Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.     

Variability in concentration of suspensates in an estuarine environment

Three data sets of suspensate concentrations, collected under different sampling plans, were analyzed to develop a minimal sampling period, consistent with a predetermined precision. Individual samples collected during any part of a given day were within ±50% of the daily average. In the main channel of the estuary, a monthly sampling scheme closely approximated a weekly pattern; however, seasonal sampling was unsatisfactory. Outside the main channel, weekly, monthly, and seasonal sampling patterns did not differ greatly. Variability in suspensate concentrations must be considered when calculating sediment flux in estuarine and coastal waters.     

A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.     

Optimum design of a servo-controlled breathing regulator for underwater divers

This article deals with the analysis, synthesis and performance evaluation of the flow and dynamic characteristics of the new class of servo-controlled breathing regulators for underwater divers.Emphasis on such a class of regulators has been stimulated by their tremendous potential in extending the dive depth and duration because they reduce the diver breathing effort to a great extent. This would eliminate the unnecessary exhaustion of the diver under such extreme diving conditions and accordingly improve his work efficiency underwater.The study aims at developing rational design procedures and guides that would enable the regulator designers to select the optimal design parameters of this class of regulators. Such design guides are based on the analysis of the flow and dynamic characteristics of the servo-controlled regulator as well as the basic principle of the theory of optimum control.The study presents also experimental evaluation techniques of the dynamic characteristics of this class of regulators in order to provide common quantitative means for comparison with the conventional regulator designs.The presented results emphasize the merits and the potential of the servo-controlled regulators as essential tools of supporting the life of divers underwater.     

Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.     

Sublethal effects of oiled sediment on the sand worm, Nereis (neanthes) virens: Induced changes in burrowing and emergence

The burrowing and emergence behavior of sand worms, Nereis (Neanthes) virens Sars, in sediment contaminated with sublethal concentrations of Prudhoe Bay crude oil ranging from 74 to 5222 ppm, was studied in the laboratory. Initial burrowing in oiled sediment did not differ from that observed in unoiled sediment. Emergence of exposed worms was related to the oil concentration and the extent of weathering of oiled sediment. Sand worms buried in unoiled sediment did not emerge. Worms dug from oiled sediment after 12 hours' exposure and placed on unoiled sediment were impaired, resulting in a significant increase in time to burrow. However, after 12h, they recovered and burrowed at normal rates. Worms held in oiled sediment for 96 h also recovered. Possible causes for recovery are discussed. Results suggest that oil-induced aberrations may increase vulnerability to predation.     

Plate boundaries and evolution of the Solomon Sea region

The Solomon Sea Plate was widely developed during late Oligocene, separating the proto-West Melanesian Arc from the proto-Trobriand Arc. Spreading in the Bismarck Sea and in the Woodlark Basin resulted from interaction between the Pacific and Australian Plates, specifically from the collision of the proto-West Melanesian Arc with north New Guinea, which occurred after arc reversal. This model explains the extensive Miocene, Pliocene, and Quaternary volcanism of the Papua New Guinea mainland as it related to southward subduction of the Trobriand Trough. Our interpreted plate motions are concordant with the geological evidence onshore and also with complex tectonic features in the Solomon Sea Basin Region.     

Magnitude-frequency relationship of coastal sand delivery by a southern California stream

Coastal sand delivery by a stream in southern California is estimated based on a numerical model which stimulates unsteady flow, sediment transport, and the associated channel adjustments for a stream-delta system. An average annual sediment yield of 51,400 m³/yr is estimated for the San Dieguito River, which drains a semiarid watershed controlled by dams. Of the total sand delivery by the stream, 20.5 percent is contributed from floods greater than the 100-year flood; 17.6 percent from those between the 50- and 100-year events; 28.4 percent from those between the 25- and 50 year floods; and 33.5 percent from those smaller than the 25-year flood.