Asbestos and other fibrous minerals contained in the serpentinites of the Gimigliano-Mount Reventino Unit (Calabria,S-Italy)

Serpentinites are metamorphic rocks with good technological properties and valuable ornamental characteristics, which have been exploited since ancient times. Actually, their use is limited and monitored in several countries worldwide because they can contain fibrous asbestos minerals that may be carcinogenic. Furthermore, certain types of fibrous minerals can be confused with asbestos, and must therefore be carefully investigated. We have investigated the possible presence of the asbestos and non-asbestos fibrous phases contained in serpentinitic rocks in a meta-ophiolitic sequence from the Gimigliano-Mount Reventino Unit (Southern Italy), which had not been previously assessed. The detection and quantification of asbestos and the correct distinction of the fibrous non-asbestos minerals are very important not only from a scientific point of view, but also from a legislative one. This is especially the case for the administrative agencies that have to take decisions with regards to the implementation of public and occupational health protection measures (e.g., in road yards and quarry excavations). As a consequence of this, serpentinitic rock samples have been characterized in detail through X-ray powder diffraction, scanning and transmission electron microscopy combined with energy-dispersive spectrometry, analytical electron microscopy (SEM–EDS and TEM–AEM), differential scanning calorimetry, thermogravimetry and micro-Raman spectroscopy. Two kinds of asbestos and four kinds of non-asbestos fibrous silicates have been detected in the examined samples. In order of decreasing abundance these are polygonal serpentine, chrysotile, fibrous antigorite, tremolite, gedrite and magnesiohornblende. The size, morphology, crystallinity and chemical composition of the fibres were also discussed, in the light of the possible role these properties could play in the carcinogenic effect on human health.     

A one-dimensional viscoelastic and viscoplastic constitutive approach to modeling the delayed behavior of clay and organic soils

Accurate modeling of the time-dependent behavior of geomaterials is of great importance in a number of engineering structures interacting with soft, highly compressible clay layers or with organic clays and peats. In this work, a uniaxial constitutive model, based on Perzyna’s overstress theory and directly extendible to multiaxial stress conditions, is formulated and validated. The proposed constitutive approach essentially has three innovative aspects. The first concerns the implementation of two viscoplastic mechanisms within Perzyna’s theory in order to distinguish between short-term (quasi-instantaneous) and long-term plastic responses. Similarly, elastic response is simulated by combining an instantaneous and a long-term viscous deformation mechanism. The second innovative aspect concerns the use of a bespoke logarithmic law for viscous effects, which has never been used before to simulate delayed soil behavior (as far as the authors are aware). The third concerns the model’s extensive validation by simulating a number of different laboratory test results, including conventional and unconventional oedometer tests with small and large load increments/decrements and wide and narrow loading/unloading cycles, constant rates of stress and strain tests, and oedometer tests performed in a Rowe consolidation cell with measurement of pore pressure dissipation.     

A quantitative approach to the influence of pyrite separation on Cu-processing tailings: a case study at Reps,Mirdita district,Albania

Sulfide-rich tailings are a well-known environmental threat due to their production of acid drainage (AD) and release of potential toxic elements (PTE) to the local environment. The presence of heterogeneous materials produces complex environmental signatures and complicates the quantitative prediction of contamination. The present work provides a method of quantifying such heterogeneities, starting from mineral processing data of the Reps, Mirdita (Albania) site. A quantitative flow sheet (QF) method was applied to a selected dump site of the Mirdita copper mining district where secondary pyrite separation had been used in the past. The site is subject to long-lasting (10³ years) AD processes with significant release of PTE into the local environment. The tailings at the Reps site are divided into two classes based on the sulfide S content, respectively, represented by high-sulfide-content (S > 10 wt%) materials (hS) and low-sulfide-content (S < 3 wt%) material (lS). The reconstruction of the QF allowed us to identify the hS tailings as the discharge of single-flotation processing lines. This material accounts for about 82% of the total potential H₂SO₄ production, even though it represents < 20% of the entire tailing discard. The QF is a useful tool for the evaluation of heterogeneity and consequently for the modeling of waste management within abandoned sites and in working plants. Given a good quantification, heterogeneity can in fact support the setting of pyrite separation lines or the separate management of pyrite-rich tailing dumps.     

Zero carbon energy system pathways for Ireland consistent with the Paris Agreement

The Paris Agreement is the last hope to keep global temperature rise below 2°C. The consensus agrees to holding the increase in global average temperature to well below 2°C above pre-industrial levels, and to aim for 1.5°C. Each Party’s successive nationally determined contribution (NDC) will represent a progression beyond the party’s then current NDC, and reflect its highest possible ambition. Using Ireland as a test case, we show that increased mitigation ambition is required to meet the Paris Agreement goals in contrast to current EU policy goals of an 80–95% reduction by 2050. For the 1.5°C consistent carbon budgets, the technically feasible scenarios' abatement costs rise to greater than €8,100/tCO₂ by 2050. The greatest economic impact is in the short term. Annual GDP growth rates in the period to 2020 reduce from 4% to 2.2% in the 1.5°C scenario. While aiming for net zero emissions beyond 2050, investment decisions in the next 5–10 years are critical to prevent carbon lock-in.

Key policy insights

• Economic growth can be maintained in Ireland while rapidly decarbonizing the energy system.

• The social cost of carbon needs to be included as standard in valuation of infrastructure investment planning, both by government finance departments and private investors.

• Technological feasibility is not the limiting factor in achieving rapid deep decarbonization.

• Immediate increased decarbonization ambition over the next 3–5 years is critical to achieve the Paris Agreement goals, acknowledging the current 80–95% reduction target is not consistent with temperature goals of ‘well below’ 2°C and pursuing 1.5°C.

• Applying carbon budgets to the energy system results in non-linear CO₂ emissions reductions over time, which contrast with current EU policy targets, and the implied optimal climate policy and mitigation investment strategy.

     

The abandoned Pb-Zn mine of Ingurtosu, Sardinia (Italy)

The Ingurtosu Pb-Zn mine, situated in the southwestern part of Sardinia, has been in production from the beginning of the last century up to 1968. The orebody consists of galena/sphalerite/barite/siderite veins in Ordovician arenaceous and phyllitic sediments, near the contact with a Hercynian batholith.

Abundant tailings were collected in a pond from which they were discharged during the winter months into the sea via the Rio Naracauli stream. Today this area of outstanding scenic beauty, is degraded by tailings and waste rock scattered all along the stream.

Material derived from mining activities was studied for grain size, mineralogical and geochemical composition. The Rio Naracauli was sampled over a length of ten kilometers at regular intervals.

The results can be summarized as follows: (a) tailings contain a varying, but often quite high, percentage of Pb; lower percentages were found for Zn and Cd; (b) a sharp increase in dissolved Zn, Cd and Pb was observed in the Rio Naracauli where it leached the tailings; and (c) tailings and waste rocks should be recycled or revegetated.     

A novel insight into vertical ground motion modelling in earthquake engineering

Recent observations of failure and damage of buildings and structures under seismic action has led to an increasing interest for an in-depth analysis of the vertical component of site ground motion. In particular, when dealing with saturated soils, the current engineering practice does not usually go beyond the simplified $u$–$p$ formulation of the Biot's equations describing the coupled hydro-mechanical behaviour, thus neglecting some terms of fluid inertial forces, despite the presence of more refined formulations, for example, the $u$–$U$ formulation. Therefore, a theoretical and numerical validation of the $u$–$p$ formulation as compared with the $u$–$U$ formulation is proposed in this work, where the numerical simulations are compared with the analytical solution for the $u$–$p$ formulation, which is also derived and illustrated in this text. The comparison between the two formulations and the analytical solution is provided for different levels of permeability and dynamic actions, which are representative of a wide scenario of site ground properties and seismic hazard in the vertical direction. In particular, the soil response is analysed in terms of acceleration and pore pressure time history, frequency content, acceleration response spectrum, and amplification ratio of acceleration. This study extends the discussion of the limits of applicability of the $u$–$p$ formulation with respect to the rigorous solution of Biot's equations (obtained here with $u$–$U$ formulation) to the context of a complex dynamic regime provided by the vertical components of real earthquake records, and paves the way for further investigations.