An Elasto-Plastic Constitutive Model for Rock Joints Under Cyclic Loading and Constant Normal Stiffness Conditions

An elasto-plastic constitutive model is introduced for rock joints under cyclic loading, considering the additional shear resistance generated by the asperity damage in the first forward shear cycle and sliding mechanism for further shearing. A series of cyclic loading direct shear tests was conducted on artificial joints with triangular asperities and replicas of a real rock asperity surface under constant normal stiffness (CNS) conditions. The model was calibrated and then validated using selected data sets from the experimental results. Model simulations were found to be in good agreement with the rock joints behaviour under cyclic loading and CNS conditions both in stress prediction and dilation behaviour. In addition, dynamic stability analysis of an underground structure was carried out, using Universal Distinct Element Code and the proposed constitutive model.     

Complex impact assessment of coastal development in the United Arab Emirates using GIS: a case study of Wurayah Biosphere Reserve

Wadi Wurayah area is one of the major wadis originating and running on the Oman Mountains and drains into the Oman Gulf. These wadis in general and Wadi Wurayah in particular are characterized with a rich diversity of rare and mountainous and freshwater habitats and species. These wadis contain unequal, representative, and sensitive areas of the dry lands ecosystem with natural, outstanding landscapes and cultural heritage, while the socioeconomic situation indicates that it has enough socioeconomic infrastructures to develop new alternatives ecologically and economically sustainable. As most of the United Arab Emirates and the region, the study area is undergoing dramatic changes linked to economic diversification and promotion of tourism. Established under the UNESCO’s Man and the Biosphere Program, Wurayah Biosphere Reserve represents protected areas intended to demonstrate well-balanced relationship between conservation of biodiversity and an appropriate local development. The main objectives of this study are to develop an environmental information system to understand the dynamics of human activities associated to land use in the study area, highlight the threats to the environment, educate people about the basic environmental issues and positive traditional practices, and promote tourism. Based on the gained results, the concept of biosphere reserve as a model is to implement ideas of sustainable land use in practice.     

Engineering geology of Mokattam city and vicinity, eastern Greater Cairo, Egypt

A highly jointed, highly fossiliferous, vuggy and sandy dolomitic limestone, the Ain Musa Bed, is the foundation bed rock of Mokattam city. The slopes southwestern sides of the Upper Plateau of Gebel Mokattam, where the city was built, have been affected by slope failure and retreat of the edge of the and a road have been damaged. A 55 m slope retreat took place between 1956 and 1989. A field model is proposed for the slope failure in this area where foundation bed rock are removed by erosion after swelling and flowing, which is due to saturation by leaking fresh and sewage water. The resulting unde bed rock leads to slope failure of large blocks where vertical joints act as potential failure surfaces. Several recommendations are proposed to decrea failure in the city.

The Upper Plateau of Gebel Mokattam is underlain by limestones of the Middle Plateau where a new suburb is being built. A comparison between the geolog properties of the foundation bed rocks of the Upper and Middle Plateaux indicates that the limestones of the latter are more suitable foundation bed ro with expansive clays and are composed of hard, micritic limestones with a few megafossils and no cavities. Rock mass properties are also different and are stable.     

Hydrothermal alteration and evolution of Zr-Th-U-REE mineralization in the microgranite of Wadi Ras Abda,North Eastern Desert,Egypt

Ras Abda plutonic suite, North Eastern Desert of Egypt, consists predominantly of Neoproterozoic calc-alkaline older granites. Minor exposures of pink microgranite are occurring along Wadi Ras Abda within the older granites. Previous studies on this area demonstrated that the microgranite is altered in some parts and contains anomalous concentrations of rare metal elements (Zr, Th, and U). These altered and mineralized zones are re-assessed using field observations, chemical analysis, and by the application of various transmitted light and electron microscopic techniques. The rare metals exist as mineral segregation grew freely into open cavities of the microgranite and concordant with the NNE strike-slip fault movement. The mineralized zones contain an assemblage of secondary magnetite, zircon, uranothorite, columbite-(Mn), fergusonite-(Y), and allanite-(Ce). The extreme abundance of zircon in the mineralized zone, along with other evidence, indicates a hydrothermal origin of this zircon together with associated rare metals. The geochemical investigation and mass balance calculations revealed extreme enrichment of Zr, Th, U, Y, Nb, Ta, and REE. Post-magmatic hydrothermal alterations resulted in such pronounced chemical and mineralogical heterogeneity. The hydrothermal fluids are thought to be oxidizing, alkaline and of medium temperature (>?250 °C). The average contents of the elements Zr (1606 ppm), Th (1639 ppm), U (306 ppm), Nb (955 ppm), and REE (1710 ppm) in the mineralized microgranite reach sub-economic levels and could be a potential source of these elements.     

Biostratigraphy and seismic data analysis to detect the sequence stratigraphic depositional environment of the Miocene succession: Gulf of Suez (Egypt)

This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3).     

A New Equation for the Shear Strength of Cable Bolts Incorporating the Energy Balance Theory

The application of cable bolts as a secondary support system is an increasing trend in underground coal mines worldwide. The performances of cable bolts have been evaluated under both axial and shear loading conditions. Two methods of testing cables for shear, single and double shear, have been recognised. This paper examines the shear behaviour of a variety of cable bolts under different pre-tension loads by double shear testing. Plain, spiral and the combination of both cable types were used in this study. The initial axial load and the type of cable bolts are the main factors affecting their shear strength. By increasing the axial pre-tension load, the peak shear load occurs at lower shear displacement. The failure angle due to cable bending across the joint at different pre-tension loads varied between 41° and 49°. This demonstrates that the ratio of axial and perpendicular displacements is almost constant and on average the failure occurs at about 45°. A novel analytical model is proposed to evaluate the shear behaviour of pre-tensioned fully grouted cable bolts subjected to double shearing. Energy and Fourier Series methods were incorporated in the model to simulate the shear behaviour of cable bolts. The comparison of the experimental results with the proposed model shows a good agreement.     

Morphotectonic controls of groundwater flow regime and relating environmental impacts in Northwest Sinai,Egypt

The frequent appearance of some hydro-environmental hazard features, such as waterlogging and soil salinization along the susceptible zones at Northwest Sinai area (NWSA), has put serious challenges and obstacles for a correct and efficient land use planning of this region, for several decades. Although previous studies have shown that the whole region of Northern Sinai is greatly affected by the tectonic movements associated with the Syrian Arc folding system (SAS), NWSA is barren of any obvious surficial structures. The current work aims to investigate the effect of subsurface tectonic features on the hydrogeologic regime of NWSA.Hydrogeological and remote sensing data were integrated with ground geophysical gravity and magnetic measurements, using the geographic information system. Data integration asserts the role played by buried tectonic features not only in governing the landforms of the upper water-bearing quaternary formations but also in controlling their flow regime.Two major subsurface structures were identified through interpreting the geophysical measurements. A buried dome-like structure, dominating the central part of the mapped area, coincides with the radial flow pattern observed on the water table map. At the southwestern corner of the study area, an elevated groundwater level, caused by continuous groundwater accumulation at the discharge boundary, is superimposing a subsurface block-faulted depression. The waterlogging features (saturation of the soil by groundwater and inundation of local depressions due to rising of water table) dominating the discharge lowlands of NWSA support the conclusion that a buried block-faulted structure exerts a strong influence on the thickness and groundwater flow regime of the shallow quaternary aquifer.     

Isotopic,mineralogical, and thermobarometric variations of Al-Wahbah crater (Maklaa Tameya), Kishb area,Saudi Arabia

The Cenozoic volcanism of western Saudi Arabia extends from southern Yemen to Jordan northward. They cover an area of nearly 180,000 km². The rocks are dominated by alkali olivine basalts and olivine basalts. Al-Wahbah crater, a part of Harrat Kishb, represents a model occurrence to study the gneisses of these rocks. New mineral chemistry and isotopic data are presented. It aims to follow the isotopic, mineralogical, and thermobarometry variations among these volcanics. Amphiboles of the studied volcanics belong to the monoclinic calcic group. The chemistry of the amphibole crystals shows two ranges of pressure. They are 3.6–5.6 and 0.38–0.78 kbar. The Al_iv values of the amphiboles are in the range of 1.202 and 1.407, indicating corresponding temperature condition of 820–920 and 620–720 °C, respectively. The feldspar of the studied samples has the composition of plagioclase, though some grains have sanidine composition. They are formed in temperature range of 975 and 400 °C. The coexisting amphiboles and plagioclases indicate two sets of pressure and temperature. They are 540–575 °C (3.5–4 kbar) and 510–525 °C (~2 kbar), respectively. Rb–Sr isochron of the whole rock yields an age of 0.867 ± 0.160 Ma with initial Sr⁸⁷/Sr⁸⁶ of 0.702 ± 0.00086. The low initial ratio of Sr⁸⁷/Sr⁸⁶ together with positive values of εNd today implies that the studied volcanics have mantle source. Meanwhile, the present isotopic data suggest extraction of juvenile magma from asthenosphere source. The present study shows that the Al-Wahbah crater rocks belong to Cenozoic basalts and indicate EM-I-like signature.     

Adjoint formulation and constraint handling for gradient-based optimization of compositional reservoir flow

An adjoint formulation for the gradient-based optimization of oil–gas compositional reservoir simulation problems is presented. The method is implemented within an automatic differentiation-based compositional flow simulator (Stanford’s Automatic Differentiation-based General Purpose Research Simulator, AD-GPRS). The development of adjoint procedures for general compositional problems is much more challenging than for oil–water problems due to the increased complexity of the code and the underlying physics. The treatment of nonlinear constraints, an example of which is a maximum gas rate specification in injection or production wells, when the control variables are well bottom-hole pressures, poses a particular challenge. Two approaches for handling these constraints are presented—a formal treatment within the optimizer and a simpler heuristic treatment in the forward model. The relationship between discrete and continuous adjoint formulations is also elucidated. Results for four example cases of increasing complexity are presented. Improvements in the objective function (cumulative oil produced) relative to reference solutions range from 4.2 to 11.6 %. The heuristic treatment of nonlinear constraints is shown to offer a cost-effective means for obtaining feasible solutions, which are, in some cases, better than those obtained using the formal constraint handling procedure.