地震作用下智能相邻建筑的主动锚索控制

研究了应用主动锚索控制装置控制相邻建筑地震响应的有效性。首先，建立了主动锚索－相邻建筑系统的运动方程；然后应用广义振型分析方法，寻求了主动锚索联结的相邻建筑的力学特性，特别是振型阻尼比；最后，在频率域内应用广义振型分析与虚拟激励相结合的方法，建立了主动锚索控制装置联结相邻建筑的随机地震响应的分析方法。应用本文建立的公式，我们编制了计算机程序，进行了广泛的参数研究，以评价控制装置的有效性，并确定最优传感器类型及控制装置参数。研究表明，如果应用速度传感器，并能适当地选择主动锚索控制器的参数，则可以显著地提高系统的振型阻尼比，减小两个结构的地震响应。     

经验模分解及小波分析在结构损伤识别中的应用:试验研究

本文利用一个三层剪切型结构模型在各种激励下的振动台试验,研究经验模分解（empirical mode decomposition,EMD）和小波分析（wavelet analysis,WA）在结构损伤识别中的应用。研究针对结构刚度突然损失的损伤类型,并在试验中通过连接在模型两侧的弹簧的断裂来模拟。利用EMD和WA分析试验记录到的结构加速度信号来识别结构损伤发生的时刻和位置。试验结果表明,EMD和WA方法均可利用分解信号中的尖峰准确识别结构损伤发生的时刻,并利用信号尖峰在结构上的空间分布来确定损伤位置。研究表明,EMD和WA都是进行结构在线检测的良好方法。     

高科技厂房精密仪器工作平台的微振混合控制

车辆运行过程中引起的竖向地面微幅振动是影响高科技厂房精密仪器正常运行的重要因素。本文采用隔振与主动控制相结合的混合控制系统,以高科技厂房及精密仪器工作平台的有限元动力方程为基础,采用子优化控制方法建立了高科技厂房及精密仪器工作平台的分析模型,探讨了车辆运行所引起的高科技厂房精密仪器工作平台竖向微幅振动的混合控制分析方法。一座典型的三层高科技厂房的算例分析表明,采用混合控制方法能够有效地减小高科技厂房精密仪器工作平台的竖向微幅振动。     

Multi-hazard performance assessment of a transfer-plate high-rise building

Many urban areas are located in regions of moderate seismicity and are subjected to strong wind. Buildings in these regions are often designed without seismic provisions. As a result, in the event of an earthquake, the potential for damage and loss of lives may not be known. In this paper, the performance of a typical high-rise building with a thick transfer plate (TP), which is one type of building structure commonly found in Hong Kong, is assessed against both earthquake and wind hazards. Seismic- and wind-resistant performance objectives are fi rst reviewed based on relevant codes and design guidelines for high-rise buildings. After a brief introduction of wind-resistant design of the building, various methodologies, including equivalent static load analysis (ESLA), response spectrum analysis (RSA), pushover analysis (POA), linear and nonlinear time-history analysis (LTHA and NTHA), are employed to assess the seismic performance of the building when subjected to frequent earthquakes, design based earthquakes and maximum credible earthquakes. The effects of design wind and seismic action with a common 50-year return period are also compared. The results indicate that most performance objectives can be satisfi ed by the building, but there are some objectives, such as inter-story drift ratio, that cannot be achieved when subjected to the frequent earthquakes. It is concluded that in addition to wind, seismic action may need to be explicitly considered in the design of buildings in regions of moderate seismicity.     

GPS结构振动监测数据滤波方法及其性能实验研究

使用GPS监测结构振动的目的在于提取振动信号特征,但GPS观测量受多种误差源的影响,因此,选用合理的数据处理方法有效地分离各误差项,对于提高GPS的监测精度具有重要意义。将Vondrak滤波、小波滤波、自适应FIR滤波和卡尔曼滤波等四种方法应用于资料序列中振动信号的分离,通过对模拟振动实验观测资料的分析表明:运用滤波法可提高GPS测量微小动态变形和变频振动信号的检测能力;4种滤波法均能有效地提高GPS监测结构振动的精度,其中,Vondrak滤波和小波滤波的性能相当,且优于自适应FIR和卡尔曼滤波。同时,在对各滤波法参数选择的优缺点进行分析的基础上,提出不同情况下选择滤波器的建议。     

Dynamic performance of cable-stayed bridge tower with multi-stage pendulum mass damper under wind excitations --Ⅰ： Theory

In this paper, wind-induced vibration control of a single column tower of a cable-stayed bridge with a multi- stage pendulum mass damper （MSPMD） is investigated. Special attention is given to overcoming space limitations for installing the control device in the tower and the effect of varying natural frequency of the towers during construction. First, the finite element model of the bridge during its construction and the basic equation of motion of the MSPMD are introduced. The equation of motion of the bridge with the MSPMD under along-wind excitation is then established. Finally, a numerical simulation and parametric study are conducted to assess the effectiveness of the control system for reducing the wind-induced vibration of the bridge towers during construction. The numerical simulation results show that the MSPMD is practical and effective for reducing the along-wind response of the single column tower, can be installed in a small area of the tower, and complies with the time-variant characteristics of the bridge during its entire construction stage.     

被动及半主动摩擦阻尼器对合肥悲翠电视塔地震反应的 …

摩擦阻尼器是一种构造的耗能减振装置,已应用于国内外多座新建建筑的抗震设计和已建建筑的抗震加固。半主动摩擦阻尼器则通过调整阻尼器的起滑力来改善被动摩擦阻尼器的耗能减振性能。本文研究了被动及半主动摩擦阻尼器对于高耸塔架结构地震反应的减振效果。为满足摩擦阻尼器对高耸塔架结构风振控制的特殊需要,本文建立了合肥电视塔的空间桁架有限元模型和串联多自由度体系模型,并在形成控制力变换矩阵和计算摩擦阻尼器两端的相对     

Wind-induced vibration control of bridges using liquid column damper

The potential application of tuned liquid column damper (TLCD) for suppressing wind-induced vibration of long span bridges is explored in this paper. By installing the TLCD in the bridge deck, a mathematical model for the bridge-TLCD system is established. The governing equations of the system are developed by considering all three displacement components of the deck in vertical, lateral, and torsional vibrations, in which the interactions between the bridge deck, the TLCD, the aeroelastic forces, and the aerodynamic forces are fully reflected. Both buffeting and flutter analyses are carried out. The buffeting analysis is performed through random vibration approach, and a critical flutter condition is identified from flutter analysis. A numerical example is presented to demonstrate the control effectiveness of the damper and it is shown that the TLCD can be an effective device for suppressing wind-induced vibration of long span bridges, either for reducing the buffeting response or increasing the critical flutter wind velocity of the bridge.     

Dynamic performance of cable-stayed bridge tower with multi-stage pendulum mass damper under wind excitations—Ⅱ: Experiment

The possibility of using a multi-stage pendulum mass damper (MSPMD) to control wind-induced vibration of a single column tower of a cable-stayed bridge during construction was studied theoretically in part I of this work. In this paper, the performance of the MSPMD for reducing bridge tower vibration is studied experimentally. A MSPMD model and a tower model of the bridge with geometry scaling of 1:100 were designed and manufactured. Calibration of the MSPMD model with different wire lengths is conducted to verify the analytical model of the damper. A series of tests for the uncontrolled freestanding tower, tower with cables, and tower with MSPMD model are then performed under harmonic and white noise excitations. The experimental results show that the responses of the tower model signif icantly decrease with the installation of the MSPMD model, which demonstrates the effectiveness of the MSPMD to mitigate the vibration of the bridge tower.     

Road vehicle-induced vibration control of microelectronics facilities

A hybrid control platform is investigated in this paper to mitigate microvibrations to a group of vibration-sensitive equipment installed in a microelectronics facility subject to nearby road vehicle-induced horizontal and vertical ground motions. The hybrid control platform, on which microelectronics equipment is installed, is mounted on a building floor through a series of passive mounts and controlled by hydraulic actuators in both horizontal and vertical directions. The control platform is an elastic body with significant bending modes of vibration, and a sub-optimal control algorithm is used to manipulate the hydraulic actuators with actuator dynamics included. The finite element model and the equations of motion of the coupled platform-building system are then established in the absolute coordinate to facilitate the feedback control and performance evaluation of the platform. The horizontal and vertical ground vibrations at the base of the building induced by nearby moving road vehicles are assumed to be stationary random processes. A typical three-story microelectronics building is selected as a case study. The case study shows that the vertical vibration of the microelectronics building is higher than the horizontal. The use of a hybrid control platform can effectively reduce both horizontal and vertical microvibrations of the microelectronics equipment to the level which satisfies the stringent microscale velocity requirement specified in the Bolt Beranek & Newman (BBN) criteria.