Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

Cambridge deep Ocean geophone

We describe recent mechanical andeelectronic modifications to the Cambridge Ocean Bottom Hydrophone system, enabling it to record in addition three geophone channels from a deployed, disposable geophone package. Examples of data from seismic refraction experiments show good correspondence between records of ground motion detected by the hydrophone and the vertical geophone. Seismic signals are undistorted by noise from instrument related sources. Clear examples of P to S conversions just below the receiver are observed. Improved recording conditions are achieved by deploying the geophones in a small pressure vessel as far away as possible from the main instrument package.     

Imbalance in the carbonate budget of surficial sediments in the North Atlantic Ocean: variations over the last millenium?

Fluxes contributing to the particulate carbonate system in deep-sea sediments were investigated at the BENGAL site in the Porcupine Abyssal Plain (Northeast Atlantic). Deposition fluxes were estimated using sediment traps at a nominal depth of 3000 m and amounted to 0.37±0.1 mmol C m⁻² d⁻¹. Dissolution of carbonate was determined using flux of total alkalinity from in situ benthic chambers, is 0.4±0.1 mmol C m⁻² d⁻¹. Burial of carbonate was calculated from data on the carbonate content of the sediment and sedimentation rates from a model age based on ¹⁴C dating on foraminifera (0.66±0.1 mmol C m⁻² d⁻¹). Burial plus dissolution was three times larger than particle deposition flux which indicates that steady-state is not achieved in these sediments. Mass balances for other components (BSi, ²¹⁰Pb), and calculations of the focusing factor using ²³⁰Th, show that lateral inputs play only a minor role in this imbalance. Decadal variations of annual particle fluxes are also within the uncertainty of our average. Long-term change in dissolution may contribute to the imbalance, but can not be the main reason because burial alone is greater than the input flux. The observed imbalance is thus the consequence of a large change of carbonate input flux which has occured in the recent past. A box model is used to check the response time of the solid carbonate system in these sediments and the time to reach a new steady-state is in the order of 3 kyr. Thus it is likely that the system has been perturbed recently and that large dissolution and burial rates reflect the previously larger particulate carbonate deposition rates. We estimate that particulate carbonate fluxes have certainly decreased by a factor of at least 3 and that this change has occurred during the last few centuries.     

Coping with disaster: Rehabilitating coastal livelihoods and communities

This paper examines lessons from past approaches to natural disasters, as well as early lessons from the post-2004 Asian tsunami rehabilitation, to draw out general principles for rehabilitating livelihoods in poor coastal communities. We contend that avoiding the mistakes of the past requires: (1) a framework for understanding the diversity of coastal people's livelihood strategies and the sources of their vulnerability, (2) a process for designing interventions that build on this understanding in order to strengthen and revitalize coastal communities, including a means of assessing and selecting the most promising livelihood options, and (3) a focus on the longer-term challenge of building future resilience and sustainability in the communities by addressing the root causes of vulnerability.     

The impact of natural hazards on the health sector in the Caribbean: Implications for health sector planning

In the last decade significant initiatives have been taken in the health sector with the view to better manage and respond to natural disaster emergencies. However, the recent hurricane disasters related to Hugo and Gilbert have highlighted many areas of health sector emergency planning still to be adressed. This paper briefly summarises the impact of recent natural disaster on the health sector in the Caribbean and comments on the performance of the sector during the emergencies. An effort is then made to detail what are the policy and programming issues to be tackled, if desired improvements are to be achieved.The reader may like to see GeoJournal vol. 23, no. 4 (April 1991) on Caribbean Hurricanes     

Molecular simulations of metal adsorption to bacterial surfaces

The atomic-scale interactions that occur between cations and the metal-binding cell wall components common to many gram-positive bacteria were investigated using molecular simulations techniques. We examined the adsorption of Cd and Pb onto peptidoglycan and teichoic acid components of the bacterial cell wall using classical energy force field methods. Within the framework of molecular mechanics and the Cerius² modeling software, we used energy minimization, conformational analysis, and molecular dynamics to examine the different components of the cell wall and to determine relative binding energies and structural configurations of the cell wall components, both with and without the metals present. Electronic structure calculations of representative metal-organic complexes validate the more practical classical methods required in simulating the large number of atoms associated with the cell wall components. The classical force field simulations were conducted in both gas phase and solvated periodic cells. Force field-based simulation techniques can adequately describe the interactions of Cd with the cell wall, defining both metal ion coordinations and binding distances. However, the classical force field approach is inconsistent in describing the observed Pb-cell wall interactions due to possible limitations in the force field parameters, the propensity for Pb to form hydroxides at circumneutral pH, or the dominance of other adsorption mechanisms.     

Anthropogenic Impacts on Summer Precipitation in Central Arizona,U.S.A.

This article explores the possibility of urbanization‐ and irrigation‐induced increases in summer precipitation totals in central Arizona. Maximum precipitation impacts are hypothesized to occur downwind of the Phoenix area in the Lower Verde basin. Results from statistical tests indicate that summer precipitation totals in the Lower Verde basin are greater than totals in nearby basins. Precipitation totals in the basin also appear to be equivalent to totals at more monsoon‐impacted stations in eastern Arizona. While this research is preliminary, the results do provide encouraging evidence of the existence of anthropogenically enhanced summer precipitation in central Arizona.     

Climatic and environmental reconstructions based on fossil assemblages from middle devensian (Weichselian) deposits of the river Thames at south kensington, central London, UK

Fossiliferous silts within the Late Pleistocene Kempton Park Gravel, of the River Thames Valley, were exposed in 1980 during foundation works for the Ismaili Centre in South Kensington, London. The results of a multidisciplinary study of the geomorphology, sediments, fossil plants, vertebrates, molluscs, ostracods and insects are reported. The silts were deposited under two distinct climatic regimes; a lower unit accumulated when the climate was arctic and an upper when the temperatures were at least as warm as those of the present day. Both these units occupy the same channel system and are separated from one another by less than a metre of sediment, implying that the climatic change was probably sudden and intense. The strongest evidence for this climatic difference comes from a study of the Coleoptera, which show an almost complete replacement of the arctic element in the fauna by a suite of temperate species. Palaeotemperature reconstructions using the Mutual Climatic Range method, based on the coleopteran assemblages from the lower unit, suggest that the mean temperature of the warmest month was 9±2 °C and that of the coldest month −22±10 °C. For the upper unit the mean temperature of the warmest month had risen to about 17 °C and that of the coldest month to about −4 °C. The episode represented by the lower unit, with its arctic climate, had not previously been recognized in the Thames Valley. The fauna from the upper, temperate, unit is very similar to that from other sites in the Kempton Park Gravel, such as that from Isleworth, 10 km upriver, which, like the upper unit at the Ismaili Centre, was characterized by the virtual absence of trees. It would appear that in such cases this treelessness does not indicate cold conditions, equivalent to those of the modern tundra, but may instead result from a combination of ecological and temporal factors. The value of multidisciplinary studies in reaching such conclusions is emphasized.The temperate episode described here is correlated with the thermal maximum at the early part of the Upton Warren Interstadial Complex. An earlier suggestion, based on amino acid epimerization ratios, that the Upton Warren Interstadial correlates with Oxygen Isotope Sub-stage 5a is not supported by the data, which show no evidence of the forested environments that characterized this period in both Britain and the adjacent Continent. It is thought that the temperate deposits at the Ismaili Centre belong to the Middle (Pleniglacial), rather than the Early, Devensian (Weichselian) and are equivalent to Oxygen Isotope Stage 3.     

Analytical perspective on trace element species of interest in exploration

Analysis of soil and sediment samples, using selective extraction methods to distinguish different phases, is of particular interest in exploration geochemistry to locate deeply buried mineral deposits. There are various mechanisms of binding labile elements in the secondary environment, including physical and chemical sorption, precipitation, chelation and complexation. Phases present in soils and sediments which are likely to scavenge ‘free' elements include amorphous Mn and Fe oxides, the humic and fulvic components of humus, and clays. This paper reviews these forms of trace elements and the methods in current use to quantify them. Examples of precision data, both for control and survey samples, are given with respect to trace elements dissolved from the ‘soluble organic' component of humus, Mn oxides and amorphous Fe oxides. The high sensitivity of inductively coupled plasma mass spectrometry (ICP–MS) is required to measure accurately and precisely a large suite of trace elements, especially where only small fractions of elements are dissolved by such leaches as the commercially available Enzyme and MMI (Mobile Metal Ion) extractions. The relative standard deviations (RSD) obtained for 33 elements (e.g. Ag, Cd, In, I) in the standard reference sample (SRM), TILL-2, are in the range 0.5–8% for the hydroxylamine hydrochloride (NH₂OH·HCl) leach designed to extract hydrous Fe and Mn oxides. The corresponding RSDs for elements in the reactive Mn oxide phase extracted by the Enzyme leach are in the range 3–19% except for some trace elements at levels close to detection limit (e.g. Cd, Bi). The RSDs obtained for field duplicates are inferior to those for analytical replicates (i.e. sample splits), probably a reflection of different concentrations of the host phase. In one soil survey, the Fe extracted by a 0.25 M NH₂OH·HCl leach ranged conservatively from 0.2 to 1.7% whereas the Mn extracted by the Enzyme leach varied extensively, from 0.3 to >999 ppm. In contrast, precision, at 1–7% RSD, for field duplicates was found to be comparable with that for both analytical duplicates and the SRM, LKSD-4, for elements associated with the humic and fulvic component of humus samples sieved to <177 μm.