The skin friction in the unsteady free-convection flow past an accelerated plate

In this paper the unsteady laminar free-convection flow of a viscous incompressible fluid, past an accelerated infinite vertical porous plate subjected to a constant suction (or injection) in considered. Numerical results for the skin-friction on the plate are obtained for the class of accelerated motions whose velocity is of the formU ₀ t ⁿ wheret is time,U ₀ a constant, andn is a positive integer. The skin friction tends to zero with increasingt when the Grashof number Gr=², the Prandtl number =1,n=0, and >0 which corresponds to suction.On leave of absence from the Department of Mathematics, University of Dhaka, Bangladesh.On leave from absence from the Department of Mathematics, University of Dar-es-Salaam, Tanzania.     

Rice research for food security and sustainable agricultural development in Asia: Achievements and future challenges

Rice is the major staple food of Asia, and an important source of employment and income in rural areas, particularly in low-income countries. Research has contributed significantly in achieving food security by increasing the yield potential of rice in irrigated systems, reducing the crop maturity period and achieving yield stability by developing resistance against major insects and diseases in the modern high-yielding varieties. Poverty is, however, still extensive in fragile rainfed rice ecosystems where rice yield has remained low, as scientists have yet to develop high-yielding varieties resistant to abiotic stresses and problem soils. Rice production needs to be increased by another 70% over the next 30 years to meet growing food needs. This has to be achieved with less land, less water, and less labor to accommodate the demand for these inputs from the expanding nonagricultural sectors. The challenge to the rice research community is to make further shifts in yield potential of rice for the irrigated systems, to close the yield gaps in the rainfed systems through developing resistance of high yielding varieties to abiotic stresses, and greater understanding of the interactions between genotypes and environment, developing durable resistance against pests and diseases to reduce farmers' dependence on harmful agrochemicals, and to increase efficiency in the use of water, labor and fertilizers. As further intensification of rice cultivation is inevitable, scientists must understand the negative environmental side-effects of increasing rice productivity, to develop appropriate mitigation options.     

Long-term seasonal rainfall forecasting: efficiency of linear modelling technique

Using the lagged (past) climate indices, including El Nino–Southern Oscillation (ENSO) and Indian Ocean Dipole (IOD) as input parameters and long-term spring rainfall as outputs, calibration and validation of the linear multiple regression (MR) models have been performed. Since Australian rainfall varies both temporally and spatially, the analysis on the linear MR models was performed on regional scale. These models show the capability of linear MR technique for long-term predictions of Western Australian spring rainfall. The emphasis was given to assess the statistical correlations between Western Australian spring rainfall and dominating large-scale climate modes. The efficiency of linear modelling technique was evaluated to predict seasonal rainfall forecasting. At the same time, the Pearson correlation (R), mean absolute error, root-mean-square error and Willmott index agreement (d) were used to assess the capability of MR models. The models which fulfilled the limits of statistical significances were used for the prediction of future spring rainfall using independent data set. The results indicate that during calibration periods maximum achievable correlations varied from 0.47 to 0.53 for the selected stations. In regard to predict peaks and troughs of rainfall time series, it was found that correlations between predicted and actual peaks varied from 0.82 to 0.94 and between predicted and actual troughs varied from 0.53 to 0.91.     

Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.     

Slow arsenic poisoning of the contaminated groundwater users

This paper gives impact of Arsenic contaminated water on human health as well as overview of the extent and severity of groundwater arsenic contamination in Bangladesh. Scalp hair is the most important part of the human body to monitor the accumulation of this type of poison. Therefore, an experiment has been carried out by Neutron Activation Analysis (NAA) at Atomic Energy Research Establishment (AERE), Savar, Dhaka, Bangladesh on human hair of corresponding tube well water users of these areas to determine the total accumulation of arsenic to their body. Hair samples collected from the region where the groundwater was found highly contaminated with arsenic. The obtained results of arsenic concentration in the lower age (Hb) categories of users (below 12 years of age users) is in the range of 0.33 to 3.29 /gmg/g (ppm) and that in the Hu categories (upper 12 years of age users) is 0.47 to 6.64 μg/g (ppm). Where as maximum permissible range is 1 ppm certified from WHO. Results show that the peoples are highly affected where the groundwater is highly contaminated with arsenic and acts as the primary source of arsenic poisoning among the peoples of those areas. The results indicate that human population is affected with arsenic locally using the contaminated water for a long time.     

Characterization of organic matter and depositional environment of Tertiary mudstones from the Sylhet Basin,Bangladesh

The Sylhet Basin of Bangladesh is a sub-basin of the Bengal Basin. It contains a very thick (up to 22 km) Tertiary stratigraphic succession consisting mainly of sandstones and mudstones. The Sylhet succession is divided into the Jaintia (Paleocene–late Eocene), Barail (late Eocene–early Miocene), Surma (middle–late Miocene), Tipam (late Miocene–Pliocene) and Dupitila Groups (Pliocene–Pleistocene), in ascending order. The origin of the organic matter (OM) and paleoenvironment of deposition have been evaluated on the basis of C, N, S elemental analysis, Rock-Eval pyrolysis and gas chromatography–mass spectrometry (GC–MS) analysis of 60 mudstone samples collected from drill core and surface outcrops. Total organic carbon (TOC) content ranges from 0.11% to 1.56%. Sulfur content is low in most samples. TOC content in the Sylhet succession varies systematically with sedimentation rate, with low TOC caused by clastic dilution produced by high sedimentation rates arising from rapid uplift and erosion of the Himalaya.The OM in the succession is characterized by systematic variations in pristane/phytane (Pr/Ph), oleanane/C₃₀ hopane, n-C₂₉/n-C₁₉ alkane, Tm/Ts [17α(H)-22,29,30-trisnorhopane/18α(H)-22,29,30-trisnorhopane] and sterane C₂₉/(C₂₇ + C₂₈ + C₂₉) ratios during the middle Eocene to Pleistocene. Based on biomarker proxies, the depositional environment of the Sylhet succession can be divided into three phases. In the first (middle Eocene to early Miocene), deposition occurred completely in seawater-dominated oxic conditions, with abundant input of terrestrial higher plants, including angiosperms. The second phase (middle to late Miocene) consisted of mainly freshwater anoxic conditions along with a small seawater influence according to eustasic sea level change, with diluted OM derived from phytoplankton and a lesser influence from terrestrial higher plants. Oxygen-poor freshwater conditions prevailed in the third phase (post-late Miocene). Planktonic OM was relatively abundant in this stage, while a high angiosperm influx prevailed at times. T_max values of ca. 450 °C, vitrinite reflectance (R_o) of ca. 0.66% and methylphenanthrene index (MPI 3) of ca. 1 indicate the OM to be mature. The lower part (middle Eocene to early Miocene) of the succession with moderate TOC content and predominantly terrestrial OM could have generated some condensates and oils in and around the study area.     

Role of Crystal Interlocking on the Strength of Brittle Rocks

Results of an experimental programme on heterogeneous rock-like specimens of dental plaster confirm the pronounced role of tensile microcracks on brittle failure. Microbuckling of very small rock-columns formed amid closely located tensile cracks was observed as the key incident connecting stable phenomenon of tensile cracking to unstable phenomenon of shearing and subsequent macroscopic failure. Using the classical beam and buckling theories and considering geometry of the problem a new failure criterion is proposed. As a novel attempt, this new failure criterion relates the compressive strength of rock to three basic microstructural properties, i.e. degree of crystal interlocking, average Young modulus and average tensile strength of rock forming minerals.     

Fracture analysis in Tabnak hydrocarbon field of Iran by using fractal geometry and multi-fractal analysis

High gas production from the Dashtak formation of Tabnak hydrocarbon field in Fars province, Iran, indicates the presence of natural fractured reservoir whose production potential is dominated by the structural fracture. The connectivity of fractured media depends upon the power?Claw exponent and the fracture density. Fracture pattern traces obtained from the outcrops of producing formations of six different stations in Tabnak hydrocarbon field. 2D fracture network maps of Tabnak hydrocarbon field have been analyzed from their scaling properties. The fractal analysis of fracture intensity showed heterogeneous multi-fractal structure characterized by generalized dimensions. Distribution of fracture lengths exhibits power?Claw behavior with specific exponent. Scaling laws serve to make extrapolations and to study the fracture connectivity related to scale. Fracture distribution model and reservoir productivity can be estimated, which are of great interest in decision making to optimize gas production.     

Shallow and deep aquifer hydrochemistry and chemical variability of water quality at Shariatpur district, Bangladesh

Water quality and hydrochemistry of Shariatpur district were evaluated in terms of hydrochemical composition and some important physico-chemical parameters. The groundwater of the study area is good for drinking, domestic as well as for irrigation purposes. Among the major ions, shallow tube well waters give higher concentration of Ca²⁺ which ranges from 24 to 260 mg/L. The deep tubewell waters show higher concentration of Na⁺ which varies from 74 to 582 mg/L during dry season. Among the trace elements most of the shallow aquifer samples show higher concentration of Fe²⁺, Mn²⁺ and As. Concentration of Fe²⁺ varies from 0.655 to 18.8 mg/L, and Mn²⁺ from trace to 0.868 mg/L during dry period. Hydrochemical analyses reveal significant seasonal variation in water quality of shallow aquifer. Both the shallow aquifer and the surface water of the study area are predominantly of Ca–Mg–HCO₃ type, while the deep aquifer water is mainly of Na–K–Cl–SO₄ type with slight inclination to Ca–Mg–HCO₃ type. The study area is suitable for groundwater development if comprehensive and holistic approaches towards water resource management are taken into consideration.