Measurement of a Peak in the Cosmic Microwave Background Power Spectrum from the North American Test Flight of Boomerang

We describe a measurement of the angular power spectrum of anisotropies in the cosmic microwave background (CMB) at scales of 0&fdg;3 to 5 degrees from the North American test flight of the Boomerang experiment. Boomerang is a balloon-borne telescope with a bolometric receiver designed to map CMB anisotropies on a long-duration balloon flight. During a 6 hr test flight of a prototype system in 1997, we mapped more than 200 deg(2) at high Galactic latitudes in two bands centered at 90 and 150 GHz with a resolution of 26&arcmin; and 16&farcm;5 FWHM, respectively. Analysis of the maps gives a power spectrum with a peak at angular scales of 1 degrees with an amplitude 70 μK(CMB).     

Hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) in riverine and estuarine sediments of the Pearl River Delta in southern China, with emphasis on spatial variability in diastereoisomer- and enantiomer-specific distribution of HBCD

Hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) were measured in surface sediments in the Pearl River Delta, southern China. The concentrations ranged from 0.06 to 304 ng/g dry weight for TBBPA and from 0.03 to 31.6 ng/g for total HBCD. The correlations between the TBBPA and HBCD concentrations were significant in rivers (Dongjiang, Zhujiang, Beijiang, and Dayanhe Rivers) with local input sources but not significant in the Xijiang River and Pearl River Estuary without local sources. HBCD was dominated by γ-HBCD (averaged 52.5-75.0%), whereas α-HBCD contributions were relatively high in sediments from the urban areas. The enantiomeric fractions of γ-HBCD in the sediments (averaged from 0.431 ± 0.035 to 0.479 ± 0.010) differed significantly from that in HBCD technical product except for samples from the e-waste area (Dayanhe River, 0.488 ± 0.091). This suggests that enantioselective biotransformation of HBCD occurs in the aquatic environment in this region.     

Ground water recharge and flow characterization using multiple isotopes

Stable isotopes of delta(18)O, delta(2)H, and (13)C, radiogenic isotopes of (14)C and (3)H, and ground water chemical compositions were used to distinguish ground water, recharge areas, and possible recharge processes in an arid zone, fault-bounded alluvial aquifer. Recharge mainly occurs through exposed stream channel beds as opposed to subsurface inflow along mountain fronts. This recharge distribution pattern may also occur in other fault-bounded aquifers, with important implications for conceptualization of ground water flow systems, development of ground water models, and ground water resource management. Ground water along the mountain front near the basin margins contains low delta(18)O, (14)C (percent modern carbon [pmC]), and (3)H (tritium units [TU]), suggesting older recharge. In addition, water levels lie at greater depths, and basin-bounding faults that locally act as a flow barrier may further reduce subsurface inflow into the aquifer along the mountain front. Chemical differences in ground water composition, attributed to varying aquifer mineralogy and recharge processes, further discriminate the basin-margin and the basin-center water. Direct recharge through the indurated sandstones and mudstones in the basin center is minimal. Modern recharge in the aquifer is mainly through the broad, exposed stream channel beds containing coarse sand and gravel where ground water contains higher delta(18)O, (14)C (pmC), and (3)H (TU). Spatial differences in delta(18)O, (14)C (pmC), and (3)H (TU) and occurrences of extensive mudstones in the basin center suggest sluggish ground water movement, including local compartmentalization of the flow system.     

A method for evaluating horizontal well pumping tests

Predicting the future performance of horizontal wells under varying pumping conditions requires estimates of basic aquifer parameters, notably transmissivity and storativity. For vertical wells, there are well-established methods for estimating these parameters, typically based on either the recovery from induced head changes in a well or from the head response in observation wells to pumping in a test well. Comparable aquifer parameter estimation methods for horizontal wells have not been presented in the ground water literature. Formation parameter estimation methods based on measurements of pressure in horizontal wells have been presented in the petroleum industry literature, but these methods have limited applicability for ground water evaluation and are based on pressure measurements in only the horizontal well borehole, rather than in observation wells. This paper presents a simple and versatile method by which pumping test procedures developed for vertical wells can be applied to horizontal well pumping tests. The method presented here uses the principle of superposition to represent the horizontal well as a series of partially penetrating vertical wells. This concept is used to estimate a distance from an observation well at which a vertical well that has the same total pumping rate as the horizontal well will produce the same drawdown as the horizontal well. This equivalent distance may then be associated with an observation well for use in pumping test algorithms and type curves developed for vertical wells. The method is shown to produce good results for confined aquifers and unconfined aquifers in the absence of delayed yield response. For unconfined aquifers, the presence of delayed yield response increases the method error.     

Paleobiology of the Mesoproterozoic-Neoproterozoic transition: the Sukhaya Tunguska Formation, Turukhansk Uplift, Siberia

Silicified carbonates of the latest Mesoproterozoic Sukhaya Tunguska Formation, northwestern Siberia, contain abundant and diverse permineralized microfossils. Peritidal environments are dominated by microbial mats built by filamentous cyanobacteria comparable to modern species of Lyngbya and Phormidium. In subtidal to lower intertidal settings, mat-dwelling microbenthos and possible coastal microplankton are abundant. In contrast, densely woven mat populations with few associated taxa characterize more restricted parts of tidal flats; the preservation of vertically oriented sheath bundles and primary fenestrae indicates that in these mats carbonate cementation was commonly penecontemporaneous with mat growth. Eoentophysalis mats are limited to restricted environments where microlaminated carbonate precipitates formed on or just beneath the sediment surface. Most microbenthic populations are cyanobacterial, although eukaryotic microfossils may occur among the simple spheroidal cells interpreted as coastal plankton. Protists are more securely represented by large (up to 320 micrometers in diameter) but poorly preserved acritarchs in basinal facies. The Sukhaya Tunguska assemblage contains 27 species in 18 genera. By virtue of their stratigraphic longevity and their close and predictable association with specific paleoenvironmental conditions, including substrates, Proterozoic cyanobacteria support a model of bacterial evolution in which populations adapt rapidly to novel environments and, thereafter, resist competitive replacement. The resulting evolutionary pattern is one of accumulation and stasis rather than the turnover and replacement characteristic of Phanerozoic plants and animals.     

Applications of a total dissolved gas pressure probe in ground water studies

Measurements of dissolved gases have numerous applications in ground water hydrology, and it is now possible to measure the total dissolved gas pressure in situ using a probe. Dissolved gas pressure is measured by submerging a headspace volume with a gas-permeable membrane, allowing dissolved gases in the water to equilibrate with gases in the headspace, then measuring the pressure in the headspace with a pressure transducer. Total dissolved gas pressure (TGP) probes have many potential uses in ground water studies employing dissolved gases, including: (1) determining approximate excess air levels, which may provide information about the time and location of recharge; (2) screening wells for air contamination, which can compromise the accuracy of dissolved gas tracer techniques: (3) detecting a trapped gas phase, which can significantly reduce hydraulic conductivity and impede the transport of dissolved solutes and gases; (4) enabling the use of gas-filled passive diffusion samplers for determining accurate dissolved gas concentrations; and (5) determining relative concentrations of CH4 and CO2 when they are known to be highly abundant. Although TGP probes designed for surface water have been available for several years, TGP probes suitable for ground water applications have only recently become available. Herein we present what are, to our knowledge, the first reported ground water dissolved gas data collected using a TGP probe. We also explain the basic operating principles of these probes and discuss the potential applications listed.