Numerical study on the effects of floodplain vegetation on river planform style

The effects of floodplain vegetation on river planform have been investigated for a medium‐sized river using a 2D morphodynamic model with submodels for flow resistance and plant colonization. The flow resistance was divided into a resistance exerted by the soil and a resistance exerted by the plants. In this way it was possible to reproduce both the decrease in bed shear stress, reducing the sediment transport capacity of the flow within the plants, and the increase in hydraulic resistance, reducing the flow velocities. Colonization by plants was obtained by instantaneously assigning vegetation to the areas that became dry at low water stages. This colonization presents a step forward in the modelling of bank accretion. Bank erosion was related to bed degradation at adjacent wet cells. Bank advance and retreat were reproduced as drying and wetting of the computational cells at the channel margins. The model was applied to a hypothetical case with the same characteristics as the Allier River (France). The river was allowed to develop its own geometry starting from a straight, uniform, channel. Different vegetation densities produced different planforms. With bare floodplains, the river always developed a braided planform, even if the discharge was constant and below bankfull. With the highest vegetation density (grass) the flow concentrated in a single channel and formed incipient meanders. Lower vegetation density (pioneer vegetation) led to a transitional planform, with a low degree of braiding and distinguishable incipient meanders. The results comply with flume experiments and field observations reported in the literature.     

Oceanic influence on the sub-seasonal to interannual timing and frequency of extreme dry spells over the West African Sahel

Intra-seasonal drought episodes (extreme dry spells) are strongly linked to crop yield loss in the West African Sahel, especially when they occur at crop critical stages such as juvenile or flowering stage. This paper seeks to expose potentially predictable features in the sub-seasonal to inter-annual occurrence of “extreme dry spells” (extDS) through their links to sea surface temperature anomalies (SSTAs). We consider two kinds of extreme dry spells: more than 2 weeks of consecutive dry days following a rain event (often found at the beginning of the rainy season, after the first rain events) and more than a week (observed towards the end of the rainy season, before the last rain events). We extract dry spells from daily rainfall data at 43 stations (31 stations in Senegal over 1950–2010 and 12 stations in Niger over 1960–2000) to identify the intra-seasonal distribution of extDS and their significant correlation with local rainfall deficits. Seasonality of distribution and high spatial coherence are found in the timing and the frequency of occurrence of extDS in different rainfall regions over Niger and Senegal. The correlation between the regional occurrence index (ROI), necessary to capture the spatial extent of extDS, and observed global sea surface temperature anomalies (SSTAs) sheds light on the influence of the external factors on the decadal, interannual and sub-seasonal variability of extDS over the West African Sahel. When the global tropics and the Atlantic are warmer than normal, more coherent and delayed June–July extDS are observed after onset of rainy season, as well as early cessation type in August–September. When the Indo-Pacific is cooler and the equatorial south Atlantic is warmer than normal little to no extDS are found in the onset sub-period of the monsoon season. Mostly late types of extDS occur in October as a result of late cessation. These results show potential predictability of extreme dry spells after onset and before cessation of monsoonal rain based on global patterns of sea surface temperature anomalies.     

Influence of metal oxides in the colorimetric determination of acid volatile sulfide in sediments

The sediment of Lagoa dos Patos‐MS, Brazil, was investigated to verify the influence of metal sulfides and oxyhydroxides of Mn and Fe on the heavy metal availability. The spectrophotometric method of methylene blue was used, with 8 interlinked tubes containing the samples with SnCl₂, where N₂ was introduced to release the H₂S extracted with 6.0 mol L^–1 HCl, and trapped in 0.05 M NaOH solution. The influence of SO₄^2–, Mn(IV) and Fe(III) oxyhydroxides was investigated with samples constituted by a mixture of MnO₂; Na₂SO₄; FeCl₃, and sediments. The presence of SnCl₂ was very important to avoid the interferences of iron and manganese oxyhydroxides. The method of standard addition was applied and the efficiency was (100.8 ± 9.4)%. The ratio among the quantities of metals potentially available and the acid volatile sulfide (AVS) indicate that the system presents small metals availability to the benthic community, by the existence of sulfide capable to immobilize the metal as insoluble sulfide.     

Validation and fusion of different databases in preparation of high-resolution geoid determination

An up to date determination of a high-resolution geoid requires the use of best available databases concerning digital terrain model (DTM), bathymetry, global geopotential model and gravity field. The occasion to revisit methods to validate and merge different data sets has been created by a new project for the determination of a new European Geoid.
Since the computation of the latest European geoid and quasi-geoid model (EGG97), significant new or improved data sets have become available, such as new global geopotential models from CHAMP and GRACE missions, new national and global DTMs and new or upgraded gravity data sets.
In the context of the new European Gravity and Geoid Project (EGGP), within the IAG Commission 2, some data validation tests have been performed in the Italian zone.
In the area 19°× 17° wide, covering Italy, three kinds of tests have been performed: comparison among different DTMs in order to choose the best one to be used; comparisons in terms of geoid computation in some coastal areas, to evaluate bathymetry effects, and the validation of the EIGEN-CG01C and EIGEN-CG03C new global models up to degree and order 360.
These preliminary tests lead to the choice of SRTM DTM (integrated in no-data holes), with an added bathymetry derived by the Italian 1:25 000 official cartography near the coasts and the NOAA bathymetry in high seas. The validation of the new global models and the comparison with EGM96 model show that, in terms of geoid computation, the EGM96 yields better results. Moreover, the validation of new available land gravity data and the cross-validation of two sets of gravity data on sea have been completed.     

Intercomparison of Boron Isotope and Concentration Measurements. Part II: Evaluation of Results

The Istituto di Geoscienze e Georisorse (IGG), on behalf and with the support of the International Atomic Energy Agency (IAEA), prepared eight geological materials (three natural waters and five rocks and minerals), intended for a blind interlaboratory comparison of measurements of boron isotopic composition and concentration. The materials were distributed to twenty seven laboratories - virtually all those performing geochemical boron isotope analyses in the world -which agreed to participate in the intercomparison exercise. Only fifteen laboratories, however, ultimately submitted the isotopic and/or concentration results they obtained on the intercomparison materials. The results demonstrate that interlaboratory reproducibility is not well reflected by the precision values reported by the individual laboratories and this observation holds true for both boron concentration and isotopic composition. The reasons for the discrepancies include fractionations due to the chemical matrix of materials, relative shift of the zero position on the δ¹¹B scale and a lack of well characterized materials for calibrating absolute boron content measurements. The intercomparison materials are now available at the IAEA (solid materials) and IGG (waters) for future distribution.     

Al Huwaysah 010: The most reduced brachinite,so far

Al Huwaysah 010 is an ungrouped achondrite meteorite, recently referred to as a brachinite-like meteorite. This meteorite, showing a fine-grained assemblage of low-Ca pyroxene and opaque phases, is strongly reduced in comparison to other reduced brachinites. The occurrence of some tiny plates of graphite and oldhamite in this meteorite suggests that a partial melt residue has experienced a further reduction process. Olivine, the most abundant phase, is compositionally homogeneous (Fo_83.3) as well as the clinopyroxene (En_45.5Fs_10.8Wo_43.7) and the plagioclase (Ab_69.5). Orthopyroxene (En_85.4Fs_13.9Wo_0.7) also occurs but only in a fine intergrowth. Other accessory phases are Fe metal grains (Ni-free or Cr-bearing Fe-Ni alloy), troilite, chlorapatite, pentlandite (as inclusions in chromite). The sample shows two different closure temperatures: the highest (≈900°C) is determined via the olivine–chromite intercrystalline geothermometer and the lowest temperature (≈520°C) is determined via the pyroxene-based intracrystalline geothermometer. These temperatures may represent, respectively, the closure temperature associated with the formation and a subsequent impact event excavating the sample from the parental body. The visible to near-infrared (VNIR) reflectance spectra of Al Huwaysah 010 exhibit low reflectance, consistent with the presence of darkening components, and weak absorptions indicative of olivine and pyroxene. Comparing the spectral parameters of Al Huwaysah 010 to potential parent bodies characterized by olivine–pyroxene mineralogy, we find that it falls within the field previously attributed to the SIII type asteroids. These results lead us to classify the Al Huwaysah 010 meteorite as the most reduced brachinite, whose VNIR spectral features show strong affinities with those of SIII asteroids.     

New coring study in Augusta Bay expands understanding of offshore tsunami deposits (Eastern Sicily,Italy)

Tsunami deposits present an important archive for understanding tsunami histories and dynamics. Most research in this field has focused on onshore preserved remains, while the offshore deposits have received less attention. In 2009, during a coring campaign with the Italian Navy Magnaghi, four 1 m long gravity cores (MG cores) were sampled from the northern part of Augusta Bay, along a transect in 60 to 110 m water depth. These cores were taken in the same area where a core (MS06) was collected in 2007 about 2·3 km offshore Augusta at a water depth of 72 m below sea level. Core MS06 consisted of a 6·7 m long sequence that included 12 anomalous intervals interpreted as the primary effect of tsunami backwash waves in the last 4500 years. In this study, tsunami deposits were identified, based on sedimentology and displaced benthic foraminifera (as for core MS06) reinforced by X-ray fluorescence data. Two erosional surfaces (L1 and L2) were recognized coupled with grain-size increase, abundant Posidonia oceanica seagrass remains and a significant amount of Nubecularia lucifuga, an epiphytic sessile benthic foraminifera considered to be transported from the inner shelf. The occurrence of Ti/Ca and Ti/Sr increments, coinciding with peaks in organic matter (Mo incoherent/coherent) suggests terrestrial run-off coupled with an input of organic matter. The L1 and L2 horizons were attributed to two distinct historical tsunamis (ad 1542 and ad 1693) by indirect age-estimation methods using ²¹⁰Pb profiles and the comparison of Volume Magnetic Susceptibility data between MG cores and MS06 cores. One most recent bioturbated horizon (Bh), despite not matching the above listed interpretative features, recorded an important palaeoenvironmental change that may correspond to the ad 1908 tsunami. These findings reinforce the value of offshore sediment records as an underutilized resource for the identification of past tsunamis.     

Vertically stacked Gilbert-type deltas of Ventimiglia (NW Italy): The Pliocene record of an overfilled Messinian incised valley

Overfilled incised valleys develop when the rate of sediment supply outpaces the rate of accommodation. An overfilled incised valley presents simple or compound valley-fill architecture, depending on the depth of the valley incision, compared with the height reached by the following sea-level rise.The Ventimiglia incised valley, exposed on the Ligurian coast, north-western Mediterranean margin, presents a spectacular example of compound incised-valley fill, developed in perennial “overfill” conditions. The valley was subaerially incised during the Messinian Salinity Crisis and rapidly flooded by the sea at the beginning of Pliocene, then filled by eleven coarse-grained Gilbert-type deltas during Early–Middle Pliocene time.The basal Messinian unconformity is locally paved with subaerial scree breccias and bioclastic shallow-marine sandstones, and blanketed by bathyal marls. These deposits record the lowstand, transgressive and early-highstand systems tracts of the first valley-fill sequence. The subsequent progradation of Gilbert-type deltas occurred in four stages, or depositional sequences, separated by transgressive marine-marl intervals. Within each depositional sequence, the deltaic bodies display offlapping architecture, recording falling shoreline trajectory, downward shifts in facies, and overall forced regression. The water depth and accommodation in the inundated coastal valley was gradually decreasing with time. The reduced accommodation allowed the youngest deltas to prograde out to the shelf edge, triggering mass collapses and subsequent filling into the newly created slump scars. Some of the deltas probably acted as “canyon-perched deltas” and supplied sediment to the deep-water slope and floor of the Ligurian Basin.The vertical stacking of Gilbert-type deltas is usually attributed, in tectonically active basins, to fault-related subsidence pulses. In Ventimiglia, the accommodation was created by high-frequency eustatic sea-level rises that, probably accompanied by climate controlled reductions in sediment supply, temporarily outpaced uplift, leading to the development of multiple cycles of infill.     

Annual dynamics of the mesozooplankton communities in a highly variable ecosystem (North Adriatic Sea,Italy)

Mesozooplankton community composition at the species/taxa level was investigated from January to December 2001, at eight stations in the northern Adriatic Sea. Annual dynamics, taxonomic composition and spatial diversity in relation to different trophic conditions are discussed as related to previous studies and to different conditions, such as the presence of mucilage events. Zooplankton communities all over the northern sub‐basin were dominated by the cladoceran Penilia avirostris in summer, and by the calanoids Paracalanus parvus, Acartia clausi and the poecilostomatoids Oncaea spp. during the rest of the year. Whereas coastal communities were more variable with time and location, we were able to identify a group of offshore stations with a similar species/taxa composition and annual dynamics. Comparing the present results with previous studies, we observed significant changes in community composition in the time scale of 20 years, mostly due to a general decrease of A. clausi as the dominant species, being replaced by P. parvus. Also, P. avirostris swarms appear to have extended their temporal occurrence, and were present for longer periods of time when compared to past records. These changes might be related to the observed general increase of the average sea water temperature in the northern Adriatic Sea.     

Mapping and monitoring net primary productivity with AVHRR NDVI time-series: statistical equivalence of cumulative vegetation indices

In the last two decades, numerous investigators have proposed cumulative vegetation indices (i.e., functions which encode the cumulative effect of NDVI maximum value composite time-series into a single variable) for net primary productivity (NPP) mapping and monitoring on a regional to continental basis. In this paper, we investigate the relationships among three of the most commonly used cumulative vegetation indices, expanding on the definition of equivalence of remotely sensed vegetation indices for decision making. We consider two cumulative vegetation indices as equivalent, if the value of one index is statistically predictable from the value of the other index. Using an annual time-series of broad-scale AVHRR NDVI monthly maximum value composites of the island of Corsica (France), we show that the pairwise linear association among the analysed cumulative vegetation indices shows coefficients of determination (R²) higher than 0.99. That is, knowing the value of one index is statistically equivalent to knowing the value of the other indices for application purposes.