U—TAE算法提取城市热岛信息的空间尺度分析

U-TAE算法是一种使用不同范围的滑动窗口来提取城市热岛信息并根据稳健估计法设定窗口阈值的算法,该算法根据像元被记为热岛像元的累积总次数是否为0来区别热岛区与非热岛区,根据累积总次数的多少来判断热岛强度的强弱,具有动态阈值的特点和无偏特性。文章以长沙地区为例,对U-TAE算法在6个不同空间尺度上（5×5,11×11,25×25,51×51,101×101,201×201）对城市热岛信息提取的效果从提取范围、提取强度、空间构成以及大面积热岛提取稳定程度4个方面进行了评估。结果认为大小为11×11的窗口在4个方面均取得较好的效果,提取的城市热岛信息更加完整和有效。     

InSAR detection of residual settlement of an ocean reclamation engineering project: a case study of Hong Kong International Airport

Man-made land or islands that are reclaimed from the sea are suitable for building airports, harbors, and industry parks for material transportation because of their broad air and land spaces. However, the reclaimed foundation settlement process is of public concern, including the continuous impact of ocean processes on its stability. The majority of the buildings and facilities of Hong Kong International Airport (HKIA) are built on a reclaimed foundation. The reclaimed foundation has been in residual settlement since completion of the filling project in 1994. In this study, we use persistent scatterer interferometry (PSI) and ENVISAT (European Satellite) advanced synthetic aperture radar (ASAR) data to detect the residual settlement rates from 19 April 2006 to 9 January 2008. We use ground truth data to develop empirical correction models for correcting systematic biases in the ASAR PSI-detected settlement rates. The corrected data follow the Lorentz distribution well, implying that the residual settlement process is dominated by two modes or categories of settlement rates. The first category represents a relatively stable state and the second category represents a continuous settlement state. A ground settlement rate map of HKIA shows that an area of the Passenger Terminal Building and an area of the Southern Runway are two relatively stable areas. There are two major continuous settlement areas. One covers the airport Midfield. Another is along the coastline, implying that attention should be paid to impacts of ocean processes on the stability of airport foundations.     

Colluvial sedimentation in a hyperarid setting (Atacama Desert,northern Chile): Geomorphic controls and stratigraphic facies variability

Research on colluvial depositional systems has recently emphasized periglacial and high‐altitude settings, and the relations between Quaternary slope stratigraphy and climate change. This article examines the role of variable slope morphology, surface hydrology and microclimate in controlling colluvial sedimentation along a coastal tract of the hyperarid Atacama Desert in northern Chile. Direct accessibility of active surfaces is accompanied by uninterrupted stratigraphic exposures along the base of slopes, allowing direct comparisons between surface processes and the resulting sedimentary record. Four slope sectors are identified, based on differences in morphology and processes over active surfaces. Colluvial sedimentation is controlled by complex interactions of slope gradients and profiles, exposure to dominant winds, and potential runoff pathways, which vary considerably between different sectors. Major differences are evident between these hyperarid deposits and slope sedimentation in periglacial and temperate settings, including the complete absence of pedogenic activity and clay minerals; the volume of aeolian deposits and their role in controlling processes which redistribute sediment downslope, extending colluvial aprons; and the occurrence of runoff processes only where favoured by particular topographic configurations. Depositional surfaces range from steep talus cones, to debris‐flow‐dominated and aeolian‐dominated colluvial aprons, to an aeolian ramp subject to reworking by mass flows and flash floods. Consequently, facies associations and architectures at outcrop are highly variable and highlight the importance of spatial variations in slope morphology and processes in producing distinct, coeval colluvial stratigraphies within a single environmental context. Discrepancies between active processes and the corresponding stratigraphic signatures are also evident in some sectors; for example, preservation of alluvial and aeolian facies in stratigraphic sections does not always reflect the dominant processes over active slopes. Together with the spatial variability in processes and deposits along these slopes, this suggests that caution is required when extracting palaeoenvironmental information from analyses of colluvial successions.     

Landslides triggered by slipping-fault-generated earthquake on a plateau: an example of the 14 April 2010, Ms 7.1, Yushu, China earthquake

On 14 April 2010 at 07:49 (Beijing time), a catastrophic earthquake with Ms 7.1 struck Yushu County, Qinghai Province, China. A total of 2,036 landslides were interpreted from aerial photographs and satellite images, verified by selected field checking. These landslides cover about a total area of 1.194 km². The characteristics and failure mechanisms of these landslides are presented in this paper. The spatial distribution of the landslides is evidently strongly controlled by the locations of the main co-seismic surface fault ruptures. The landslides commonly occurred close together. Most of the landslides are small; there were only 275 individual landslide (13.5 % of the total number) surface areas larger than 1,000 m². The landslides are of various types. They are mainly shallow, disrupted landslides, but also include rock falls, deep-seated landslides, liquefaction-induced landslides, and compound landslides. Four types of factors are identified as contributing to failure along with the strong ground shaking: natural excavation of the toes of slopes, which mean erosion of the base of the slope, surface water infiltration into slopes, co-seismic fault slipping at landslide sites, and delayed occurrence of landslides due to snow melt or rainfall infiltration at sites where slopes were weakened by the co-seismic ground shaking. To analyze the spatial distribution of the landslides, the landslide area percentage (LAP) and landslide number density (LND) were compared with peak ground acceleration (PGA), distance from co-seismic main surface fault ruptures, elevation, slope gradient, slope aspect, and lithology. The results show landslide occurrence is strongly controlled by proximity to the main surface fault ruptures, with most landslides occurring within 2.5 km of such ruptures. There is no evident correlation between landslide occurrences and PGA. Both LAP and LND have strongly positive correlations with slope gradient, and additionally, sites at elevations between 3,800 and 4,000 m are relatively susceptible to landslide occurrence; as are slopes with northeast, east, and southeast slope aspects. Q₄ al-pl, N, and T₃ kn ¹ have more concentrated landslide activity than others. This paper provides a detailed inventory map of landslides triggered by the 2010 Yushu earthquake for future seismic landslide hazard analysis and also provides a study case of characteristics, failure mechanisms, and spatial distribution of landslides triggered by slipping-fault generated earthquake on a plateau.     

Suspended sediment load prediction of river systems: GEP approach

This study presents gene expression programming (GEP), an extension of genetic programming, as an alternative approach to modeling the suspended sediment load relationship for the three Malaysian rivers. In this study, adaptive neuro-fuzzy inference system (ANFIS), regression model, and GEP approaches were developed to predict suspended load in three Malaysian rivers: Muda River, Langat River, and Kurau River [ANFIS (R ²?=?0.93, root mean square error (RMSE)?=?3.19, and average error (AE)?=?1.12) and regression model (R ²?=?0.63, RMSE?=?13.96, and AE?=?12.69)]. Additionally, the explicit formulations of the developed GEP models are presented (R ²?=?0.88, RMSE?=?5.19, and AE?=?6.5). The performance of the GEP model was found to be acceptable compare to ANFIS and better than the conventional models.     

Decomposition and Evolution of Intracontinental Strike-Slip Faults in Eastern Tibetan Plateau

Little attention had been paid to the intracontinental strike-slip faults of the Tibetan Plateau. Since the discovery of the Longriba fault using re-measured GPS data in 2003, an increasing amount of attention has been paid to this neglected fault. The local relief and transverse swath profile show that the Longriba fault is the boundary line that separates the high and flat tomography of the Tibet plateau from the high and precipitous tomography of Orogen. In addition, GPS data shows that the Longriba fault is the boundary line where the migratory direction of the Bayan Har block changed from eastward to southeastward. The GPS data shows that the Longriba fault is the boundary fault of the sub-blocks of the eastern Bayan Har block. We built three-dimensional models containing the Longriba fault and the middle segment of the Longmenshan fault, across the Bayan Har block and the Sichuan Basin. A nonlinear finite element method was used to simulate the fault behavior and the block deformation of the Eastern Tibetan Plateau. The results show that the low resistivity and low velocity layer acts as a detachment layer, which causes the overlying blocks to move southeastward. The detachment layer also controls the vertical and horizontal deformation of the rigid Bayan Har block and leads to accumulation strain on the edge of the layer where the Longmenshan thrust is located. After a sufficient amount of strain has been accumulated on the Longmenshan fault, a large earthquake occurs, such as the 2008 Wenchuan earthquake. The strike slip activity of the Longriba fault, which is above the low resistivity and low velocity layer, partitions the lateral displacements of the Bayan Har block and adjusts the direction of motion of the Bayan Har block, from the eastward moving Ahba sub-block in the west to southeastward moving Longmenshan sub-block in the east.     

Assessment of chemical dispersant effectiveness in a wave tank under regular non-breaking and breaking wave conditions

Current chemical dispersant effectiveness tests for product selection are commonly performed with bench-scale testing apparatus. However, for the assessment of oil dispersant effectiveness under real sea state conditions, test protocols are required to have hydrodynamic conditions closer to the natural environment, including transport and dilution effects. To achieve this goal, Fisheries and Oceans Canada and the US Environmental Protection Agency (EPA) designed and constructed a wave tank system to study chemical dispersant effectiveness under controlled mixing energy conditions (regular non-breaking, spilling breaking, and plunging breaking waves). Quantification of oil dispersant effectiveness was based on observed changes in dispersed oil concentrations and oil-droplet size distribution. The study results quantitatively demonstrated that total dispersed oil concentration and breakup kinetics of oil droplets in the water column were strongly dependent on the presence of chemical dispersants and the influence of breaking waves. These data on the effectiveness of dispersants as a function of sea state will have significant implications in the drafting of future operational guidelines for dispersant use at sea.     

Dipping-interface Mapping Using Mode-separated Rayleigh Waves

Multichannel analysis of surface waves (MASW) method is a non-invasive geophysical technique that uses the dispersive characteristic of Rayleigh waves to estimate a vertical shear (S)-wave velocity profile. A pseudo-2D S-wave velocity section is constructed by aligning 1D S-wave velocity profiles at the midpoint of each receiver spread that are contoured using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. Based on the assumption that a dipping-layer model can be regarded as stepped flat layers, high-resolution linear Radon transform (LRT) has been proposed to image Rayleigh-wave dispersive energy and separate modes of Rayleigh waves from a multichannel record. With the mode-separation technique, therefore, a dispersion curve that possesses satisfactory accuracy can be calculated using a pair of consecutive traces within a mode-separated shot gather. In this study, using synthetic models containing a dipping layer with a slope of 5, 10, 15, 20, or 30 degrees and a real-world example, we assess the ability of using high-resolution LRT to image and separate fundamental-mode Rayleigh waves from raw surface-wave data and accuracy of dispersion curves generated by a pair of consecutive traces within a mode-separated shot gather. Results of synthetic and real-world examples demonstrate that a dipping interface with a slope smaller than 15 degrees can be successfully mapped by separated fundamental waves using high-resolution LRT.