Polycyclic aromatic hydrocarbon concentrations in urban soils representing different land use categories in Shanghai

An extensive soil survey was carried out in Shanghai to investigate the spatial distribution and possible sources of polycyclic aromatic hydrocarbons (PAHs) in urban soils. Soil samples were collected from highways, iron-smelting plants, steel-smelting plants, shipbuilding yards, coking plants, power plants, chemical plants, urban parks, university campuses and residential areas and were analyzed for 16 PAHs by gas chromatography with mass detection. High PAH concentrations were found in all locations investigated, with mean values of soil total PAH concentrations in the range 3,279–38,868 μg/kg DM, and the PAH concentrations were significantly influenced by soil organic matter content. Soil PAH profiles in all districts were dominated by PAHs with 4–6 rings. Principal components analysis and diagnostic ratios of PAHs indicate that they were mainly derived from coal combustion and petroleum but in soils from highways the PAHs were derived largely from vehicle exhaust emissions. The high concentrations of PAHs found indicate that many urban soils in Shanghai represent a potential hazard to public health.     

Transport in fracture processes: Fragmentation and slip

We present a new development in the asymmetric continuum theory with the shear oscillations (twist motions) and independent spin; these motions (displacement velocities and spin) can be shifted in phase to describe the independent rebound processes. Our approach provides an extension of the asymmetric continuum theory by including the microfragmentation processes with a double transport which may appear in an advanced fracture process under very high load. The related nonlinear equations, leading to soliton solutions, are derived.     

The Effect of Source Distribution on Bulk Scalar Transfer between a Rough Land Surface and the Atmosphere

We investigate the effect of source distribution on the bulk transfer of passive scalars between rough, vegetated land surfaces and the atmosphere, using data from a wind-tunnel experiment in which passive heat was emitted from both the underlying surface and canopy elements of a three-dimensional regular bluff-body array. The experimental results are compared with a simple one-dimensional, two-source model for scalar transfer. We find that: (1) the observed scalar transfer resistance across the boundary layer at the underlying surface is simply related to flat-plate theory by a constant of 0.62, despite the complexity of the turbulent flow within the wind-tunnel canopy; (2) one-dimensional gradient-transfer theory, even with extensions to account for the non-local nature of turbulent transfer within the canopy, does not describe the observed details of scalar concentration gradients in the highly three-dimensional canopy flow, but does provide a reasonable framework for bulk scalar transfer between the composite ground-canopy surface and the flow above the canopy; (3) the kB ⁻¹ parameter (which accounts for bulk excess resistance to scalar transfer over momentum transfer) is highly sensitive to scalar source partition between ground and canopy.     

Toward the understanding of the treatment of textile industries’ effluents by clay: adsorption of anionic dye on kaolinite

Clays, particularly kaolinite, are promising adsorbents for the treatment of textile effluents, but there is a need of better understanding the mechanisms of adsorption, especially in the case of anionic dyes. Thus, the removal of RR120 anionic dye was investigated using Tunisian raw clay (TBK) composed of kaolinite and illite, and a standard kaolinite (KGa-2), and conducting batch experiments by varying different parameters (contact time, ionic strength, concentration, temperature). We investigated the clays’ surface charges by electrophoretic mobility measures and the dye-clay interactions during adsorption, by the streaming-induced potentials (SIP). The results showed that KGa-2 has higher adsorption capacity for RR120 dye than TBK clay, moreover enhanced by increasing the ionic strength and/or lowering the pH of the aqueous. The SIP results showed an increase of negative charges for both clays, reflecting the adsorption of the anionic dye on the positive charges of the amphoteric surfaces of the clays. The SIP magnitudes indicated a higher adsorption rate for KGa-2 in accordance with the kinetic study. The Sips model that described the best adsorption isotherms indicates lateral interactions of the dye molecules, stronger in the case of KGa-2 than TBK. Also, the dye molecules form a thinner layer on KGa-2 surfaces. In addition, the dye molecule’s structure was not altered, as verified by mass spectrometry. The adsorption process was feasible and spontaneous and favored at ambient temperature. Thus, kaolinite-rich clays are effective in the removal of anionic dyes in aqueous solution and potential good adsorbents in wastewater treatment.     

<Emphasis Type="Italic">Deepwater Horizon</Emphasis> Oil Spill Impacts on Salt Marsh Fiddler Crabs (<Emphasis Type="Italic">Uca</Emphasis> spp.)

The Deepwater Horizon oil spill was the largest marine oil spill in US waters to date and one of the largest worldwide. Impacts of this spill on salt marsh vegetation have been well documented, although impacts on marsh macroinvertebrates have received less attention. To examine impacts of the oil spill on an important marsh invertebrate and ecosystem engineer, we conducted a meta-analysis on fiddler crabs (Uca spp.) using published sources and newly available Natural Resources Damage Assessment (NRDA) and Gulf of Mexico Research Initiative (GoMRI) data. Fiddler crabs influence marsh ecosystem structure and function through their burrowing and feeding activities and are key prey for a number of marsh and estuarine predators. We tested the hypothesis that the spill affected fiddler crab burrow density (crab abundance), burrow diameter (crab size), and crab species composition. Averaged across multiple studies, sites, and years, our synthesis revealed a negative effect of oiling on all three metrics. Burrow densities were reduced by 39 % in oiled sites, with impacts and incomplete recovery observed over 2010–2014. Burrow diameters were reduced from 2010 to 2011, but appeared to have recovered by 2012. Fiddler crab species composition was altered through at least 2013 and only returned to reference conditions where marsh vegetation recovered, via restoration planting in one case. Given the spatial and temporal extent of data analyzed, this synthesis provides compelling evidence that the Deepwater Horizon spill suppressed populations of fiddler crabs in oiled marshes, likely affecting other ecosystem attributes, including marsh productivity, marsh soil characteristics, and associated predators.     

Edge-to-Stem Variability in Wet-Canopy Evaporation From an Urban Tree Row

Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.     

A laboratory study on groundwater quality and mass movement occurrence

In this study, soil samples collected from the sides of two streams with high debris flow potential at Shenmu and Fengchiou village in Nantou County, Taiwan, were used for seepage tank tests in the laboratory. While the tests were being conducted, observations were made to investigate the relationships among displacement of the slope, quality of the seepage water and occurrence of mass movement. The results showed that according to the change rate, displacement could be divided into two stages, namely, the initial failure displacement stage and primary failure displacement stage. While the displacement of the slope was in primary failure displacement stages, the probability of slope failure became much higher. Before general slope failure, electrical conductivity (EC) and sulfate ion (SO₄ ²⁻) concentration of the seepage water increased significantly. The time when EC of the seepage water started to increase rapidly was much earlier than that when displacement of the slope started to increase significantly. Therefore, from the hazard mitigation view, there will be a longer time for response if EC of the seepage water was monitored.     

Landslide susceptibility mapping for a landslide-prone area (Findikli,NE of Turkey) by likelihood-frequency ratio and weighted linear combination models

Landslides are very common natural problems in the Black Sea Region of Turkey due to the steep topography, improper use of land cover and adverse climatic conditions for landslides. In the western part of region, many studies have been carried out especially in the last decade for landslide susceptibility mapping using different evaluation methods such as deterministic approach, landslide distribution, qualitative, statistical and distribution-free analyses. The purpose of this study is to produce landslide susceptibility maps of a landslide-prone area (Findikli district, Rize) located at the eastern part of the Black Sea Region of Turkey by likelihood frequency ratio (LRM) model and weighted linear combination (WLC) model and to compare the results obtained. For this purpose, landslide inventory map of the area were prepared for the years of 1983 and 1995 by detailed field surveys and aerial-photography studies. Slope angle, slope aspect, lithology, distance from drainage lines, distance from roads and the land-cover of the study area are considered as the landslide-conditioning parameters. The differences between the susceptibility maps derived by the LRM and the WLC models are relatively minor when broad-based classifications are taken into account. However, the WLC map showed more details but the other map produced by LRM model produced weak results. The reason for this result is considered to be the fact that the majority of pixels in the LRM map have high values than the WLC-derived susceptibility map. In order to validate the two susceptibility maps, both of them were compared with the landslide inventory map. Although the landslides do not exist in the very high susceptibility class of the both maps, 79% of the landslides fall into the high and very high susceptibility zones of the WLC map while this is 49% for the LRM map. This shows that the WLC model exhibited higher performance than the LRM model.     

Variability of ozone in the marine boundary layer of the equatorial Pacific Ocean

This study examines the processes controlling the diurnal variability of ozone (O₃) in the marine boundary layer of the Kwajalein Atoll, Republic of the Marshall Islands (latitude 8° 43′ N, longitude 167° 44′ E), during July to September 1999. At the study site, situated in the equatorial Pacific Ocean, O₃ mixing ratios remained low, with an overall average of 9–10 parts per billion on a volume basis (ppbv) and a standard deviation of 2.5 ppbv. In the absence of convective storms, daily O₃ mixing ratios decreased after sunrise and reached minimum during the afternoon in response to photochemical reactions. The peak-to-peak amplitude of O₃ diurnal variation was approximately 1–3 ppbv. During the daytime, O₃ photolysis, hydroperoxyl radicals, hydroxyl radicals, and bromine atoms contributed to the destruction of O₃, which explained the observed minimum O₃ levels observed in the afternoon. The entrainment of O₃-richer air from the free troposphere to the local marine boundary layer provided a recovery mechanism of surface O₃ mixing ratio with a transport rate of 0.04 to 0.2 ppbv per hour during nighttime. In the presence of convection, downward transport of O₃-richer tropospheric air increased surface O₃ mixing ratios by 3–12 ppbv. The magnitude of O₃ increase due to moist convection was lower than that observed over the continent (as high as 20–30 ppbv). Differences were ascribed to the higher O₃ levels in the continental troposphere and weaker convection over the ocean. Present results suggest that moist convection plays a role in surface-level O₃ dynamics in the tropical marine boundary layer.