Cost-effective infrastructure in a multi-antenna telescope layout

The future Square Kilometre Array (SKA) radio telescope is an interferometer array that will use a variety of collector types, including approximately 2500 dishes distributed with separations up to a few thousand kilometres, and about 250 aperture array (AA) stations located within 200 km of the core. The data rates associated with each individual collector are vast: around 10 GBytes/s for each dish and 2 TBytes/s for an AA station. As each of these must be connected directly to a central correlator, designing a cost-effective cabling and trenching infrastructure presents a great engineering challenge. In this paper we discuss approaches to performing this optimisation. In graph theory, the concept of a minimum spanning tree (MST) is equivalent to finding the minimum total trench length joining a set of n arbitrary points in the plane. We have developed a set of algorithms which optimise the infrastructure of any given telescope layout iteratively, taking into consideration not only trenching but also cabling and jointing costs as well. Solutions for few example configurations of telescope layout are presented. We have found that these solutions depend significantly on the collectors’ output data rates. When compared to a “traditional” MST-based approach which minimises trenching costs only, our algorithms can further reduce total costs by up to 15–20%. This can influence greatly the SKA infrastructure related costs.     

Fluid regime and diamond formation in the reduced mantle: Experimental constraints

The composition and potential diamond productivity of C–O–H fluids that could exist in the reduced regions of the Earth’s upper mantle and in the mantles of Uranus and Neptune were studied in experiments at 6.3 GPa and 1400–1600 °C and durations of 15–48 h. Hydrogen fugacity in the fluid phase was controlled by the Mo–MoO₂ or Fe–FeO buffers, using a specially modified double-capsule method. The oxygen fugacity in the samples was controlled by adding different amounts of water, stearic acid, anthracene, and docosane to a graphite charge. At high P–T conditions, the degree of decomposition of the heavy hydrocarbons added to the charge was 99.9%. The composition of the fluids coexisting with graphite/diamond in the buffered experiments varied from H₂O  H₂ > CH₄ (at fO₂ somewhat lower than the “water maximum”) to H₂ > CH₄ > (C₂H₄ + C₂H₆)>C₃H₈ (in C–H system). In the C–H system the maximum concentrations of major species in the synthesized fluid were: H₂ = 79 mol.% and CH₄ = 21 mol.%. The composition of the H₂-rich fluids, which were synthesized at 6.3 GPa and 1400–1600 °C for the first time, differs considerably from that of the ultra-reduced CH₄-rich fluids stable at 2.0–3.5 GPa and 1000–1300 °C. Thermodynamic calculations of the reduced C–O–H fluids at the P–T conditions of the experiments revealed CH₄-rich compositions (CH₄  H₂ > (C₂H₄ + C₂H₆)>C₃H₈), which however drastically differed from the synthesized compositions. The rates of diamond nucleation and growth in the experiments depended on the fluid composition. Diamond crystallization had a maximum intensity in the pure aqueous fluids, while in the H₂-rich fluids no diamond formation was observed. Only metastable graphite precipitated from the ultra-reduced fluids. The type of the initial hydrocarbon used for the fluid generation did not affect this process.     

Carbon catalysed hydrogen exchange in petroleum source rocks

Exchange of carbon bound hydrogen has been observed when alkenes, saturated and aromatic hydrocarbons are heated at moderate temperatures on carbonaceous surfaces (activated carbon and coal). Isomerisation of alkenes and the formation of hydrogenated/dehydrogenated products from the saturated and aromatic reactants resulted. A suite of crude oils from the Carnarvon Basin (Western Australia) have been analysed with a view to comparing their relative abundances of structurally similar hydrocarbons. The consistent relationships between hydrocarbons in crude oils that are chemically related via hydrogenation/dehydrogenation reactions suggest that a hydrogen exchange process similar to that demonstrated in laboratory experiments occurs during crude oil formation in sedimentary rocks.     

GETEMME—a mission to explore the Martian satellites and the fundamentals of solar system physics

GETEMME (Gravity, Einstein??s Theory, and Exploration of the Martian Moons?? Environment), a mission which is being proposed in ESA??s Cosmic Vision program, shall be launched for Mars on a Soyuz Fregat in 2020. The spacecraft will initially rendezvous with Phobos and Deimos in order to carry out a comprehensive mapping and characterization of the two satellites and to deploy passive Laser retro-reflectors on their surfaces. In the second stage of the mission, the spacecraft will be transferred into a lower 1500-km Mars orbit, to carry out routine Laser range measurements to the reflectors on Phobos and Deimos. Also, asynchronous two-way Laser ranging measurements between the spacecraft and stations of the ILRS (International Laser Ranging Service) on Earth are foreseen. An onboard accelerometer will ensure a high accuracy for the spacecraft orbit determination. The inversion of all range and accelerometer data will allow us to determine or improve dramatically on a host of dynamic parameters of the Martian satellite system. From the complex motion and rotation of Phobos and Deimos we will obtain clues on internal structures and the origins of the satellites. Also, crucial data on the time-varying gravity field of Mars related to climate variation and internal structure will be obtained. Ranging measurements will also be essential to improve on several parameters in fundamental physics, such as the Post-Newtonian parameter ?? as well as time-rate changes of the gravitational constant and the Lense-Thirring effect. Measurements by GETEMME will firmly embed Mars and its satellites into the Solar System reference frame.     

Babbling brook to thunderous torrent: Using sound to monitor river stage

The passive, ambient sound above the water from a river has previously untapped potential for determining flow characteristics such as stage. Measuring sub-aerial sound could provide a new, efficient way to continuously monitor river stage, without the need for in-stream infrastructure. Previous published work has suggested that there might be a relationship between sound and river stage, but the analysis has been restricted to a narrow range of flow conditions and river morphologies. We present a method to determine site suitability and the process of how to record and analyse sound. Data collected along a 500 m length of the River Washburn during July 2019 is used to determine what makes a site suitable for sound monitoring. We found that sound is controlled by roughness elements in the channel, such as a boulder or weir, which influences the sound produced. On the basis of these findings, we collect audio recordings from six sites around the northeast of England, covering a range of flow conditions and different roughness elements, since 2019. We use data from those sites collected during storms Ciara and Dennis to produce a relationship between this sound and river stage. Our analysis has shown a positive relationship between an R² of 0.73 and 0.99 in all rivers, but requires careful site selection and data processing to achieve the best results. We introduce a filter that is capable of isolating a river's sound from other environmental sound. Future work in examining the role of these roughness elements is required to understand the full extent of this technique. By demonstrating that sound can operate as a hydrometric tool, we suggest that sound monitoring could be used to provide cost-effective monitoring devices, either to detect relative change in a river or, after more research, a reliable stage measurement.     

Thermal evolution of an ancient subduction interface revealed by Lue Hf garnet geochronology,Halilba■? Complex(Anatolia)

The thermal structure of subduction zones exerts a major influence on deep-seated mechanical and chemical processes controlling arc magmatism, seismicity, and global element cycles. Accretionary complexes exposed inland may comprise tectonic blocks with contrasting pressureetemperature(Pe T)histories, making it possible to investigate the dynamics and thermal evolution of former subduction interfaces. With this aim, we present new Lue Hf geochronological results for mafic rocks of the Halilbag?Complex(Anatolia) that evolved along different thermal gradients. Samples include a lawsoniteeepidote blueschist, a lawsoniteeepidote eclogite, and an epidote eclogite(all with counter-clockwise Pe T paths),a prograde lawsonite blueschist with a "hairpin"-type Pe T path, and a garnet amphibolite from the overlying sub-ophiolitic metamorphic sole. Equilibrium phase diagrams suggest that the garnet amphibolite formed at w0.6 -0.7 GPa and 800 -850℃, whereas the prograde lawsonite blueschist records burial from 2.1 GPa and 420℃ to 2.6 GPa and 520℃. Well-defined Lue Hf isochrons were obtained for the epidote eclogite(92.38 ± 0.22 Ma) and the lawsoniteeepidote blueschist(90.19 ± 0.54 Ma),suggesting rapid garnet growth. The lawsoniteeepidote eclogite(87.30 ± 0.39 Ma) and the prograde lawsonite blueschist(ca. 86 Ma) are younger, whereas the garnet amphibolite(104.5 ± 3.5 Ma) is older.Our data reveal a consistent trend of progressively decreasing geothermal gradient from granulite-facies conditions at ~104 Ma to the epidote-eclogite facies around 92 Ma, and the lawsonite blueschist-facies between 90 Ma and 86 Ma. Three Lue Hf garnet dates(between 92 Ma and 87 Ma) weighted toward the growth of post-peak rims(as indicated by Lu distribution in garnet) suggest that the HP/LT rocks were exhumed continuously and not episodically. We infer that HP/LT metamorphic rocks within the Halilbag?Complex were subjected to continuous return flow, with "warm" rocks being exhumed during the tectonic burial of "cold" ones. Our results, combined with regional geological constraints, allow us to speculate that subduction started at a transform fault near a mid-oceanic spreading centre. Following its formation, this ancient subduction interface evolved thermally over more than 15 Myr, most likely as a result of heat dissipation rather than crustal underplating.     

Volunteered geographic information research in the first decade: a narrative review of selected journal articles in GIScience

ABSTRACT

More than 10 years have passed since the coining of the term volunteered geographic information (VGI) in 2007. This article presents the results of a review of the literature concerning VGI. A total of 346 articles published in 24 international refereed journals in GIScience between 2007 and 2017 have been reviewed. The review has uncovered varying levels of popularity of VGI research over space and time, and varying interests in various sources of VGI (e.g. OpenStreetMap) and VGI-related terms (e.g. user-generated content) that point to the multi-perspective nature of VGI. Content-wise, using latent Dirichlet allocation (LDA), this study has extracted 50 specific research topics pertinent to VGI. The 50 topics have been subsequently clustered into 13 intermediate topics and three overarching themes to allow a hierarchical topic review. The overarching VGI research themes include (1) VGI contributions and contributors, (2) main fields applying VGI, and (3) conceptions and envisions. The review of the articles under the three themes has revealed the progress and the points that demand attention regarding the individual topics. This article also discusses the areas that the existing research has not yet adequately explored and proposes an agenda for potential future research endeavors.