Spectral Study of Ionized Xenon Using a Capillary Pulsed Discharge

This work presents preliminaries spectroscopic results about ionized xenon and xenon-helium mixture using a capillary pulsed discharge under several experimental results.     

Ocean floor222Rn standing crops in the Atlantic and Pacific Oceans

Excess²²²Rn standing crops have been calculated from bottom profiles obtained at 119 locations in the Atlantic and Pacific Oceans during the GEOSECS cruises. They range over more than two orders of magnitude with clear north-south and east-west patterns. The standing crops are inversely related to the sedimentation rate and the zones of highest standing crops are also areas which have a high coverage of manganese nodules.     

Evaluation of heavy metals and arsenic speciation discharged by the industrial activity on the Tinto-Odiel estuary, SW Spain

This study reports the annual amount of heavy metals discharged by industrial activity into the estuary of the Ría of Huelva (SW Spain). The findings showed that the discharged metals found in highest amounts were Fe (11 t y⁻¹), Zn (3.4 t y⁻¹) and Mo (0.88 t y⁻¹). There were other metals with high pollutant charge, such as Ti (232 kg y⁻¹), As (228 kg y⁻¹), Ni (195 kg y⁻¹), Pb (100 kg y⁻¹), Cr (39 kg y⁻¹) and Cd (33 kg y⁻¹). These results were compared with pollutants transported via the Tinto and Odiel rivers from abandoned mining activities in the Iberian Pyrite Belt (IPB), and it was deduced that the amounts spilled exclusively by industries were less than 1% in relation to the total discharge. Hence, the treatment of residues from the IPB should be the priority goal to improve water quality in the estuary.     

On the use of IPCC-class models to assess the impact of climate on Living Marine Resources

The study of climate impacts on Living Marine Resources (LMRs) has increased rapidly in recent years with the availability of climate model simulations contributed to the assessment reports of the Intergovernmental Panel on Climate Change (IPCC). Collaboration between climate and LMR scientists and shared understanding of critical challenges for such applications are essential for developing robust projections of climate impacts on LMRs. This paper assesses present approaches for generating projections of climate impacts on LMRs using IPCC-class climate models, recommends practices that should be followed for these applications, and identifies priority developments that could improve current projections. Understanding of the climate system and its representation within climate models has progressed to a point where many climate model outputs can now be used effectively to make LMR projections. However, uncertainty in climate model projections (particularly biases and inter-model spread at regional to local scales), coarse climate model resolution, and the uncertainty and potential complexity of the mechanisms underlying the response of LMRs to climate limit the robustness and precision of LMR projections. A variety of techniques including the analysis of multi-model ensembles, bias corrections, and statistical and dynamical downscaling can ameliorate some limitations, though the assumptions underlying these approaches and the sensitivity of results to their application must be assessed for each application. Developments in LMR science that could improve current projections of climate impacts on LMRs include improved understanding of the multi-scale mechanisms that link climate and LMRs and better representations of these mechanisms within more holistic LMR models. These developments require a strong baseline of field and laboratory observations including long time series and measurements over the broad range of spatial and temporal scales over which LMRs and climate interact. Priority developments for IPCC-class climate models include improved model accuracy (particularly at regional and local scales), inter-annual to decadal-scale predictions, and the continued development of earth system models capable of simulating the evolution of both the physical climate system and biosphere. Efforts to address these issues should occur in parallel and be informed by the continued application of existing climate and LMR models.     

The relationship between vertical eddy diffusion and buoyancy gradient in the deep sea

Vertical eddy diffusivities (K_v's) have been estimated at fourteen widely separated locations from fourteen²²²Rn profiles and two²²⁸Ra profiles measured near the ocean floor as part of the Atlantic and Pacific GEOSECS programs. They show an inverse proportionality to the local buoyancy gradient [(g/?)(??_pot/?z)] calculated from hydrographic measurements. The negative of the constant of proportionality is the buoyancy flux [?K_v(g/?)(??_pot/?z)] which has a mean of ?4 × 10^?6 cm²/sec³. Our results suggest that the buoyancy flux varies very little near the ocean floor. K_v's for the interior of the deep Pacific calculated from the relationship K_v = (4 × 10^?6cm²/sec³)/[(g/?)(??_pot/?z)] agree well with published estimates. K_v's calculated for the pycnocline are one to two orders of magnitude smaller than upper limits estimated from tritium and⁷Be distributions.Heat fluxes calculated with the model K_v's obtained from the²²²Rn profiles average 31 μcal cm^?2 sec^?1 in the Atlantic Ocean and 8 μcal cm^?2 sec^?1 in the Pacific Ocean.     

Conodont colour alteration indices (CAI) of Upper Ordovician limestones from the Iberian Peninsula

Conodont colour alteration index (CAI) data in Upper Ordovician rocks from several areas of the Variscan domain in the Iberian Peninsula indicate conditions ranging from diagenesis to low-grade metamorphism. In most of the areas, where studies using other indicators, such as illite crystallinity (IC) or where vitrinite reflectance are lacking, the CAI method has permitted a preliminary estimation of the metamorphic grade. In the Almadén syncline (Central-Iberian Zone), where IC studies are available, the thermal conditions inferred from CAI data agree with those obtained by the IC method. In the Puertollano–Almuradiel syncline, the thermal interval obtained primarily from fluid inclusions (270–370°C) overlaps considerably with that obtained from CAI data (180–340°C). In general, cleavage in rocks is present in anchizonal or epizonal conditions, whereas in diagenetic conditions with CAI 2.5, cleavage is scarce. The conodont texture changes with increasing metamorphism, and apatite recrystallisation appears in general with CAI 5. Variation of CAI values within a single sample and/or within short stratigraphic distances observed at several localities is due to hydrothermal activity.     

Assessment of phosphogypsum impact on the salt-marshes of the Tinto river (SW Spain): role of natural attenuation processes

About 120 Mton of phosphogypsum from the fertiliser industry were stack-piled on the salt-marshes of the Tinto river (Spain). This paper investigates the capacity of salt-marshes to attenuate contamination due to downward leaching from phosphogypsum. Solids and pore-waters were characterized at different depths of the pile to reach the marsh-ground. In superficial zones, metals were highly mobile, and no reduced sulphur was found. However, pollutant concentration decreased in the pore-water in deeper oxygen-restricted zones. Metal removal occurred by precipitation of newly formed sulphides, being this process main responsible for the contamination attenuation. Pyrite-S was the main sulphide component (up to 2528 mg/kg) and occurred as framboids, leading to high degrees of pyritization (up to 97%). The sulphidization reaction is Fe-limited; however, excess of acid-volatile sulphide over other metals cause precipitation of other sulphides, mainly of Cu and As. This decrease in metal mobility significantly minimises the impact of phosphogypsums on the salt-marshes.     

Refining the estimation of metal loads dissolved in acid mine drainage by continuous monitoring of specific conductivity and water level

The accurate estimation of metal loads transported by streams is necessary to calculate reliable mass transfers of metals between compartments, both at local and global scales. This estimation is particularly relevant in the case of the Tinto and Odiel Rivers (SW Spain) due to their significant contribution to the total metal transfer from continents to the ocean. At a local scale, the metal load transported by streams plays a key role in predicting the biogeochemical evolution of water reservoirs affected by Acid Mine Drainage (AMD). This work uses the relationships between specific conductivity (SC) and dissolved elements to calculate the metal load of the River Meca, a tributary of the Odiel. The SC and the water level were continuously monitored from April 2009 to June 2010. Water samples were also collected and measurements of the discharge were carried out manually once a month. The relationships between the SC and the concentration of dissolved elements are, in general, very good (R² > 0.90). However, some key elements such as Fe show a very poor correlation. A simple methodology based on the MIX code (a maximum likelihood method to estimate mixing ratios) was used to elucidate their different behaviours. During the dry period (April–December, 2009) the Fe concentration was lower than that deduced from the SC recorded value due to the precipitation of Fe-oxihydroxides, which also reduced the concentrations of As, Cr, Pb and, to a lesser extent, Cu. At the same time Na, Sr, Ca and Li were enriched because of the higher interaction with the riverbed materials. Correlations between the SC and the metal concentration improved significantly when each period was considered separately. A second dry period (April–June 2010) shows high SC values, although no dissolution/precipitation of solid phases is evidenced. This indicates that SC alone is not enough to predict the dissolved metal loads in Mediterranean AMD streams. The metal load transported by the River Meca was determined for the hydrological year 2009/10 as 1933 ± 129 tonnes of Fe, 990 ± 155 of Al and 378 ± 41 of Zn.     

Iron isotopes in acid mine waters and iron-rich solids from the Tinto–Odiel Basin (Iberian Pyrite Belt, Southwest Spain)

The isotopic composition of Fe was determined in water, Fe-oxides and sulfides from the Tinto and Odiel Basins (South West Spain). As a consequence of sulfide oxidation in mine tailings both rivers are acidic (1.45 < pH < 3.85) and display high concentrations of dissolved Fe (up to 420 mmol l^− 1) and sulphates (up to 1190 mmol l^− 1).The δ⁵⁶Fe of pyrite-rich samples from the Rio Tinto and from the Tharsis mine ranged from − 0.56 ± 0.08‰ to + 0.25 ± 0.1‰. δ⁵⁶Fe values for Fe-oxides precipitates that currently form in the riverbed varied from − 1.98 ± 0.10‰ to 1.57 ± 0.08‰. Comparatively narrower ranges of values (− 0.18 ± 0.08‰ and + 0.21 ± 0.14‰) were observed in their fossil analogues from the Pliocene–Pleistocene and in samples from the Gossan (the oxidized layer that formed through exposure to oxygen of the massive sulfide deposits) (− 0.36 ± 0.12‰ to 0.82 ± 0.07‰). In water, δ⁵⁶Fe values ranged from − 1.76 ± 0.10‰ to + 0.43 ± 0.05‰.At the source of the Tinto River, fractionation between aqueous Fe(III) and pyrite from the tailings was less than would be expected from a simple pyrite oxidation process. Similarly, the isotopic composition of Gossan oxides and that of pyrite was different from what would be expected from pyrite oxidation. In rivers, the precipitation of Fe-oxides (mainly jarosite and schwertmannite and lesser amounts of goethite) from water containing mainly (more than 99%) Fe(III) with concentrations up to 372 mmol l^− 1 causes variable fractionation between the solid and the aqueous phase (− 0.98‰ < Δ⁵⁶Fe_{solid–water} < 2.25‰). The significant magnitude of the positive fractionation factor observed in several Fe(III) dominated water may be related to the precipitation of Fe(III) sulphates containing phases.     

Dissolved and particulate metals and arsenic species mobility along a stream affected by Acid Mine Drainage in the Iberian Pyrite Belt (SW Spain)

Intensive mining has taken place in the Iberian Pyrite Belt since 3000 B.C. generating Acid Mine Drainage (AMD) and releasing high amounts of SO₄, acidity, metals and metalloids into surface water. Concentrations of elements in AMD-impacted waters are regulated by the precipitation of Fe-rich materials and particulate matter can influence the mobility and the bioavailability of metals. In this paper a study on the dissolved As species concentration along a polluted stream has been performed. Two sampling campaigns were conducted during the dry and the rainy seasons. Concentrations of dissolved elements are higher during the dry season and increase progressively along the water course in both seasons. Concentrations up to 80 μg L⁻¹ of As³⁺ and 5 mg L⁻¹ of As⁵⁺ were determined. The concentration of As species increases and the As³⁺/As⁵⁺ ratio decreases downstream. The Fe²⁺/Fe³⁺ and As³⁺/As⁵⁺ ratios show the same pattern with respect to pH for all the examined samples, except those taken from Au cyanidation wastes. The particulate phase is mainly composed of Fe, As and Pb, with As being associated with the Fe minerals while Pb seems to be associated with the clay colloids.