Bombs behaving badly: unexpected trajectories and cooling of volcanic projectiles

We collected thermal infrared video of two explosive eruptions at Stromboli in June 2008 and manually traced the trajectories of 95 particles launched during two eruptions. We found that 10–15?% of the analyzed trajectories deviated from predicted curves due to collisions, causing one particle to travel horizontally more than twice as far as expected. Furthermore, we observed an oscillatory cooling behavior for the airborne pyroclasts, with a median period of 0.46?s. Measured cooling was typically much faster than model-predicted cooling with discrepancies of up to 40?% between measured cooling and theoretical modeling. We interpret the measured cooling curves as resulting from the spinning and twisting and tearing of particles during travel: the periodic re-exposing of the hotter core of the pyroclasts to the atmosphere may cause the observed oscillations, and the spinning may accelerate cooling by enhancing convective heat transfer. Current volcanic trajectory and cooling models do not account for projectile collisions, spinning, or tearing and can thus severely underestimate the maximum landing distance and cooling rates of large pyroclasts.     

Methods for reactive oxygen species (ROS) detection in aqueous environments

This review summarizes direct and indirect analytical methods for the detection and quantification of the reactive oxygen species (ROS): ¹O₂, O ₂ ^·? /HOO·, H₂O₂, HO·, and CO ₃ ^·? in aqueous solution. Each section briefly describes the chemical properties of a specific ROS followed by a table (organized alphabetically by detection method, i.e., absorbance, chemiluminescence, etc.) summarizing the nature of the observable (associated analytical signal) for each method, limit of detection, application notes, and reaction of the probe molecule with the particular ROS.     

Comparative Evaluation of Single‐Well LNAPL Tracer Testing at Five Sites

Light nonaqueous phase liquid (LNAPL) tracer testing is a technique used to directly measure LNAPL flow in situ and evaluate LNAPL mobility and recoverability. The test method consists of adding a fluorescent oil‐soluble tracer to LNAPL within a well, isolating small volumes of LNAPL with known tracer concentrations for use as in‐well calibration standards, and measuring the rate of tracer concentration decline in the well over time. The test measures LNAPL flux through the well, which is directly related to LNAPL mobility and recoverability in the surrounding formation. Test results for a total of 29 wells at five sites are presented. Results from LNAPL tracer testing were comparable to results obtained through other methods, and the method offers a time‐averaged result measured over a relatively long period, in ambient conditions, and reflects the influences of heterogeneity and hydraulic changes. In some cases, tracer concentration decline followed unexpected patterns, and these data have led to a better understanding of test assumptions, mechanisms influencing tracer distribution, and options to improve test execution and data interpretation. Method improvements developed over the course of the field studies included refinement of pre‐test screening of LNAPL fluorescence and improvements to measurement equipment. Overall, the field studies confirmed the technical validity and usefulness of the LNAPL tracing technique to support LNAPL mobility and recoverability assessments.     

Anthropogenic structures and the infiltration of natural benthos by invasive ascidians

Anthropogenic habitats such as marinas and docks are focal points for marine invasions, but relatively little is known about the infiltration of nearby natural habitats by these invaders. To address infiltration by four geographically widespread ascidian invaders, we used a two‐step approach: (i) a field survey with equitable sampling in adjacent artificial and natural habitats in British Columbia, Canada, and (ii) a literature review, to infer larger scale patterns across species’ introduced global ranges. Our field survey revealed differential distribution patterns among the four ascidians recorded, with infiltration of natural rocky habitats by two species, Botrylloides violaceus and Botryllus schlosseri. We did not record Didemnum vexillum or Styela clava in natural habitats, though they were both recorded on adjacent artificial structures. Globally, these ascidian species are predominantly found associated with anthropogenic habitats including floating docks, pilings and aquaculture installations, but they have infiltrated natural habitats in some areas of their introduced range. The factors contributing to infiltration of nearby natural benthic habitats remains unclear, but determining which mechanisms are important for encouraging or hindering the establishment and spread of nonindigenous species beyond artificial structures requires survey and experimental work beyond anthropogenic habitats. Such work will aid our understanding of marine introduction dynamics, invasiveness, and associated management implications.     

Satellite imaging coral reef resilience at regional scale. A case-study from Saudi Arabia

We propose a framework for spatially estimating a proxy for coral reef resilience using remote sensing. Data spanning large areas of coral reef habitat were obtained using the commercial QuickBird satellite, and freely available imagery (NASA, Google Earth). Principles of coral reef ecology, field observation, and remote observations, were combined to devise mapped indices. These capture important and accessible components of coral reef resilience. Indices are divided between factors known to stress corals, and factors incorporating properties of the reef landscape that resist stress or promote coral growth. The first-basis for a remote sensed resilience index (RSRI), an estimate of expected reef resilience, is proposed. Developed for the Red Sea, the framework of our analysis is flexible and with minimal adaptation, could be extended to other reef regions. We aim to stimulate discussion as to use of remote sensing to do more than simply deliver habitat maps of coral reefs.     

A bioindicator system for water quality on inshore coral reefs of the Great Barrier Reef

Responses of bioindicator candidates for water quality were quantified in two studies on inshore coral reefs of the Great Barrier Reef (GBR). In Study 1, 33 of the 38 investigated candidate indicators (including coral physiology, benthos composition, coral recruitment, macrobioeroder densities and FORAM index) showed significant relationships with a composite index of 13 water quality variables. These relationships were confirmed in Study 2 along four other water quality gradients (turbidity and chlorophyll). Changes in water quality led to multi-faceted shifts from phototrophic to heterotrophic benthic communities, and from diverse coral dominated communities to low-diversity communities dominated by macroalgae. Turbidity was the best predictor of biota; hence turbidity measurements remain essential to directly monitor water quality on the GBR, potentially complemented by our final calibrated 12 bioindicators. In combination, this bioindicator system may be used to assess changes in water quality, especially where direct water quality data are unavailable.     

Boring crustaceans damage polystyrene floats under docks polluting marine waters with microplastic

Boring isopods damage expanded polystyrene floats under docks and, in the process, expel copious numbers of microplastic particles. This paper describes the impacts of boring isopods in aquaculture facilities and docks, quantifies and discusses the implications of these microplastics, and tests if an alternate foam type prevents boring. Floats from aquaculture facilities and docks were heavily damaged by thousands of isopods and their burrows. Multiple sites in Asia, Australia, Panama, and the USA exhibited evidence of isopod damage. One isopod creates thousands of microplastic particles when excavating a burrow; colonies can expel millions of particles. Microplastics similar in size to these particles may facilitate the spread of non-native species or be ingested by organisms causing physical or toxicological harm. Extruded polystyrene inhibited boring, suggesting this foam may prevent damage in the field. These results reveal boring isopods cause widespread damage to docks and are a novel source of microplastic pollution.     

Rapid evaluation and damage assessment of instrumented highway bridges

This study focuses on the use of strong motion data recorded during earthquakes and aftershocks to provide a preliminary assessment of the structural integrity and possible damage in bridges. A system identification technique is used to determine dynamical characteristics and high‐fidelity first‐order linear models of a bridge from low level earthquake excitations. A finite element model is developed and updated using a genetic algorithm optimization scheme to match the frequencies identified and to simulate data from a damaging earthquake for the bridge. Here, two criteria are used to determine the state of the structure. The first criteria uses the error between the data recorded or simulated by the calibrated nonlinear finite element model and the data predicted by the linear model. The second criteria compares relative displacements of the structure with displacement thresholds identified using a pushover analysis. The use of this technique can provide an almost immediate, yet reliable, assessment of the structural health of an instrumented bridge after a seismic event. Copyright © 2011 John Wiley & Sons, Ltd.     

Probabilistic seismic hazard analysis for spatially distributed infrastructure

Two key issues distinguish probabilistic seismic risk analysis of a lifeline or portfolio of structures from that of a single structure. Regional analysis must consider the correlation among lifeline components or structures in the portfolio, and the larger scope makes it much more computationally demanding. In this paper, we systematically identify and compare alternative methods for regional hazard analysis that can be used as the first part of a computationally efficient regional probabilistic seismic risk analysis that properly considers spatial correlation. Specifically, each method results in a set of probabilistic ground motion maps with associated hazard‐consistent annual occurrence probabilities that together represent the regional hazard. The methods are compared according to how replicable and computationally tractable they are and the extent to which the resulting maps are physically realistic, consistent with the regional hazard and regional spatial correlation, and few in number. On the basis of a conceptual comparison and an empirical comparison for Los Angeles, we recommend a combination of simulation and optimization approaches: (i) Monte Carlo simulation with importance sampling of the earthquake magnitudes to generate a set of probabilistic earthquake scenarios (defined by source and magnitude); (ii) the optimization‐based probabilistic scenario method, a mixed‐integer linear program, to reduce the size of that set; (iii) Monte Carlo simulation to generate a set of probabilistic ground motion maps, varying the number of maps sampled from each earthquake scenario so as to minimize the sampling variance; and (iv) the optimization‐based probabilistic scenario again to reduce the set of probabilistic ground motion maps. Copyright © 2012 John Wiley & Sons, Ltd.     

High‐frequency sediment transport responses on a vegetated foredune

Wind flow and sand transport intensity were measured on the seaward slope of a vegetated foredune during a 16 h storm using an array of sonic anemometers and Wenglor laser particle counters. The foredune had a compound seaward slope with a wave‐cut scarp about 0.5 m high separating the upper vegetated portion from the lower dune ramp, which was bare of vegetation. Wind direction veered from obliquely offshore at the start of the event to obliquely onshore during the storm peak and finally to directly onshore during the final 2 h as wind speed dropped to below threshold. Sand transport was initially inhibited by a brief period of rain at the start of the event but as the surface dried and wind speed increased sand transport was initiated over the entire seaward slope. Transport intensity was quite variable both temporally and spatially on the upper slope as a result of fluctuating wind speed and direction, but overall magnitudes were similar over the whole length. Ten‐minute average transport intensity correlates strongly with mean wind speed measured at the dune crest, and there is also strong correlation between instantaneous wind speed and transport intensity measured at the same locations when the data are smoothed with a 10 s running mean. Transport on the beach for onshore winds is decoupled from that on the seaward slope above the small scarp when the wind angle is highly oblique, but for wind angles <45° from shore perpendicular some sand is transported onto the lower slope. Copyright © 2012 John Wiley & Sons, Ltd.