TK-350 stereo-scenes of the Zonguldak testfield in the north-west of Turkey have been analysed. The imagery had a base-to-height ratio of 0·52 and covered an area of 200 km × 300 km, with each pixel representing 10 m on the ground. Control points digitised from 1:25 000 scale topographic maps were used in the test. A bundle orientation was executed using the University of Hanover program BLUH and PCI Geomatica OrthoEngine AE software packages. Tests revealed that TK-350 stereo-images can yield 3D geopositioning to an accuracy of about 10 m in planimetry and 17 m in height. A 40 m resolution digital elevation model (DEM) was generated by the PCI system and compared against a reference DEM, which was derived from digitised contour lines provided by 1:25 000 scale topographic maps. This comparison showed that accuracy depends mainly on the surface structure and the slope of the local terrain. Root mean square errors in height were found to be about 27 and 39 m outside and inside forested areas, respectively. The matched DEM demonstrated a systematic shift against the reference DEM visible as an asymmetric shift in the frequency distribution. This is perhaps caused by the presence of vegetation and buildings. 相似文献
Landslides are common natural hazards in the seismically active North Anatolian Fault Zone of Turkey. Although seismic activity, heavy rainfall, channel incisions, and anthropogenic effects are commonly the main triggers of landslides, on March 17, 2005, a catastrophic large landslide in Sivas, northeastern of Turkey, the Kuzulu landslide, was triggered by snowmelt without any other precursor. The initial failure of the Kuzulu landslide was rotational. Following the rotational failure, the earth material in the zone of accumulation exhibited an extremely rapid flow caused by steep gradient and high water content. The Agnus Creek valley, where Kuzulu village is located, was filled by the earth-flow material and a landslide dam was formed on the upper part of Agnus Creek. The distance from the toe of the rotational failure down to the toe of the earth flow measured more than 1800 m, with about 12.5 million m3 of displaced earth material. The velocity of the Kuzulu landslide was extremely fast, approximately 6 m/s. The main purposes of this study are to describe the mechanism and the factors conditioning the Kuzulu landslide, to present its environmental impacts, and to produce landslide-susceptibility maps of the Kuzulu landslide area and its near vicinity. For this purpose, a detailed landslide inventory map was prepared and geology, slope, aspect, elevation, topographic-wetness index and stream-power index were considered as conditioning factors. During the susceptibility analyses, the conditional probability approach was used and a landslide-susceptibility map was produced. The landslide-susceptibility map will help decision makers in site selection and the site-planning process. The map may also be accepted as a basis for landslide risk-management studies to be applied in the study area. 相似文献
This study describes the parametric uncertainty of artificial neural networks (ANNs) by employing the generalized likelihood uncertainty estimation (GLUE) method. The ANNs are used to forecast daily streamflow for three sub-basins of the Rhine Basin (East Alpine, Main, and Mosel) having different hydrological and climatological characteristics. We have obtained prior parameter distributions from 5000 ANNs in the training period to capture the parametric uncertainty and subsequently 125,000 correlated parameter sets were generated. These parameter sets were used to quantify the uncertainty in the forecasted streamflow in the testing period using three uncertainty measures: percentage of coverage, average relative length, and average asymmetry degree. The results indicated that the highest uncertainty was obtained for the Mosel sub-basin and the lowest for the East Alpine sub-basin mainly due to hydro-climatic differences between these basins. The prediction results and uncertainty estimates of the proposed methodology were compared to the direct ensemble and bootstrap methods. The GLUE method successfully captured the observed discharges with the generated prediction intervals, especially the peak flows. It was also illustrated that uncertainty bands are sensitive to the selection of the threshold value for the Nash–Sutcliffe efficiency measure used in the GLUE method by employing the Wilcoxon–Mann–Whitney test. 相似文献
We investigated the relationships between mineral content and the physical and mechanical properties of landscape rock using a non-destructive remote sensing method applied in the laboratory. Using this technique, the spectral properties of the landscape rock could be collected at different wavelengths without harming the samples. Differences in spectral reflectance were compared with the physical and mechanical properties of the stone. Significant correlations were observed between reflectance values and the rocks’ mechanical and physical properties, with correlation coefficients of 95 to 99 %. However, establishing a correlation between two variables is not a sufficient condition to establish a causal relationship. Mineral densities and mineral content are characteristics used for the classification of landscape rock. We have concluded that although spectral signatures from landscape rock can be used for predicting which stones might have similar features when comparing two batches of stone, the high correlations we discovered cannot confirm a cause and effect relationship that would allow for the prediction of a rock’s physical and mechanical properties. Although this conclusion is disappointing, the mineral content and the significant correlations discovered by hyperspectral reflectance scanning can be used as supplementary information when comparing two samples of landscape rock. 相似文献
In this study, the geometric accuracy comparison of aerial photos and WorldView-2 satellite stereo image data is evaluated with the different number and the distribution of the ground control points (GCPs) on the basis of large scale map production. Also, the current situation of rivalry between airborne and satelliteborne imagery was mentioned. The geometric accuracy of Microsoft UltraCam X 45 cm ground sampling distance (GSD) aerial imagery and WorldView-2 data both with and without GCPs are also separately analyzed. The aerial photos without any GCP by only using global navigation satellite system (GNSS) and inertial measurement unit (IMU) data with tie points give an accuracy of ±1.17 m in planimetry and ±0.71 m in vertical that means nearly two times better accuracy than the rational polynomial coefficient (RPC) of stereo WorldView-2. Using one GCP affects the accuracies of aerial photos and WorldView-2 in different ways. While this situation distorts the aerial photo block, it corrects the shift effect of RPC in WorldView-2 and increases the accuracy. By using four or more GCPs, ½?pixel (~0.23 m) accuracy in aerial photos and 1 pixel (~0.50 m) accuracy in WorldView-2 can be achieved in horizontal. In vertical, aerial photos have 1 pixel (~0.55 m) and WorldView-2 has 1.5 pixels (~0.85 m) accuracy. These results show that Worldview-2 imagery can be used in the production of class I 1:5000 scale maps according to the ASPRS Accuracy Standards for Digital Geospatial Data in terms of geometric accuracy. It is concluded that the rivalry between aerial and satellite imagery will continue for some time in the future. 相似文献
A 6.8-magnitude earthquake that occurred on January 24, 2020, has been effective in Turkey’s eastern regions. The earthquake, with recorded peak ground acceleration (PGA) value of 0.292 g, caused the destruction or heavy damage of buildings, especially in the city center of Elaz?? province. The purpose of this paper was to share the results of detailed investigation in the earthquake-stricken area. Additionally, the causes of damages and failures observed in the buildings were compared to those that had occurred in previous earthquakes in Turkey. In this study, the damages observed in especially RC buildings as well as in masonry and rural buildings were summarized, the lessons learned were evaluated, and the results were interpreted with reference to Turkish earthquake codes. In the study, it was particularly emphasized why the building stock underwent such damage even though the buildings were exposed to earthquake acceleration well below the design acceleration values.
Pore flow velocity is assumed to be a nondivergence-free, unsteady, and nonstationary random function of space and time for ground water contaminant transport in a heterogeneous medium. The laboratory-scale stochastic contaminant transport equation is up scaled to field scale by taking the ensemble average of the equation by using the cumulant expansion method. A new velocity correction, which is a function of mean pore flow velocity divergence, is obtained due to strict second order cumulant expansion (without omitting any term after the expansion). The field scale transport equations under the divergence-free pore flow velocity field assumption are also derived by simplifying the nondivergence-free field scale equation. The significance of the new velocity correction term is investigated on a two dimensional transport problem driven by a density dependent flow. 相似文献