribution maps for IWQI, EC, SSP, and TH during both seasons confirmed the influence of salinity from the sea; low-flow in the major river system was the driving factor of overall groundwater quality in the study area. These findings may contribute to management of irrigation and/or drinking water in regions with similar groundwater problems.     

Pb isotopic variability in the modern-Pleistocene Indus River system measured by ion microprobe in detrital K-feldspar grains

The western Himalaya, Karakoram and Tibet are known to be heterogeneous with regard to Pb isotope compositions in K-feldspars, which allows this system to be used as a sediment provenance tool. We used secondary ion mass spectrometry to measure the isotopic character of silt and sand-sized grains from the modern Sutlej and Chenab Rivers, together with Thar Desert sands, in order to constrain their origin. The rivers show a clear Himalayan provenance, contrasting with grains from the Indus Suture Zone, but with overlap to known Karakoram compositions. The desert dunes commonly show ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁶Pb/²⁰⁴Pb values that are much higher than those seen in the rivers, most consistent with erosion from Nanga Parbat. This implies at least some origin from the trunk Indus, probably reworked by summer monsoon winds from the SW, a hypothesis supported by bulk Nd and U-Pb zircon dating. Further data collected from Holocene and Pleistocene sands shows that filled and abandoned channels on the western edge of the Thar Desert were sourced from Himalayan rivers before and at 6-8 ka, but that after that time the proportion of high isotopic ratio grains rose, indicating increased contribution from the Thar Desert dunes prior to ∼4.5 ka when flow ceased entirely. This may be linked to climatic drying, northward expansion of the Thar Desert, or changes in drainage style including regional capture, channel abandonment, or active local Thar tributaries. Our data further show a Himalayan river channel east of the present Indus, close to the delta, in the Nara River valley during the middle Holocene. While this cannot be distinguished from the Indus it is not heavily contaminated by reworking from the desert. The Pb system shows some use as a provenance tool, but is not effective at demonstrating whether these Nara sediments represent a Ghaggar-Hakra stream independent from the Indus. Our study highlights an important role for eolian reworking of floodplain sediments in arid rivers such as the Indus.     

Groundwater chemistry and occurrence of arsenic in the Meghna floodplain aquifer,southeastern Bangladesh

Dissolved major ions and important heavy metals including total arsenic and iron were measured in groundwater from shallow (25–33 m) and deep (191–318 m) tube-wells in southeastern Bangladesh. These analyses are intended to help describe geochemical processes active in the aquifers and the source and release mechanism of arsenic in sediments for the Meghna Floodplain aquifer. The elevated Cl⁻ and higher proportions of Na⁺ relative to Ca²⁺, Mg²⁺, and K⁺ in groundwater suggest the influence by a source of Na⁺ and Cl⁻. Use of chemical fertilizers may cause higher concentrations of NH₄⁺ and PO₄³⁻ in shallow well samples. In general, most ions are positively correlated with Cl⁻, with Na⁺ showing an especially strong correlation with Cl⁻, indicating that these ions are derived from the same source of saline waters. The relationship between Cl⁻/HCO₃⁻ ratios and Cl⁻ also shows mixing of fresh groundwater and seawater. Concentrations of dissolved HCO₃⁻ reflect the degree of water–rock interaction in groundwater systems and integrated microbial degradation of organic matter. Mn and Fe-oxyhydroxides are prominent in the clayey subsurface sediment and well known to be strong adsorbents of heavy metals including arsenic. All five shallow well samples had high arsenic concentration that exceeded WHO recommended limit for drinking water. Very low concentrations of SO₄²⁻ and NO₃⁻ and high concentrations of dissolved Fe and PO₄³⁻ and NH₄⁺ ions support the reducing condition of subsurface aquifer. Arsenic concentrations demonstrate negative co-relation with the concentrations of SO₄²⁻ and NO₃⁻ but correlate weakly with Mo, Fe concentrations and positively with those of P, PO₄³⁻ and NH₄⁺ ions.     

博斯腾湖流域绿洲农田土壤重金属污染及潜在生态风险评价

新疆博斯腾湖流域绿洲采集195个农田土壤样品,测定其中As、Cd、Cr、Cu、Mn、Ni、Pb和Zn等8种重金属元素的含量,基于地统计法分析农田土壤重金属空间分布规律,采用污染负荷指数（PLI）和潜在生态风险指数（RI）评价农田土壤重金属污染和潜在生态风险程度,并对重金属的来源进行讨论。结果表明：① 博斯腾湖流域农田土壤Cd、Cr、Cu、Ni、Pb和Zn含量平均值分别超出新疆土壤背景值的1.67倍、1.13倍、1.15倍、1.29倍、2.11倍和1.65倍。② 农田土壤中8种重金属元素空间分布基本呈现岛状分布格局,各金属元素在部分区域出现高值区,表明研究区人类活动对农田土壤环境具有负面效应。③ 农田土壤Pb呈现中度污染,Cd、Cr、Cu、Ni和Zn轻度污染,Mn轻微污染,As无污染。农田土壤重金属污染负荷指数的平均值为1.09,呈现轻度污染态势。④ 各重金属元素单项生态风险指数平均值从大到小依次为：Cd、Ni、As、Cu、Pb、Cr、Zn。综合生态风险指数平均值为18.63,处于轻微生态风险态势。从生态风险程度的区域差异来看,各县生态风险指数从大到小依次为：和硕县、博湖县、焉耆县、和静县。⑤ 农田土壤Cr、Cu、Mn、Ni与Zn主要受到土壤地球化学成因的控制,As、Cd和Pb主要受到人类活动的影响。Cd与Pb是研究区主要的污染因子,研究区农田土壤中Cd与Pb污染必须关注。     

Natural disasters' influence on industrial growth,foreign direct investment,and export performance in the South Asian region of Belt and road initiative

Natural Hazards - The study was conducted to elaborate on the impact of two main components of natural disasters (Population affected and damages) on FDI, industrial growth, and export performance...     

End bearing capacity comparison of screw pile with straight pipe pile under similar ground conditions

In the present study, the end bearing capacity of screw and straight pipe pile under similar pile tip area and ground conditions were investigated. The effect of increasing overburden pressure was also considered in this research. Pile load tests on close-ended screw and straight pipe piles were conducted in the small scale. Dry Toyoura sand was used to develop the model ground. The sand was compacted at relative density of 70, 80 and 92 %. It was observed that in case of straight pipe pile, load settlement curve plunges downward without increase in load around settlement equals to 10 % of pile tip diameter, whereas in case of screw pile, the load settlement curve plunges around settlement equals to 15 % of pile tip diameter. Moreover, the screw piles having helix-to-shaft diameter ratio 2–4.1 showed 2–12 times higher end bearing capacity than straight pipe piles with similar pile shaft diameter. It was also observed from the test results that the end bearing capacity of single-helix screw pile was in average 16.25 % less than straight pipe pile with similar pile tip area and ground conditions irrespective of the effect of increasing overburden pressure.     

Transport phenomena in kaolinite clay: Molecular simulation,homogenization analysis and similitude law

Kaolinite is a common clay mineral. It is a nanomaterial with a platelet crystalline structure. In order to analyze the behavior of kaolinite, its microscopic structure and material properties must be specified correctly. A molecular dynamics (MD) simulation is used for determining the microscale properties of hydrated kaolinite, and these properties are introduced into a multiscale homogenization analysis (HA). We previously developed such an MD/HA technique to investigate seepage, diffusion, sorption and consolidation in bentonite clay (Proceedings of the Science Basis for Nuclear Waste Management, Davos, Switzerland, vol. XXI. Material Research Society: Warrendale, PA, 1997; 359–366; Eng. Geol. 1999; 54 :21–31; Eng. Geol. 2001; 60 :127–138; Coupled Thermo‐Hydro‐Mechanical‐Chemical Processes in Geo‐systems. Elsevier: Amsterdam, 2005; 457–464). We here apply the method to kaolinite clay to investigate the permeability, diffusion and related similitude law. The obtained results are supported by existing experimental data. Copyright © 2008 John Wiley & Sons, Ltd.     

Seismic resilience of retrofitted RC buildings

Existing buildings can be at a greater seismic risk due to non-conformance to current design codes and may require structural retrofitting to improve building performance. The performance of buildings is measured in terms of immediate consequences due to direct damage, but the continuing impacts related to recovery are not considered in seismic retrofit assessment. This paper introduces a framework of retrofit selection based on the seismic resilience of deficient buildings retrofitted with the conventional mitigation approaches. The assembly-based methodology is considered for the seismic resilience assessment by compiling a nonlinear numerical model and a building performance model. The collapse fragility is developed from the capacity curve, and the resulting social, economic, and environmental consequences are determined. The seismic resilience of a building is assessed by developing a downtime assessment methodology incorporating sequence of repairs, impeding factors, and utility availability. Five functionality states are developed for the building functionality given investigated time interval, and a functionality curve for each retrofit is determined. It is concluded that seismic resilience can be used as a performance indicator to assess the continuing impacts of a hazard for the retrofit selection.     

Electrical properties and geochemistry of carbonate rocks from the Qasr El‐Sagha Formation,El‐Faiyum,Egypt

Understanding petrographical, geochemical and electrical properties of rocks is essential for investigating minerals. This paper presents a study of the petrographical, geochemical and A.C. electrical properties of carbonate rock samples. The samples collected show six lithostratigraphic rock units. Electrical properties were measured using a non‐polarizing electrode at room temperature (～20°C) and a relative atmospheric humidity of ～50% by weight in the frequency range from 42 Hz to 5 MHz. The difference in electrical properties between the samples was attributed to the change in composition and texture between the samples. Electrical properties generally change with many factors (grain size, chemical composition, grain shape and facies). The dielectric constant decreases with frequency and increases with conductor composition. The conductivity increases with the increase of conductor paths between electrodes. Many parameters can contribute to the same result of the electrical properties. The main objective of the present study is to shed more light on the relation between the texture and geochemical composition of measured samples (carbonates that contain clays and quartz grains) through electrical laboratory measurements (conductivity and dielectric constant as a function of frequency).