The landslides threatening Tasova town (Central Anatolia, Turkey) and their environmental impacts

There exist a number of landslides along the north Anatolian fault zone (NAFZ) between Tasova and Alparslan in Amasya province in Turkey. These landslides extending over an area of 2.5 × 6.0 km are triggered by steepening of slopes due to undercutting by the Yesilirmak River and groundwater fluctuations. The landslides have affected 30 buildings in the western part of Tasova. In this study, in order to investigate the engineering geological characteristics of the landslides and their environmental impacts, representative samples from geological units were collected and a total of six boreholes were drilled. Plastic pipes were installed into the boreholes to measure the groundwater fluctuations and to determine the position of the sliding surface. For a two-year monitoring period, using a GPS linked to a fixed station system, the magnitude of the movements ranged between 11.7 and 17.6 cm at the toe of landslide. The landslides that occurred in the study area were in the form of retrogressive circular and multiple circular failures. The factor of safety along a number of cross-sections calculated by the limit-equilibrium method of analysis is 0.96 in static condition. After further analyses, construction of a toe buttress with surface drainage may be suggested as a remedial measure to minimize the effects of these landslides.     

The role of organic coatings in the enrichment of marine particles with selenium. The fixation of selenite on an adsorbed amino acid

The enrichment of marine particles with selenium cannot be explained as that with metals present in cationic form by complexation with anionic functional groups of adsorbed organic matter. Physicochemical data obtained using a model system are reported. The surface of the particles is modelized by a mercury electrode whose surface charge density can be easily changed, covered by a layer of adsorbed polymers. Studies with different kinds of macromolecules and salts show a specific interaction between adsorbed polyalanine and selenite. The results can be explained by the concordance of the distances between two oxygen atoms in this oxyanion and between two amine groups of the adsorbed polypeptide. A similar mechanism could occur in marine aggregates whatever their nature, as long as they contain amine groups at their surface which result in this concordance. Some prospects derived from the results are discussed.     

De nouveaux éléments structuraux du complexe aquifère profond du bassin du Rharb (Maroc) : implications hydrogéologiques

The Rharb basin is located in northwestern Morocco. It is a part of one of the most important hydrogeological basins of Morocco, and extends over some 4000 km². The nature of its Plio-Quaternary sedimentary fill and its structural and palaeoenvironmental contexts are reflected by great variations in aerial and temporal facies distribution. This distribution, in turn, is a direct cause of the observed complexity in the geometry of potentially water-bearing beds. In the present work, we present an image of potential new hydrogeological reservoirs and define new structures that partially explain their architecture. To cite this article: M. Kili et al., C. R. Geoscience 338 (2006).     

Geochemistry of Çoruh River Bed Sediments in NE Turkey: Implications in Weathering-Sedimentary Cycle,Provenance, and Metal Pollution

This study defines the source area, sub-aerial weathering, and sedimentary cycle level, as well as heavy metal content and origin, of the Çoruh River bed sediments. The studied sediments are geochemically classified as litharenite based on the ratio of the major element contents. Relative to the Upper Continental Crust (UCC), trace elements Rb, Sr, Ba, Th, U, Zr, Hf, Y, Nb, and Pb are generally depleted; Co, Ni, Cu, Sc, and V are generally enriched; and Au is depleted in some places and enriched in other places. The rare earth element (REE) distributions of the samples exhibit a trend similar to that of the upper continental crust (UCC); however, low to moderate depletion occurs in the bed sediments in UCC. The analyzed samples exhibit low Chemical Index of Alteration (CIA) values, Plagioclase Index of Alteration (PIA) values (<50), CIA/WIP (Weathering Index ratios <1), and substantially high Index of Compositional Variability values (ICV) (>1). Thus, the samples are not chemically mature and are mainly derived from non-altered sources and were exposed the simple cycling history. REEs are depleted in the river bed sediments, unlike the world river average silt, world river average clay, and suspended sediment in world rivers. Minor enrichment of Zn, Sn, and Sc contents, low-to-moderate enrichment of Cu content, very severe enrichment of as content, and extremely severe enrichment of Ni content of the analyzed samples are observed. Consequently, stream bed sediments are derived from intermediate sources close to mid-continental crust rather than felsic sources Low-to-moderate degrees of chemical weathering of these sediments indicate increased tectonic activity, increased erosion, and rapid sedimentation in semiarid to arid conditions in the source regions over time. Thus, the sediments are chemically immature. These sediments are exposed to lithogenic and anthropogenic contamination.     

Analysis of dry and wet climate characteristics at Uttarakhand (India) using effective drought index

Natural Hazards - Drought is a complex natural disaster that adversely affects human life and the ecosystem. A variety of drought indexes are available for monitoring meteorological drought events....     

台风菲特暴雨诊断分析

"菲特"台风暴雨具有阶段性特征,包括台风远距离降水、台风倒槽和内螺旋雨带降水、台风外部螺旋雨带降水、台风残留低压环流与冷空气相互作用降水4个阶段。利用地面观测、气象雷达观测、NCEP分析资料,对"菲特"台风暴雨环流形势进行了分析。引导台风东移的高压东西部具有不同热力属性,东部暖性深厚、西部冷性浅薄。浅薄冷高压阻挡登陆台风继续西移,延长台风倒槽和外围螺旋雨带的降水时间。"丹娜丝"台风的靠近,有利于东南风水汽输送的增强。副热带高压的增强,在黄海上空逼近东移高空槽形成稳定的高空急流。文章提出与传统垂直风切变大、高空急流强的冷空气阻挡型不同的侵入型冷空气和台风相互作用形势。侵入型冷空气从低层入侵,影响台风残留低压的外围环流。在低压外围环流的北部形成较强的东北风,并与海上的东风对峙辐合形成海岸锋。冷空气侵入型的空间不对称特征明显:对流有效位能东高西低,垂直风切变西北高东南低。残留低压的中层受冷空气影响较小,沿海地区的东南风持续的时间更长。中层高位涡区与地面海岸锋的互应,为变性的台风残留低压暴雨提供有利条件。     

Influence of long‐period filter cut‐off on elastic spectral displacements

The effect of the long‐period filter cut‐off, T_c, on elastic spectral displacements is investigated using a strong ground‐motion database from Europe and the Middle East. The relation between the filter and oscillator responses is considered to observe the influence of T_c for both analogue and digital records, and the variations with site classification, magnitude, filter order and viscous damping. Robust statistics are derived using the re‐processed European data to generalize the effects of the long‐period filter cut‐off on maximum oscillator deformation demands as a function of these seismological and structural features. Statistics with a 95% confidence interval are derived to suggest usable period ranges for spectral displacement computations as a function of T_c. The results indicate that the maximum period at which spectral displacements can be confidently calculated depend strongly on the site class, magnitude and filter order. The period range where reliable long‐period information can be extracted from digital accelerograms is twice that of analogue records. Copyright © 2006 John Wiley & Sons, Ltd.     

Short-Term Periodicities in Sunspot Activity and Flare Index Data during Solar Cycle 23

The short-term periodicities in sunspot numbers, sunspot areas, and flare index data are investigated in detail using the Date Compensated Discrete Fourier Transform (DCDFT) for the full disk of the Sun separately over the rising, the maximum, and the declining portions of solar cycle 23 (1996 – 2006). While sunspot numbers and areas show several significant periodicities in a wide range between 23.1 and 36.4 days, the flare index data do not exhibit any significant periodicity. The earlier conclusion of Pap, Tobiska, and Bouwer (1990, Solar Phys. 129, 165) and Kane (2003, J. Atmos. Solar-Terr. Phys. 65, 1169), that the 27-day periodicity is more pronounced in the declining portion of a solar cycle than in the rising and maximum ones, seems to be true for sunspot numbers and sunspot area data analyzed here during solar cycle 23.     

Critical evaluation of the customisation process of the UNDRR disaster resilience scorecard for cities to earthquake-induced soil liquefaction disaster events

Bulletin of Earthquake Engineering - As cities become larger and more densely populated the impacts of major earthquake events on city communities become more severe. Improving community resilience...     

Performance of shape indices and classification schemes for characterising perceptual shape complexity of building footprints in GIS

Shape characterisation is important in many fields dealing with spatial data. For this purpose, numerous shape analysis and recognition methods with different degrees of complexity have so far been developed. Among them, relatively simple indices are widely used in spatial applications, but their performance has not been investigated sufficiently, particularly for building footprints (BFs). Therefore, this article focuses on BF shape characterisation with shape indices and classification schemes in a GIS environment. This study consists of four phases. In the first phase, the criteria for BF shape complexity were identified, and accordingly, benchmark data was constructed by human experts in three shape complexity categories. In the second phase, 18 shape indices were selected from the literature and automatically computed in GIS. The performance of these indices was then statistically assessed with histograms, correlation matrix and boxplots, and consequently four indices were found to be appropriate for further investigation. In the third phase, two new indices (Equivalent Rectangular index and Roughness index) were proposed with the objective to measure some BF shape characteristics more efficiently. The proposed indices also were found to be appropriate with the same statistical assessment procedures. In the final phase, BF shape complexity categories were created with the pairs of six appropriate indices and four choropleth mapping classification schemes (equal intervals, natural break, standard deviation, and custom) in GIS. The performance of the index–scheme pairs was assessed against the benchmark data. The findings demonstrated that both new indices and two of the selected indices (Convexity and Rectangularity) delivered higher performance. The custom classification scheme was found more ideal to reveal absolute shape complexity with the index value ranges derived from the boxplots while the other classification schemes were more appropriate to reveal relative shape complexity.