Comparison of arsenic concentrations in simultaneously-collected groundwater and aquifer particles from Bangladesh,India, Vietnam,and Nepal

One of the reasons the processes resulting in As release to groundwater in southern Asia remain poorly understood is the high degree of spatial variability of physical and chemical properties in shallow aquifers. In an attempt to overcome this difficulty, a simple device that collects groundwater and sediment as a slurry from precisely the same interval was developed in Bangladesh. Recently published results from Bangladesh and India relying on the needle-sampler are augmented here with new data from 37 intervals of grey aquifer material of likely Holocene age in Vietnam and Nepal. A total of 145 samples of filtered groundwater ranging in depth from 3 to 36 m that were analyzed for As (1–1000 μg/L), Fe (0.01–40 mg/L), Mn (0.2–4 mg/L) and S (0.04–14 mg/L) are compared. The P-extractable (0.01–36 mg/kg) and HCl-extractable As (0.04–36 mg/kg) content of the particulate phase was determined in the same suite of samples, in addition to Fe(II)/Fe ratios (0.2–1.0) in the acid-leachable fraction of the particulate phase. Needle-sampler data from Bangladesh indicated a relationship between dissolved As in groundwater and P-extractable As in the particulate phase that was interpreted as an indication of adsorptive equilibrium, under sufficiently reducing conditions, across 3 orders of magnitude in concentrations according to a distribution coefficient of 4 mL/g. The more recent observations from India, Vietnam and Nepal show groundwater As concentrations that are often an order of magnitude lower at a given level of P-extractable As compared to Bangladesh, even if only the subset of particularly reducing intervals characterized by leachable Fe(II)/Fe >0.5 and dissolved Fe >0.2 mg/L are considered. Without attempting to explain why As appears to be particularly mobile in reducing aquifers of Bangladesh compared to the other regions, the consequences of increasing the distribution coefficient for As between the particulate and dissolved phase to 40 mL/g for the flushing of shallow aquifers of their initial As content are explored.     

Water supply problems in the Butana region-central Sudan with special emphasis on Jebel Qeili area

The Butana region of central Sudan is famous for its animal wealth and extensive pastures. Yet scarcity of water resources in the area especially during the dry seasons handicaps the proper utilization of these pastures. The area is occupied by non-water-bearing basement rocks and the only source of water is from direct run-off. Thus large numbers of small-size water reservoirs, haffirs, were constructed, but these are inadequate to provide enough water for the growing human and animal population. An all-year lake is here proposed to be constructed utilizing the ring-structure the Jebel Qeili igneous complex, central Butana. This lake is expected to solve the present water problem and meet the future demand of central Butana at the present rate of human and animal growth.     

Laboratory Investigation of the Influence of Geotextile on the Stress–Strain and Volumetric Change Behavior of Sand

This paper presents the results of triaxial tests conducted for the investigation of the influence of geotextile on both the stress–strain and volumetric change behavior of reinforced sands. Tests were carried out on loose sand. The experimental program includes drained compression tests on samples reinforced with different values of both geotextile layers (1 ≤ Ng ≤ 3) and confining pressure (\(\upsigma_{\text{c}}^{\prime }\)) varying from 50 to 200 kPa. Tests show that the contribution of geotextile is negligible until an axial strain threshold that range between 2.5% for a confining pressure of 50 kPa to lower than 1% for 100 and 200 kPa confining pressure. At higher values of ε_a, geotextile induces a quasi-linear increase in the stress deviator (q) and volume contraction in the reinforced sand. Tests show a negligible influence of the number of geotextile layers (Ng) on the contribution of geotextile to both stress–strain and volumetric change, when normalized with Ng. Tests also show that the contribution of geotextile to the stress–strain mobilization augments with the increase in the confining pressure, while its contribution to the volume contraction decreases with the increase in the confining pressure. The reinforced soil becomes contracting in the case of 2 and 3 geotextile layers.     

A new record and a new ichnospecies of Arachnostega from the Middle Miocene of Egypt

The ichnogenus Arachnostega Bertling, 1992 is recorded for the first time from a bioeroded, coral-rich, Middle Miocene limestone bed in the middle Siwa Escarpment Member (Marmarica Formation) at Siwa Oasis, northern Western Desert of Egypt. These burrowing traces are preserved on the surface of a few internal moulds of bivalves and gastropods. Until now, the ichnogenus Arachnostega included a single ichnospecies, A. gastrochaenae Bertling, 1992. In the material studied herein, two ichnospecies are identified, described, illustrated and compared with other, similar traces. One of these is a new ichnospecies of Arachnostega; this is here named A. siwaensis ichnosp. nov. It is distinguished from A. gastrochaenae in the possession of tunnels that usually branch in a V-pattern; intervals of ramification are longest in the main branch and decrease in second- and third-order branches. Arachnostega traces were produced in a warm, low-energy, shallow-marine (<10?m water depth) environment. Polychaetes are the most likely producers of marine Arachnostega, which are commonly occurred in the same studied bed. This new occurrence is significant in extending the known stratigraphical and geographical ranges of Arachnostega into the Middle Miocene of Egypt.     

Groundwater resources evaluation in calcareous limestone using geoelectrical and VLF-EM surveys (El Salloum Basin,Egypt)

Understanding and developing groundwater resources in arid regions such as El Salloum basin, along the northwestern coast of Egypt, remains a challenging issue. One-dimensional (1D) electrical sounding (ES), two-dimensional (2D) electrical resistivity imaging (ERI), and very low frequency electromagnetic (VLF-EM) measurements were used to investigate the hydrogeological framework of El Salloum basin with the aim of determining the potential for extraction of potable water. 1D resistivity sounding models were used to delineate geoelectric sections and water-bearing layers. 2D ERI highlighted decreases in resistivity with depth, attributed to clay-rich limestone combined with seawater intrusion towards the coast. A depth of investigation (DOI) index was used to constrain the information content of the images at depths up to 100 m. The VLF-EM survey identified likely faults/fractured zones across the study area. A combined analysis of the datasets of the 1D ES, 2D ERI, and VLF-EM methods identified potential zones of groundwater, the extent of seawater intrusion, and major hydrogeological structures (fracture zones) in El Salloum basin. The equivalent geologic layers suggest that the main aquifer in the basin is the fractured chalky limestone middle Miocene) south of the coastal plain of the study area. Sites likely to provide significant volumes of potable water were identified based on relatively high resistivity and thickness of laterally extensive layers. The most promising locations for drilling productive wells are in the south and southeastern parts of the region, where the potential for potable groundwater increases substantially.

     

Probabilistic seismic hazard of Pakistan, Azad-Jammu and Kashmir

The seismic hazard study for Pakistan and Azad Jammu and Kashmir has been conducted by using probabilistic approach in terms of peak ground acceleration (PGA) in m/s² and also seismic hazard response spectra for different cities. A new version of Ambraseys et al. (Bull Earthq Eng 3:1–53, 2005) ground acceleration model is used, and parameterization is based on most recent updated earthquake catalogs that consisted of 14,000 events. The threshold magnitude was fixed at M _w 4.8, but seismic zones like northern Pakistan–Tajikistan, Hindukush and northern Afghanistan–Tajikistan border had M _w 5.2. The average normalized ‘a’ and ‘b’ values for all zones are 6.15 and 0.95, respectively. Seismicity of study area was modeled, and ground motion was computed for eight frequencies (0.025, 0.1, 0.2, 0.5, 1.0, 1.5, 2.0, 2.5 s) for different annual exceedance rates of 0.02, 0.01, 0.005, 0.002 and 0.001 (return periods 50, 100, 200, 500 and 1,000 years) for stiff rocks at the gridding of 0.1° × 0.1°. Seismic hazard maps based on computed PGA for 0.02, 0.01 and 0.002 annual exceedance are prepared. These maps indicate the earthquake hazard of Pakistan and surrounding areas in the form of acceleration contour lines, which are in agreement with geological and seismotectonic characteristics of the study area. The maximum seismic hazard values are found at Muzaffarabad, Gilgit and Quetta areas.     

Caractérisation des paragenèses et des paléocirculations fluides dans l'indice d'or de Bleı̈da (Anti-Atlas,Maroc)Characterization of the paragenesis and the fluid palaeo-circulations in the gold showings of Bleida (Anti-Atlas,Morocco)

The gold showings at Bleida are hosted in Late Pan-African N50–80 °E quartz–hematite–chlorite 1 tension lenses that are related to the activity of major sinistral sub-east–west thrusts. Ores result from three superimposed stages of fluid migration. Gold occurs in microcracks offsetting the earlier minerals. Fluids evolved from COHN compositions with a saline component to boiling aqueous fluids. Pressure and temperature decreased from 50 MPa and 300 °C to less than 4 MPa and 150 °C. Thus, the gold showings at Bleida were formed in a typical geothermal (epithermal) setting, likely controlled by the Late Pan-African magmatism. To cite this article: A. Barakat et al., C. R. Geoscience 334 (2002) 35–41     

Electrical Resistivity Imaging technique to delineate coal seam barrier thickness and demarcate water filled voids

Exploration and exploitation of coal seams is one of the major resources for the energy sector in any country but at the same time water filled voids/water logged areas in the old workings of these seams are very critical problems for the coal mining industry. In such situations, disasters like inundation, landslides, collapsing of the old seams may occur. In this regard, it is necessary to find out the water saturated/water filled voids and zones in the mining areas. Since no established technique is available to find such zones, an experimental study using Electrical Resistivity Imaging (ERI) has been carried out in one of the coal mining areas near Dhanbad, to find out the feasibility of finding the barrier thickness and the water logged area in underground coal mines. The area under study forms part of Jharia coalfield in Dhanbad district, Jharkhand state. The coal bearing rocks of Barakar Formation of Lower Permian age (Gondwana period) occur in the area under a thin cover (10 m to15 m) of soil and or alluvium. Coal bearing Barakar Formations consist mainly of sandstone of varying grain size, intercalation of shale and sandstone, grey and carbonaceous-shale and coal seams. Since the water saturation reduces the resistivity of a formation to a large extent, water filled voids and old coal workings are expected to have significant resistivity contrast with the surrounding host rock. Hence, ERI technique was applied in such an environment as this technique uses high-density data acquisition both laterally and vertically by using multiple number of electrodes. Along with ERI, mise-à-la-masse (also called charged body) technique was also employed at one of the promising sites to find out the connectivity of water logged areas and also detection of these old workings from the surface measurements was analyzed. The interpreted 2D resistivity sections have clearly indicated the water bearing zone(s) along the profile which was well confirmed with the existing water level in the nearby borewells. On the other hand, this technique did not identify the size of the coal pillar and gallery (air filled voids), which might be due to the small size of the voids (i.e. about 2 m × 2 m) below a depth of 15m and more but have indicated altogether as a high resistive zone ranging from 600–1000 Ohm-m.     

Using GIS modeling to assess the agricultural sustainability in Kafr El-Sheikh governorate, Nile Delta, Egypt

The evaluation of agricultural sustainability status helps in identifying specific indicators that constrain the achievement of sustainable agriculture. The agricultural sector in Egypt is facing major sustainability constraints such as scarce land and water resources, environmental degradation, and rapid population growth as well as institutional arrangement including land tenure and farm fragmentation, agricultural administration, lack of infrastructure, and credit utilization and high interest rates. This study aims to evaluate the agricultural sustainability in some areas in Kafr El-Sheikh governorate, north of the Nile Delta; the international framework for evaluating sustainable land management was used for realizing this objective. The map of the physiographic soils of the studied area was produced depending upon Landsat ETM⁺ images analysis; the results indicate that the area includes three main landscapes, i.e., alluvial, lacustrine, and marine plains. The characteristics of productivity, security, protection, economic viability, and social acceptability in the different mapping units were assessed. The obtained results show that the studied area includes two different class types, the first are the lands that are marginally below the requirement of sustainability and the second are those lands that do not meet sustainability requirements. The former class is represented by the physiographic units of alluvial plain, whereas the latter class is represented by the physiographic units of the lacustrine and marine plains. The sustainability constrains in the studied area are related to the soil productivity, economic viability, and social acceptability.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.