Geophysical anomalies associated with uranium mineralization from Beldih mine, South Purulia Shear Zone, India

Beldih mine at the central part of the South Purulia Shear Zone (SPSZ) has been reported with low grade uranium-bearing formation within quartz-magnetite-apatite host in kaolinized formation. Therefore, the present integrated geophysical study with gravity, magnetic, radiometric, very low frequency electromagnetic (VLF) and gradient resistivity profiling methods around the known mineralized zones aimed at identifying the exact geophysical signatures and lateral extent of these uranium mineralization bands. The closely spaced gravity-magnetic contours over the low to high anomaly transition zones of Bouguer, reduced-to-pole magnetic, and trend surface separated residual gravity-magnetic anomaly maps indicate the possibility of high altered zone(s) along NW-SE direction at the central part of the study area. High current density plots of VLF method and the low resistive zones in gradient resistivity study depict the coincidence with low gravity, moderately high magnetic and low resistivity anomalies at the same locations. Moderate high radioactive zones have also been observed over these locations. This also suggests the existence of radioactive mineralization over this region. Along profile P2, drilled borehole data revealed the presence of uranium mineralization at a depth of ～100 m. The vertical projection of this mineralization band also identified as low gravity, low resistivity and high magnetic anomaly zone. Thus, the application of integrated geophysical techniques supported by geological information successfully recognized the nature of geophysical signatures associated with the uranium mineralization of this region. This enhances the scope of further integrated geophysical investigations in the unexplored regions of SPSZ.     

Stability of fluorite and titanite in a calc-silicate rock from the Vizianagaram area, Eastern Ghats Belt, India

In the Vizianagaram area (E 83°29.442′; N 18°5.418′) of the Eastern Ghats Belt, India, a suite of graphite‐bearing calc‐silicate granulites, veined by syenitic rocks, developed wollastonite‐rich veins at 6–7 kbar and > 850 °C. During subsequent near‐isobaric cooling wollastonite was replaced by calcite + quartz and a graphic intergrowth of fluorite + quartz ± clinopyroxene. Titanite with variable Al and F contents is present throughout the rock. Combining the compositional variation of titanite and recent experimental data, it is demonstrated that the mineral assemblage, the composition of coexisting fluids and the mobility of Al exert a far greater control on the composition of titanite than pressure, temperature or the whole rock composition. Thermodynamically computed isothermal–isobaric logf_O2– logf_CO2 and logf_F2– logf_O2 grids in the systems Ca–Fe–Si–O–F (CISOF; calcite‐free) and Ca–Fe–Si–O–F–C–H (CISOFV; calcite‐present) demonstrate the influence of bulk rock and fluid compositions on the stability of the fluorite‐bearing assemblages in diverse geological environments and resolve the problem of the stability of titanite in fayalite + fluorite‐bearing rocks in the Adirondacks. The mineralogy of the studied rocks and the topological constraints tightly fix the logf_O2, logf_F2 and logf_CO2 at ?15.8, ?30.6 and 4.1, respectively, at 6.5 kbar and c. 730 °C. Because of the similarity in the P–T conditions, the compositions of pore fluids in the fluorite‐bearing assemblages of the Adirondacks and the Eastern Ghats Belt have been compared.     

Spectral factorization technique for estimation of an ARMA operator for multichannel deconvolution of seismic data

A new spectral factorization method is presented for the estimation of a causal as well as a causally invertible ARMA operator from the correlation sequence of seismic traces. The method has been implemented for multichannel deconvolution of seismic traces with the aim of exploiting the trace-to-trace correlation that exists within seismograms. A layered earth model with a small reflectivity sequence has been considered, and the seismic traces have been considered as the output of a linear system driven by white noise reflection coefficient sequences. The present method is the concatenation of three algorithms, namely Kung's method for state variable ( F , G , H ) realization using a singular value decomposition (SVD) algorithm, Faurre's technique for computation of the strong spectral factor and Leverrier's algorithm for ARMA representation of the spectral factor. The inverted ARMA operator is used as a recursive filter for deconvolution of seismic traces. In the example shown, two traces with a covariance sequence of 160 ms length have been considered for multichannel deconvolution of stacked seismic traces. The results presented, when compared with those obtained from a conventional deconvolution algorithm, have shown encouraging prospects.     

Performance of sand and shredded rubber tire mixture as a natural base isolator for earthquake protection

The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire(RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude( 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.     

Magneto-elastic waves and disturbances in initially stressed conducting media: II

Summary The paper is concerned with the investigation of the magneto-elastic waves and disturbances in initially stressed conducting media. Firstly, (a) the steady state response to moving loads in a magneto-elastic initially stressed conducting medium under an uniaxial tension has been discussed. Secondly, (b) the Lamb's problem corresponding to a line load suddenly applied in a magneto-elastic initially stressed conducting half-space bounded by a plane under uniaxial tension has been investigated. The final results obtained in both cases are in agreement with the corresponding classical problems when the initial tension is zero and the magnetic field is absent.     

An Upper Limit on the Ratio Between the Extreme Ultraviolet and the Bolometric Luminosities of Stars Hosting Habitable Planets

A large number of terrestrial planets in the classical habitable zone of stars of different spectral types have already been discovered and many are expected to be discovered in the near future. However, owing to the lack of knowledge on the atmospheric properties, the ambient environment of such planets are unknown. It is known that sufficient amount of Extreme Ultraviolet (EUV) radiation from the star can drive hydrodynamic outflow of hydrogen that may drag heavier species from the atmosphere of the planet. If the rate of mass loss is sufficiently high, then substantial amount of volatiles would escape causing the planet to become uninhabitable. Considering energy-limited hydrodynamical mass loss with an escape rate that causes oxygen to escape alongwith hydrogen, an upper limit for the ratio between the EUV and the bolometric luminosities of stars which constrains the habitability of planets around them is presented here. Application of the limit to planet-hosting stars with known EUV luminosities implies that many M-type of stars should not have habitable planets around them.     

GIS-enabled historiography to determine travel routes during the Western Han period via agent-based models and least-cost path analysis

GIS-enabled historiography allows us to shed light on missing or poorly understood aspects of historical events. Here, we use agent-based models (ABMs), least cost path analysis (LCPA), and space–time paths to recreate and evaluate possible modes and routes of travel undertaken by Shi Rao, a Western Han official. A diary was found in Shi Rao's tomb that includes information about his travels over 1 year (11 BCE), including start and end times of his journeys. But it leaves out details regarding modes of transport or exact routes. Using Tan Qixiang's historical atlas, we digitized river networks and utilized modern topographic data to digitally recreate the landscape as it was during Shi Rao's travels. This was then used to evaluate possible journeys via rivers (using ABMs) and roads (using LCPA), and compared to historical speed of boats, carts and horses, with findings indicating that horseback may have been the viable option.     

Evolution of high-Mg–Al granulites from Sunkarametta, Eastern Ghats, India: evidence for a lower crustal heating–cooling trajectory

A suite of high-Mg–Al granulites from Sunkarametta, Eastern Ghats Belt, India, shows contrasting prograde assemblages of extremely aluminous orthopyroxene+cordierite+sapphirine and similarly aluminous orthopyroxene+Ti-rich spinel in closely associated domains. Textural and compositional characteristics indicate that both were derived from prograde dehydration–melting of biotite–plagioclase–quartz-bearing protoliths. The former assemblage was stabilized at relatively more magnesian bulk composition. Geothermobarometric data and petrogenetic grid considerations place 'peak' metamorphic conditions at c. 950 °C and 9 kbar. Subsequent to peak metamorphism, the rocks cooled to c . 700–750 °C, with slight lowering of pressure, and the retrograde reactions also involved melt–solid interaction. The inferred P – T  trajectory is one of heating–cooling at lower crustal (25–30 km) depths.     

Primary volcanic structures from a type section of Deccan Trap flows around Narsingpur-Harrai-Amarwara, central India: Implications for cooling history

Field investigations of the Deccan Trap lava sequence along a 70 km traverse in the Narsingpur-Harrai-Amarwara area of central India indicate twenty lava flows comprising a total thickness of around 480 m. Primary volcanic structures like vesicles and cooling joints are conspicuous in this volcanic succession and are used to divide individual flows into three well-defined zones namely the lower colonnade zone, entablature zone, and the upper colonnade zone. The variable nature of these structural zones is used for identification and correlation of lava flows in the field. For twenty lava flows, the thicknesses of upper colonnade zones of eight flows are ∼5 m while those of eight other flows are ∼8 m each. The thicknesses of upper colonnade zones of remaining four flows could not be measured in the field. Using the thicknesses of these upper colonnade zones and standard temperature-flow thickness-cooling time profiles for lava pile, the total cooling time of these sixteen Deccan Trap lava flows has been estimated at 12 to 15 years.