Response of a two-layer ocean with a baroclinic current to a moving storm,part II

A circular storm moves with a constant speedc along a geostrophic flow similar to a western boundary current in the upper layer of a two-layer ocean with the motionless lower layer. The linear inertia terms are retained. Effects of the current becomes more conspicuous for smallerc and insignificant forc above 10 m s^–1. The inertia effects are manifested in cellular patterns of the interface perturbations with cell lengths of(c–vf ^–1 in a wake of the storm with a radius of an order of 100 km, wherev is the current velocity. On the left hand edge where the flow has a strong shear, the interface displacements have large amplitudes which increase with a distance along the path in a wake of the storm. These disturbances propagate to the left of the edge within an angle of cot^–1 (c ²/gH₀–1), whereg is the reduced gravity andH ₀ is the depth of the interface at the edge of the current. Comparison with the observations during Typhoon Trix in 1971 south of Japan suggests that fluctuations of the daily mean sea level with several days' periods observed along the southern coast of Japan may be due to the stationary oscillations of the Kuroshio caused by the inertia undulations along its left edge or due to the propagating perturbations to the left.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

Non-destructive monitoring of trace element levels in short-tailed albatrosses (Phoebastria albatrus) and black-footed albatrosses (Phoebastria nigripes) from Torishima Island, Japan using eggs and blood

Concentrations of 18 trace elements (V, Cr, Mn, Co, Cu, Zn, Se, Rb, Sr, Mo, Ag, Cd, Sb, Cs, Ba, Hg, Tl and Pb) were determined in abandoned eggs of short-tailed albatrosses and abandoned eggs and blood of black-footed albatrosses from Torishima Island, Japan in 2002. Mercury concentration was highest among the toxic elements in egg content of both the two species. In some egg contents of black-footed albatrosses, Hg concentrations were higher than the threshold level that may cause decreased hatchability and aberrant nesting behavior in some avian species. Concentrations of Cd in egg content and Ba in egg content and shell increased with an increase in egg breadth/length ratio, whereas Hg in egg content showed an opposite trend in black-footed albatrosses. Since egg breadth/length ratio is known to increase with the age of mother bird, this result may imply that concentrations of these elements in eggs vary with age of mother bird. In blood of black-footed albatross chicks, concentration of Hg was highest among the toxic elements and the Hg concentration showed an increase in the later growth stages. In contrast, concentration of Sr in blood decreased with growth stage. Since the behaviour of Sr is similar to that of Ca in animals, it is conceivable that Sr was used along with Ca for the formation of bone.     

Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.     

Zircon U–Pb ages of granitic and mafic dikes associated with granitoids and metamorphic rocks of the Ryoke Belt in the eastern Kii Peninsula,southwest Japan

Zircon U–Pb dates for felsic and intermediate to mafic dikes intruding into the Ryoke granitoids and metamorphic rocks at selected outcrops in the Takamiyama area of the eastern Kii Peninsula, southwest Japan, were determined along with their geology and petrography to reveal the history of Cretaceous magmatism. At each outcrop, the felsic and intermediate to mafic dikes exhibit specific structures that are indicative of magma intermingling and have coeval intrusion ages of ca. 81–77 Ma. Our zircon U–Pb data complement previously published data, suggesting that the mafic magmatism continued intermittently from 83 to 76 Ma in the Takamiyama area and that magmatism migrated eastward within the Ryoke Belt. A comparison of intrusion ages between a dike and a host Ryoke granitoid at one outcrop indicates that the host rock experienced ductile deformation at ~88 to ~83 Ma. Judging from the small number of zircons and the concordant date distributions, we didn't recognize the evidence suggesting the partial melting of the host rocks, as Nakajima et al. (Journal of the Geological Society of Japan, 2021, 127, 69–78) reported.